• S.A. Gernov, A.F. Sirenko , D. Hamana, « Influence of Deformation on the precipitation Kinetics of Supersaturated Solid Al+8% Mg Solution », Ukrainian Physical Journal, T29, N°3, p. 436-439, 1984.
  • S.A. Gernov, A.F. Sirenko, D. Hamana, « Précipitation of Supersaturated Solid Cu+10% In  Solution in Ultrasonic field », Physique du Corps Solide, N° 14, p. 36-40, 1984.
  • S.A. Gernov, A.F. Sirenko, D. Hamana, « Influence of Ultrasonic Vibrations on the Kinetic of Precipitation in Supersaturated Solid Al-8% Mg Solution », Physique du Corps Solide, N°14,  p. 40-43, 1984.
  • D. Hamana, N. Thabet, A.F. Sirenko, « Condition d’Apparition de la Précipitation Continue dans l’Alliage de Cuivre à 15 % en Poids d’Indium », Mémoires scientifiques de la Revue de Métallurgie, Février 1985, p. 97-103.
  • A.F. Sirenko,  D. Hamana, « Influence of Creep Deformation on the Kinetic of Precipitation of Supersaturated Solid Ag + 12 at % Cu Solution »  Métallofizika, T 7, N°2, p.94-98,1985
  • A.F. Sirenko, D. Hamana, « Influence of Deformation and Ultrasonic Vibrations on the Kinetic of Precipitation in Cu + 10 In Alloy », Physique du Corps Solide, N°15, p. 52-56,1985.
  • D. Hamana, M. Benabdoun, « Interaction Joint de Grain-Précipité au Cours du Fluage d’une Solution Solide Sursaturée d’Aluminium à 8% en Poids de Magnésium », Philosophical Magazine, V52, N°2, p. 25-28, 1985.
  • D. Hamana, R. Halimi, « Sphéroidisation des Lamelles à la Fin de la Précipitation  Discontinue  de  L’alliage  de Cuivre à 15% en Poids d’Indium »,  Scripta   Métallurgica , N° 19, p. 941-942, 1985.
  • A.F. Sirenko, D. Hamana, « Interaction Between Grain Boundaries and Precipitates During  Cellular  Precipitation  of  Solid  Solution »  Physique  du  Corps  Solide,          N° 16,43-47, 1986
  • R. Halimi, D. Hamana, E.M. Chpilevski, « Réaction à l’Etat Solide dans les Couches Minces du Système Binaire Cu/Sb »,  Thin Solide Films, 139, p. 147-155, 1986.
  • D. Hamana, S.A. Gernov, A.F. Sirenko, « Recuit d’Homogénéisation de l’alliage d’Aluminium à 8% en poids de Magnésium sous l’Action des Vibrations Ultrasonores »  Mémoires scientifiques de la revue de Métallurgie, Juillet-Aoùt 1987, p. 397-400.
  • D. Hamana, H. Choutri, « Analysis of Interface Reaction Between Cell and Grain  Boundary During Cellular Precipitation », Journal de Physique Supplément au N°1, T. 51, p.C1-827-C1-830, (1990).
  • D. Hamana, V.L. Avanessov, A.F. Sirenko, « Frottement interieur des alliages Al-Mg Vieillis », Scripta Metallurgica et Materialia, V. 24, N°1O, p. 2O13-2018. (1990).
  • D. Hamana, S. Nebti, S. Hamamda,  » Effect  of  the  Zirconium  Addition  on  the  Microstructure of Al + 8 wt % Mg Alloy », Scripta Metallurgica et Materialia, V. 24,             N°11, p.2059-2064. ( 1990).
  •  D. Hamana, H. Choutri, « Effect of Plastic Deformation on the Kinetics and Mechanism of  Cellular Precipitation », Scripta Metallurgica et Materialia, V 25, N°4, p. 859-864 ( 1991).

 

  • D. Hamana, A. Boutefnouchet, Z. Boumerzoug, « Interaction of Grain Boundary With Precipitate Particles During Aging » Materials Science Forum Vols 94-96, p. 627-634 (1992).
  •  D. Hamana,  S. Nebti, A. Boutefnouchet, S. Chekroud, « Precipitation and Recrystallization  in Aluminium Alloys », Ins. Phys. Conf. Ser. N°130, p. 287-290 (1992).
  •  D. Hamana, S. Nebti, A. Boutefnouchet, S. Chekroud, « Autocatalytic Continuous Precipitation in an Al-8 wt % Mg Alloy »,  Z. Metallkunde, V 84, N° 1, p. 33 (1993).
  •  D. Hamana,  S. Nebti,  Z. Boumerzoug, « The Similarity Between Continous and Discontinous Precipitation », Philosophical Magazine, A, V 67, N°5, p. 1143-1151 (1993).
  •  N.A. Dvorovienko, D. Hamana, S.A. Gernov, A.F. Sirenko, « Oscillation of Structure Characteristics in Polycrystalline Nickel During Plastic  Deformation »,  Acta   Metallurgica  et  Materialia, Vol. 41, N°7, p 2073-2076, 1993.
  • D. Hamana, Z. Boumerzoug, « Discontinous Precipitation, Coarsening and Dissolution of Phases in Cu-In and Cu-Sb Alloys », Z. Metallkunde, 85, 7, p. 479 (1994).
  •  N. Saheb, Z. Boumerzoug, D. Hamana, T. Laoui, O. Van Der Biest, « Different Types of Discontinuous Precipitation in Cu-15 wt % In Alloy »,  Scripta Metal.. Mater.,V32, N°9, 1453 (1995).
  •  S. Nebti, D. Hamana and G. Cizeron,   » Calorimetric  study  of pre-precipitation and precipitation in Al-Mg alloys », Acta  Metall. Mater., V 43, N°9, 3583 (1995).
  •  D. Hamana, Z. Boumerzoug and N. Saheb, « Cellular precipitation from phase boundaries in Cu-9 wt % Sb Alloy », Phil. Mag. Let. V 72 N° 6,  369 (1995).
  • D. Hamana,  S. Nebti  and M. Bouchear,  » On the  origin  of  the  heterogeneous   precipitation  in Al-Mg alloys », Z. Metallkunde 87, 2 p. 135 (1995).
  • – M. Bouchear, D. Hamana and T. Laoui, « GP zones precipitate morphology in aged Al-Mg alloys », Phil.Mag.A 73,6,p 1733 (1996).
  •  D. Hamana, Z. Boumerzoug, M. Fatmi and S. Chekroud, «Discontinuous and continuous precipitation  in Cu-13 wt Sn and Al-20 wt Ag», Mater. Chem. Phys. 53, p. 208 (1998).
  • A. Chala, L. Tidjani, D. Hamana et G. Cizeron, “Comportement de l’acier 53 Mn Si4 lors du revenu”Revue Sciences et Technologie de l’Université de Constantine n° 9, p. 15-18 (1998).
  • D. Hamana, M. Bouchear, A. Derafa, « Effect of plastic deformation on the transition phases formation and dissolution in Al-12 wt % Mg Alloy », Mater. Chem. Phys. V 57/2, p.99-110 (1998).
  •  S.A. Gernov, D. Hamana, N.A. Dvorovienko, V.I. Golaeyev, V.M. Tchmutov, « Development of rotational plasticity during deformation of Fe-1,5 wt pct Si alloy », Phil. Mag. Let., V 78, N° 3, p. 185-191 (1998).
  • D. Hamana and Z. Boumerzoug, “Cellular Precipitation at Different Sites in Copper Based Alloys”, Materials Science Forum, , Trans. Tech. Publications, V 294-296, p. 593-596 (1999).
  • A. Boutefnouchet, D. Hamana, G. Cizeron, “Evolution structurale en refroidissement continu de l’austénite d’un acier à haute résistance mécnaique 40 CDV 13”, Annales de Chimie, Sciences des Matériaux, 25, 653-662 (2000).
  • N. Ya Rokhmanov, D. Hamana, V.M. Andronov,«Nouvelle possibilité d’étude des propriétés des alliages métalliques par la méthode du frottement intérieur», Sciences etTechnologie 13, 29-34 (2000).
  • Z. Boumerzoug, and D. Hamana, ,«Different sites of discontinuous precipitation and mechanisms of dissolution in Cu-9 wt % Sb alloy», Mater. Chem. Phys., 69, 10-18 (2001).
  • D. Hamana, M. Bouchear, M. Betrouche, A. Derafa and N. Ya Rokhmanov ,«Comparative study of formation and transformation of transitions phases in Al-12Wt % Mg  alloy », Jour. of Alloys and  Compounds, 320, 93-102 (2001).
  • A. Boutefnouchet, D. Hamana, G. Cizeron, “Transformations isotherme d’un acier à haute résistance 40 CDV 13”, Sciences et Technologie, 15, 23-28 (2001).
  • N. Ya. Rokhmanov, D. Hamana, «Strutural aspect of Snoek relaxation in Fe-31,5 at. % Al alloy», University of Kharkov National University, N° 516, Serie Physics, V. 5 (2001).
  • D. Hamana, L. Baziz, M. Bouchear, «Mechanism and Kinetics of b’ Phase Formation in Al-Mg alloys », Mater. Chem. And Physics, V 84, p. 112-119, 2004.
  • M. Boufenghour, D. Hamana, A. Hayoune, « Study of the ordered structures in Fe-Al alloys using dilatometric and calorimetric analysis», Journal of Materials Sciences, 39, 4, p.1207-1212, (2004).
  • M. Boufenghour, D. Hamana, N. Ya. Rokhmanov, V. M. Andronov, « Mise en évidence par frottement intérieur et par diffraction des X d’une nouvelle phase tétragonale q dans l’alliage Fe-31,5 % at. Al », Revue de Métallurgie,-CIT, Sciences et Génie des Matériaux p. 663-669, Sept.2004.
  • R. Koutchoukali, D. Hamana, M. Bouchear, «Evaluation clinique de la vitrocéramique du système IPS Empress 2 avec armature en disilicate de Lithium » , Journal Algérien de Médecine, 1, XIII, p. 23 (2004).
  • M. Boufenghour, A. Hayoune, N. YA. Rokhmanov, M. Bouchear, D. Hamana « Dilatometric study of the ordered structures in Fe-Al  alloys » Functional Materials, 11, 2,  p. 397 (2004).
  • D. Hamana, A. Azizi, G. Tellouche, M. Bouchear, « G.P. Zones formation without quenched-in vacancies in Al-12 wt.%Mg alloy », Philosophical Magazine Letters, Volume 84, Number 11, November 2004, pp. 697-704 (8).
  • D. Hamana, A. Azizi, M. Bouchear, M. Boufenghour «Effet de la présence des phases sur les anomalies dilatométriques », Annales de Chimie, Sciences des Matériaux 31 (5), p. 501, 2006.
  • L. Amiour, M. Bouchear, D. Hamana, « Order-disorder transformation in Au-Cu system», Algerian Journal of Advanced Materials, 3, pp. 417-420 (2006)
  • A. Azizi, M. Boufenghour, D. Hamana, « Study of the order-disorder transition in Fe-30 % at. Al alloys obtained by rapid solidification», Algerian Journal of Advanced Materials, 3, pp.193-196 (2006). 
  • D. Hamana and A. Azizi,  « Low temperature post-precipitation after precipitation of b’ and b phases in Al-12 wt.% Mg alloy », Mater Sci; & Engng. A, V 476, N°1-2, pp.  357-365 (2008).
  • L. Hadjadj, R. Amira, D. Hamana and A. Mosbah,  «Jour. Alloys and Compounds”,462(2008)279-
  • A. Hayoune and D. Hamana, « Structural evolution during non isothermal ageing of Al-4.5 wt % Cu alloy by dilatometric analysis », Jour. Alloys and Compounds, 474 (2009) 118-123.
  • D. Hamana, L. Amiour and M. Bouchear, « Effect of chromium ternary addition on the ordering behaviour  in Fe-28% Al alloy », Mater. Chem And Physics, 112 (2008)816-822.
  • D. Hamana and L. Boumaza, « Dilatometric and calorimetric study of discontinuous reaction in Ag- 8 wt Cu alloy, Jour. Alloy and Compounds, 477 (2009)217-223.
  • D. Hamana, L. Amiour, L. Chetibi , , “The apparition of a new reaction at lower temperature in equiatomic CuAu alloy”, Phase Transitions V 82, n°10 (2009) 755-766.
  • A. Hayoune and D. Hamana, , “The effect of heating rate on the precipitation sequence in Al-12 wt % Mg alloy”, Materials Science and Engineering A 527  (2010)7061-7264
  • D. Hamana, L. Amiour, L. Chetibi, F. Hanini., “The possibility of New Ordering Reaction in Cu-50 wt % Au alloy», Materials Transactions, Vol. 52, No. 6 pp. 1132 to 1137 (2011
  • I. Golovin, Z. Belamri, D. Hamana., “Internal friction, dilatometric and calorimetric study of anelasticity in Fe–13 at.% Ga and Fe–8 at.% Al–3 at.% Ga alloys, Jour. of Alloys and Compounds, 509, 8065 (2011)
  • D. Hamana, M. Hachouf; L. Boumaza, Z.E. Biskri, «Precipitation mechanism in Cu-7 wt. % Ag alloy, Materials Sciences and Applications, 2, 899 (2011).
  • I.S. Golovin, M.Y. Zadarojni, A.S. Bykov et D. Hamana, “Dépendance en température et mécanisme du frottement intérieur dans les alliages du système Al-Mg”, Déformation et Rupture des Matériaux, n° 6, 22 (2012) (en russe).
  • Zehira Belamri, Djamel Hamana, Igor S. Golovin, Study of order-disorder transitions in Fe-Ge alloys and related anelastic phenomena, Journal of Alloys and Compounds 554 (2013) 348–356. 
  • Z. Belamri, D. Hamana, I.S. Golovin, Study of ordering in Fe-25%Al-Cr alloys by dilatometry, heat flow and mechanical spectroscopy, Monthly International Research Journal, Metallofizika i Noveishie Tekhnologii, Kiev, Ukraine, 2013, T. 35, N°2, cc, 209-223
  • L. Chetibi, A. Achour, J. Peszke, D. Hamana, S. Achour, « Hydroxyapatite growth on MWCNTs/TiO2/Ti”, J. Materials Science, 49, 621-632 (2014)
  • L. Chetibi, D. Hamana, S. Achour, “Growth and characterization of hydroxyapatite nanorice on TiO2 nanofibers”, J. Materials Chemistry and Physics, 144, 301-309 (2014).
  • L. Amiour, S. Mermoul, D. Hamana, “Study of the influenceof silver Addition on the order-dosorder Transformation in Cu-Au System”, Physics Procedia, V55, 30-34 (2014).
  • M. Hachouf, D. Hamana, “Study of the non-isothermal microstructural evolution of deformed Cu- 15wt %In and Cu-wt % Sb alloys by means of X-ray diffraction and dilatometry”, Journal of Alloys and Compounds, V622, p.29-36, 2015
  • I. Golovin,V.V. Palacheva, L.Yu. Dubov, Yu.V. Funtikov, J. Cifre, D. Hamana, « Study of ordering and properties in Fe-Ga alloy with 18 and 21 at% Ga,  Metallurgical and Materials Transactions A V 46A, p. 1131-1139, 2015
  • Zerari, M. Afrid & D. Groulx. Forced and mixed convection in the annulus between two horizontal confocal elliptical cylinders. International Journal of Thermal Sciences. 74. pp. 126-144. 2013.
  • Benissaad, M. Afrid & Z. Nemouchi. Numerical study of the opposing three dimensional thermosolutal natural convection. World Journal of Engineering. 3(4). pp. 76-87. 2006.
  • Benissaad & M. Afrid. Three dimensional numerical study of the double diffusion natural convection in cooperation case. World Journal of Engineering. 3(3). pp. 52-63. 2006.
  • Afrid & A. Zebib. « Three-Dimensional Laminar And Turbulent Natural Convection Cooling of Heated Blocks ». Numerical Heat Transfer, Part A, vol. 19, pp. 405-424, 1991.
  • Afrid & A. Zebib. « Oscillatory Three-Dimensional Convection in Rectangular Cavities and Enclosures ». Physics of Fluids A, vol. 2, No. 8, pp. 1318-1327, 1990.
  • Gervasio, A. Bottaro, M. Afrid & A. Zebib. « Oscillatory Natural Convection in a Long Horizontal Cavity ». Notes in Numerical Fluid Mechanics, edited by B. Roux, Viewg Verlag, Braunschweig, vol. 27, pp. 136-143, 1990.
  • Afrid & A. Zebib. « Natural Convection Air Cooling of Heated Components Mounted on a Vertical Wall ». Numerical Heat Transfer, Part A, vol.15, pp. 243-259, 1989.
  • Bouchoucha, Y.Mouadji, H. Zaidi, Influence du courant électrique et sa polarité sur la nature des films d’oxydes formés à l’interface du contact électrodynamique sec tournant cuivre-acier. édition presses universitaires romandes, France. pp. 223-232, 2007.
  •  M.A. Bradai, A. Sadeddine, Y. Mouadji, A. Benabbas, N. Bounar, A. Mammeri, Microstructural and mechanical propperties of Ni-base thermel spray coatings deposited by flam spraying. Metallurgical and Materials Transactions B, Springer July 2011.
  • Y. Mouadji, A. Bouchoucha, M.A. Bradai, H. Zaidi, Mechanical stress analysis in a dynamic graphite-graphite contact: consequences on wear. International Review of Mechanical Engineering (I.RE.M.E.), Vol. 05, n. 5. July 2011.
  • Y. Mouadji, A. Bouchoucha, H. Zaidi, A. Chekroude, A. Mekroude, Influence de l’antagoniste sur le comportement tribologique et thermique de couples de matériaux utilises pour les garnitures mécanique. Edition presses des Mines, MINESParisTech, France. pp. 319-328, 2012.
  • Y. Mouadji , A. Bouchoucha, M.A. Bradai, A. Belek, Numerical analysis of heat exchange in a dry friction contact between a pin and a rotating cylinder, Journal of Materials Science and Engineering (A, B). 2013.
  • Modelling of the interation of the dispersed and the continuous phases in liquid-liquid extraction column, A.-H. Meniai, A. Hasseine, O. Saouli and A. Kabouche, Multiphase flowresearch, 2009, Nova Science Publishers.
  •  

  • 1D reactive transport modeling inheterogeneous porous media, O. Saouli, M. Bencheikh-Lehocine, A.-H. Meniai, Chemical Engineering Transactions, 24, 415-420, 2011.
  • Three-dimensional modelling of reactive solutes transport in porous media, O.Saouli, M. Bencheikh-Lehocine, Chemical Engineering Transactions, 41, 151-156, 2014.
  •      A new reactor for industrialorganicelectrosynthesis, Roquero P., Ghanem-L A., Cognet P., Lacoste G., Berlan J., Fabre P.L. et Duverneuil P., Chem. Eng. Sci., Vol. 51, N° 10, 1847-1855 (1996).
  • Electroréduction de composés gem-dichlorés sous champ ultrasonore,Ghanem-L A., Cognet P., Berlan J., Fabre P.L. et Jud J.M.,Entropie, 19, 1, (1996)
  • Application of ultrasound technology to electroorganic synthesis: Reduction of acetophenone , Cognet P., Ghaem-L A., Berlan J., Wilelhm A.M., Delmas H., Fabre P.L., Chem. Eng. Sci.. Vol 55, N° 14, 2571  (2000)
  • Experimental Study of the Extraction of Iron(III) from Sulphuric Acid by means   of Sodium Diethyldithiocarbamate (SDDT),S.Touati, A.H Meniai, Recent Progrès en Génie des Procédés, N° 99,  pp 368 1-5, 2009, Ed SFGP.
  • Identification of the Formed Complex During Extraction of Copper(II) from Sulphuric Acid by means of Sodium Diethyldithiocarbamate (SDDT),S.Touati, A.H Meniai, Chemical Engineering Transaction N° 25, pp219-224, 2011, Doi: 10,3303/CET 1125037.
  • Experimental Study of the Extraction of Copper (II) from Sulphuric Acid by means of Sodium Diethyldithiocarbamate (SDDT), S.Touati, A.H Meniai, World Academy of Science Engineering and Technology, N° 76, pp 542-545, 2011
  • Solvent Extraction of Copper (II) from Sulphuric Acid by means of Sodium Diethyldithiocarbamate (SDDT) and Characterization of the Formed Complex, Theoritical Foundation of Chemical Engineering, N° 6, vol 46 , pp 719-726, 2012
  • “Fractional order extremum seeking approach for maximum power point tracking of Photo-Voltaic panels”. A. Neçaibia, S. Ladaci, A. Charef, J.J. Loiseau, Frontiers in Energy, Springer, (To appear 2015)
  •  “Self-tuning fractional order PIλDμ controller based on extremum seeking approach”. A. Neçaibia, S. Ladaci,International Journal of Automation and Control, Inderscience, Vol 8, Issue 2, pp. 99-121, July 2014DOI: 10.1504/IJAAC.2014.063361, http://www.inderscience.com/info/inarticle.php?artid=63361
  • “Fractional Order Adaptive Controller for Stabilised Systems via High-Gain Feedback”. A. Charef,M. Assabaa, S. Ladaci, and J.J. Loiseau, IET Control Theory and Applications, Vol 7, Issue 6, pp. 822-828, July 2013,DOI: 10.1049/iet-cta.2012.0309Print ISSN 1751-8644, Online ISSN 1751-8652
  •  “Fractional Order Multiple Model Adaptive Control”. S. Ladaci, K. Khettab, International Journal of Automation & Systems Engineering, Vol. 6, N°2, pp. 110-122, November 2012 http://jase.esrgroups.org/papers/6_2_4_12.pdf,
  • “Adaptive Control with Fractional Order Reference Model”. Y. Bensafia, S. LadaciInternational Journal of Sciences and Techniques of Automatic control & computer engineering, IJ-STA, Vol. 5, N°2, pp. 1614-1623, December 2011. http://www.sta-tn.com/IJ_STA/Papers/volume_5N2_dec_2011/P5_IJSTA_V5N2_11.pdf
  • “Adaptive Internal Model Control with Fractional Order Parameter” S. Ladaci, J.J. Loiseau and A. Charef,International Journal of Adaptive Control and Signal Processing, Wiley, Vol 24, pp. 944–960, October 2010.
  • “Robust Fractional Adaptive Control Based on the Strictly Positive Realness Condition”, S. Ladaci, A. Charef, J.J. Loiseau, International Journal of Applied Mathematics and Computer Science. Vol. 19, N°1, pp. 69-76, March 2009.http://www.amcs.uz.zgora.pl
  • “Fractional Order Adaptive High-Gain Controllers for a Class of Linear Systems” S. Ladaci, J.J. Loiseau & A. Charef,Communications in Nonlinear Science and Numerical Simulations, Elsevier, Vol 13, N°4.  pp. 707-714, July 2008. 
  • “Lp-stability analysis of a class of nonlinear fractional differential equations” S. Ladaci & E. Moulay,  International Journal of Automation & Systems Engineering, Vol. 2,N°1, pp. 40-47, March 2008.  http://www.jase.esrgroups.org
  •  “On fractional adaptive control”, S. Ladaci & A. Charef,  Nonlinear Dynamics, Springer, Vol. 43, N°4. pp. 365-378. March 2006.
  •  « Commande adaptative à modèle de référence d’ordre fractionnaire d’un bras de robot », S. Ladaci and A. Charef :  « Communication Sciences & Technologie » COST N°1, Octobre 2002, ENSET Oran, Algérie, pp. 50-52. http://www.enset-oran.dz/cost.php
    • « Why the critical current density of high-Tc’s vary anomalously with temperature, field and time. » S. Senoussi, C. Aguillon-Levillain,-F. Mosbah, P. Regnier; In « Progresses in High Temperature Superconductivity », edited by M. Baran, W. Gorzkowski and H.Szymczak, Ed. World Scientific, Singapore ISBN 981-02-0803-0, Vol. 30 pp. 80-135 (1992).
    • « A study of the microstructure and the critical current density of La1.85Sr0.15CuO4superconductor. »-F. Mosbah, H. Gu, S. Senoussi, S. Hammond, P. Manuel; Physica C Vol. 209 pp. 463 (1993).
    • « Collapse of the vortex pinning force in LaSrCuO forH // a-b planes. » S. Hammond,-F. Mosbah, S. Senoussi, P. Manuel, H. Kojima; Journal of Physics Condensed Matter Vol. 5 pp. L183- L188 (1993).
    • « The anisotropy of the irreversible magnetizations of YBCO and LaSrCuO: Evidence for a transition from Abrikosov to Josephson vortices in LaSrCuO. » Senoussi,M.-F. Mosbah, O. Sarrhini, S. Hammond; Physica C Vol. 211 pp. 288 (1993).
    • « The irreversibility line of a highly oxygenated melt texturedYBa2Cu3O7-y in T-H-t three dimensional space. » -F. Mosbah, S. Senoussi, K. Frikach, A. Taoufik, A. Fert, P. Odier; Physica C Vol. 235-240 pp. 2769-2770 (1994).
    • « Butterfly magnetization in YBa2Cu3-xFexO7-y: Correlation with the microstructure and the macrostructure. » S. Senoussi,-F. Mosbah, K. Frikach, S. Hammond, P. Manuel; Physical Review B; Vol. 53 pp. 12321 (1996).
    • « Influence of palladium on the unidirectional anisotropy field in NiMn disordered systems. » S. Hadjoudj, S. Senoussi,-F. Mosbah, Y. Öner; Journal of Magnetism and Magnetic Materials Vol. 175 pp. 328-332 (1997).
    • « Ag layer thickness dependence of magnetic properties in Fe/Ag superlattices. » F. Chemam, A. Bouabellou, R. Halimi and-F. Mosbah, Journal of Magnetism and Magnetic Materials, Vol. 211 pp. 320 (2000).
    • ”Elaboration and Characterization of Superconducting Ceramics Bi2Sr2CaCu2O8+d”. M. Mimouni, A. Amira, M. Bouguendoul,-F. Mosbah, A. Bouabellou; Physical & Chemical News (Maroc) Vol. 6 pp. 55-58 (2002).
    • « Structural and transport properties of superconducting ceramics Bi2Sr2CaCu2O8+d ». M. Mimouni, A. Amira, F. Kezzoula, A. Haouam,-F. Mosbah, A. Bouabellou; Physica B Vol. 321 pp. 287-291 (2002).
    • « Structural and magnetic properties of superconducting ceramics7Ca0.3Ba2Cu3OyFx, effect of fluorine addition ». A. Amira, M.-F. Mosbah, A. Leblanc, P. Molinié, B. Corraze ; Journal of Magnetism & Magnetic Materials Vol. 272-276 pp. El79-E181 (2004).
    • « Magnetic properties of superconducting ceramics6Pb0.4Sr2Ca2Cu3O10+d prepared by different methods ». A. Aït-Kaki, O. Belkhen, A. Amira, M.-F. Mosbah ; Physica Status Solidi c Vol. 1 pp. 1940-1943 (2004).
    • « Structure and transport properties of (calcium, fluorine) co-doped Y-based superconducting ceramics, effect of heat treatment ». Amira,M.-F. Mosbah, A. Leblanc, P. Molinié, B. Corraze ; Physica Status Solidi c Vol. 1 pp. 1944-1947 (2004).
    • « Praseodymium and Oxygen role on magnetic properties ofPrBa2Cu3O6+x ».  Harat, G. Fillion, J. Marcus, P. Haen , M.-F Mosbah, and M. Guerioune; Physica Status Solidi c Vol. 1 pp. 1948-1951 (2004).

     

  • « Improvement of magnetic properties of Bi­2212 ceramics by fluorine doping ». Amira,M.- F. Mosbah, P. Molinié, A. Leblanc, Solid State Science Vol. 7 pp. 53-57 (2005).
  • « AC susceptibility study of fluorine-doped Bi-2212 ceramics ». A. Amira, P. Molinié,-F. Mosbah, A. Leblanc, Journal of Magnetism & Magnetic Materials Vol. 292 pp. 186-191 (2005).
  • « Effect of Zn doping in Bi(Pb)-2212 superconducting ceramics ». Bouaïcha,M.-F. Mosbah, A. Amira, A. Ait-Kaki, N. Boussouf, Physica Status Solidi (c) Vol. 3 pp. 3036-3039 (2006).
  • « Effect of fluorine doping on La-1113 superconducting ceramics ». A. Amira, M.H. Arada,-F. Mosbah; Proceedings of the 10th International Conference of the European Ceramic Society, Ed. Göller Verlag, Baden-Baden, ISBN: 3-87264-022-4; pp. 780; (2007).
  • « Effect of doping by low concentration of iron on magnetic and structural properties of Bi2212″. Boussouf,M.-F. Mosbah, F. Bouaïcha, F. Benmaamar, A. Amira; J. Physics: Conf. Ser. Vol. 97 pp. 012262 (2008).
  • « Effect of PbO and AgNO3 addition on theBi2Sr2CaCu2Ox Superconducting system »; N. Boussouf,-F. Mosbah, T. Guerfi, F. Bouaïcha, Al-Azhar University Engineering Journal, JAUES Vol. 3 pp. 476 (2008).
  • « Thallium based superconducting thin films synthesized by rf-sputtering and ex-situ thallination »; T. Guerfi, S. Beauquis, P. Galez,-F. Mosbah, Materials Science Forum Vol. 609 pp. 173 (2009).
  • « Effect of co-doping by Pb and La on structural and magnetic properties of Bi2212 superconducting ceramics. » Ait Kaki, F. Benmaamar,-F. Mosbah, A. Amira, International Journal of Materials Research Vol. 100 pp. 1226-1229 (2009).
  • « Fe Doping effect on Structural Properties of Bi1.6Pb0.4Sr2CaCu1-xFexO8+δ» ; F. Bouaïcha, -F. Mosbah, A. Amira, S. Chamekh, N. Boussouf, Physics Procedia Vol. 2 pp. 1125-1128 (2009).
  • « The effects of Ag, Mg, and Pr doping on the superconductivity and structure of BSCCO »; N. Boussouf, M.-F. Mosbah, Guerfi, F. Bouaïcha,S. Chamekh, A. Amira, Physics Procedia Vol. 2 pp. 1153-1157 (2009).
  • » Substitution of Sr2+ by Eu3+ in Bi-2201 ceramics, effects on structure and physical properties »; A. Amira, F. Bouaïcha, N. Boussouf, -F. Mosbah, Solid State Science Vol. 12 pp. 699 (2010).
  • « Investigations onTlBa2Ca2Cu3Ox superconducting thin films formation on LaAlO3 substrate »; T. Guerfi Beauquis, P. Galez, M.-F. Mosbah, Thin Solid Films Vol. 518 pp. 4986 (2010).
  • « Effect of doping by low content of Yttrium at Ca and Sr sites of Bi(Pb)-2212 superconducting ceramics”; A. Amira, Y.Boudjadja, A. Saoudel, A. Varilci, M. Akdogan, C. Terzioglu,-F. Mosbah ; Physica B Vol. 406 pp. 1022-1027 (2011).
  • “Effect of fluorine doping on phase formation and properties of Bi(Pb)-2223 ceramics.” A. Amira, A. Saoudel, Y. Boudjadja, L. Amirouche, N. Mahamdioua, A. Varilci, M. Akdogan, C. Terzioglu,F. Mosbah, Physica C Vol. 471 pp. 1621-1626 (2011).
  • ” Effect of double substitution on structural and magnetic properties of Y1-xCaxBa2(Cu1- yMgy)3O7-d.” S. Attaf, M.F. Mosbah,  Fittipaldi, D. Zola, S. Pace, A. Vecchione, Physica C Vol. 477 pp. 36-42 (2012).
  • « Effect of Magnesium on the Bi-based (2212) Superconductors.” N. Boussouf,-F. Mosbah, F. Bouaïcha, A. Amira, Y. Boudjadja, A. Saoudel, Planetary Scientific Research Center Proceeding N° 5. Jan. 7-8, 2012 Dubai ISBN: 978-81-922428-4-2; pp. 318-321 (2012).
  • « Structural Properties of Zn Doped on Bi(Pb)2212 compound.” F. Bouaïcha,-F. Mosbah, N. Boussouf, A. Amira, Y. Boudjadja, A. Saoudel, Planetary Scientific Research Center Proceeding N° 5. Jan. 7-8, 2012 Dubai ISBN: 978-81-922428-4-2; pp. 458-461 (2012).
  • « The influence of doping with Ca and Mg inYBa2Cu3O7-δ  » S. Attaf, M.- .F Mosbah, A. Vecchione, R. Fittipaldi, EPJ Web of Conferences Vol. 29 pp. 00003 (2012).
  • « Synthesis of BiSrCa(Y)CuO superconductor from the sol-gel method and the effect of Y substitution.” S. Menassel,M-F. Mosbah,  P. Altintas, A. Varilci, and F. Bouaicha, AIP Conference Proceedings Vol. 1476 pp. 374-377 (2012).
  • « Effect of Al Substitution on Structural and Electrical Properties of Bi1.6Pb0.4Sr2CaCu2_xMxO8+δSuperconducting Ceramics. » F. Bouaïcha,-F. Mosbah, M. Hamel, F. Benmaamar, A. Amira, T. Guerfi, A. Haouam, L. Ozyuzer, Journal of Superconductivity and Novel Magnetism Vol. 26 pp. 1099 (2013).
  • « Effect of ZrO2 Addition on Microstructure, Transport and Magnetic Properties of Bi2Sr2CaCu2O8+δ» N. Boussouf, M.-F. Mosbah, A. Amira, A. Varilci, S. P. Altintas, M. Guerioune, Journal of Superconductivity and Novel Magnetism Vol. 26 pp. 1105 (2013).
  • « Effects of BCO3 Addition on the Formation and Properties of the Bi-Based Superconductors. » N. Boussouf,-F. Mosbah,Journal of Superconductivity and Novel Magnetism Vol. 26 pp. 2891 (2013).
  • « The effect of manganese on phase formation and properties of Bi2212 ceramics. » N. Boussouf,-F. Mosbah,Journal of Materials Science: Materials in Electronics August 2013 DOI 10.1007/s10854-013-1419-4.
    • Bani Kheiredine,Kerroum Derbal, Mossaab Bencheikh-Lehocine, “Effect of Inoculums to Substrate Ratio on Thermophilic Anaerobic Digestion of the Dairy Wastewater”, Chemical Engineering transactions Journal, Vol. 37, 518-524, (2014).
    • Bani Kheiredine,Kerroum Derbal, Mossaab Bencheikh-Lehocine, “Effect of starting pH on the produced methane from dairy waste in thermophilic phase”, Chemical Engineering transactions Journal, Vol. 38, 511-517, (2014).
    • Derbal Kerroum, Bencheikh-lehocine Mossaab, Meniai Abdessalam Hassen“Production of bio-energy from organic solid waste: effect of temperature and substrate composition”, Journal of Energy Research, Vol. 38, (2), 270-276, (2014).
    • Derbal Kerroum, Bencheikh-lehocine Mossaab, Meniai Abdessalam Hassen“Study of biodegradability of organic fraction of municipal solid waste”, Journal of Energy Procedia, Vol. 19, 239-248, (2012).
    • Derbal Kerroum, Bencheikh-lehocine Mossaab, Meniai Abdessalam Hassen“Pilot study of biogas production from organic solid waste in thermophilic phase”, Journal of Science Academy Transactions on Renewable Systems Engineering and Technology (SATRESET), Vol. 1, N° 3, September (2011).
    • Derbal Kerroum, Bencheikh-lehocine Mossaab, Meniai Abdessalam Hassen,“Use of ADM1 model to simulate the anaerobic digestion process used for sludge waste treatment in thermophilic conditions”, Turkish J. Eng. Env. Sci., 34, 121-129, (2010).
    • Derbal, M. Bencheikh-Lehocine, F. Cecchi, A-H. Meniai, P. Pavan, “Application of IWA model to simulate the anaerobic co-digestion of organic solids waste mixed with sludge in mesophilic conditions”, Bioressource Technology journal, 100, 1539-1543,(2009).
    • Derbal, M. Bencheikh-Lehocine, A-H. Meniai, A. Khalfaoui, “Modélisation d’un procédé biologique de traitements des déchets solides pour la production de l’énergie et la protection de l’environnement”, revue Science et Technologie section B de l’université Mentouri de Constantine, N° 27, Juin (2008).
    • Bentounsi and A. Nicolas, “On-line diagnosis of defaults on squirrel cage motors using FEM ”, I EEE Transactions Magnetics , vol.34 , n° 5 , Sept. 1998 , pp. 3511-3514. http://ieeexplore.ieee.org/xpl/freeabs all.j sp?arnumber=71 7828
    • Lebaroud, A. Bentounsi and M. Feliachi , “ For an accurate diagnosis of induction motor faults under distorte supply voltage ” , International Journal of Intelligent Automation and Soft Computing, Vol. 11, No 4, pp. 277-288, 2005, TSI Enterprises, INC., ISSN 1079-8587, USA. http://wacong.org/autosoft/auto/abstracts.html
    • Lebaroud, A. Bentounsi, “Detection Improvement Of The Broken Rotor Bars Of IM After Supply Disconnection

    , Journal of Electrical Engineering, JEEEC, Vol. 56, 11-12, pp. 322-326, 2005, ISSN 1335-3632, Bratislava, Slovakia. http://iris.elf.stuba.sk/JEEEC/index.html ; http://iris.elf.stuba.sk/cgi-bin/jeeec?act=pr&no=11-12 105

    • A. Hosani, M. Meribout, A. Al-Durra, K. Al-Wahedi, and S. Teniou, A New Optical-Based Device for Online Black Powder Detection in Gas Pipelines, IEEE Transactions on Instrumentation and Measurement, Vol. 63, No 9, pp. 2238-2252, Sep. 2014.
    • Teniou, M. Meribout, K. Al-Wahedi, A. Al-Durra, and E. Al-Hosani, A Near-Infrared-Based Magnetic Induction Tomography Solution to Improve the Image Reconstruction Accuracy in Opaque Environments, IEEE Transactions on Magnetics, Vol. 49, No 4, pp. 1361-1366, Apr. 2013.
    • Teniou, M. Meribout, and K. Belarbi, Real-time Reconstruction of Moving Objects in an Electrical Capacitance Tomography System using Inter-Frame Correlation, IEEE Sensors Journal, Vol. 12, No 7, pp. 2517-2525, Jul. 2012.
    • Teniou, and M. Meribout, A New Hierarchical Reconstruction Algorithm for Electrical Capacitance Tomography using a Relaxation Region-based Approach, Measurement, Vol. 45, Issue 4, pp. 683–690, May. 2012.
    • Teniou, M. Meribout, T. Al-Hanaei, F. Al-Zaabi, R. Banihashim, and S. Al-Ghafri, A New Constrained Hierarchical Reconstruction Method for Electrical Capacitance Tomography, Flow Measurement and Instrumentation, Vol. 23, Issue 1, pp. 66–75, Mar. 2012.
    • Teniou, and M. Meribout,Multiphase Flow Meters Principles and Applications: A Review, Canadian journal on scientific and industrial research, Vol. 2, No. 8, pp. 290-293, Nov. 2011.
    • BOUROUAIAH W., KHALFALLAH S., GUERDOUH D. (?) Effect of soil mechanical properties on RC wall system responses. Submitted for publication in Frontiers of Geotechnical Engineering Journal.
    • KHALFALLAH S. (2015) Analytical approach of tension stiffening contribution of GFRP-members. Journal of Applied Science and Engineering, Vol. 18(1), 2015, pp. 1-8.
    • KHALFALLAH S., GUERDOUH D. (2014) Tension stiffening approach in concrete of tensioned members. InternationalJournal of advanced Structural Engineering, Vol. 6:51, 2014. http://www.advancedstructeng.com/
    • « A Detailed Modelling Method for Photovoltaic Cells », R.Rachid, Makhlouf, T.kerbache, A.Bouzid, Energy 32 1724–1730, (2007).
    • « Vectorial Command of Induction Motor Pumping System Supplied By a Photovoltaic Generator », Makhlouf, F.Messai, H.Benalla, JEEEC Journal Vol. 62, No. 1,3-10 , 2011.
    • « Modeling and Simulation of Grid-connected Hybrid Photovoltaic/Battery Distributed Generation system», Makhlouf, F.Messai, H.Benalla, Canadian journal of EEE, Vol. 3, No. 1, January 2012.
    • « Modeling and control of single-phase grid connected photovoltaic system », Makhlouf, F.Messai, H.Benalla, JATIT journal, Vol 37. No. 2 pp 289 – 296, 2012.
    • « Nonlinear Modeling & Simulation of a Four phase Switched Reluctance Generator (SRG DS 8/6) Under Matlab/Simulink Environment system», F.Messai, Makhlouf, H.Benalla, Canadian journal of EEE, Vol. 3, No. 6, July 2012
    • « Nonlinear 8/6 Switched Reluctance Generator Excited by Particular Converter », F.Messai, Makhlouf, H.Benalla, JATIT journal, Vol. 45 No.1, pp 33-37, 2012
    • « Modeling And Simulation Of Grid-Connected Photovoltaic Distributed Generation System », F.Messai, Makhlouf, H.Benalla, JATIT journal ,Vol. 45. No. 2, pp 378 – 386, 2012
    • «Double salient switched reluctance generator for wind energy application» F.Messai, Makhlouf, H.Benalla, A.Messai , Révue des énergies renouvelable, CDER, Vol.17,issue N°1, pp.71 – 82, (2014).
    • « Nonlinear modeling and simulation of a four phase switched reluctance generator for wind energy applications», F.Messai, Makhlouf, A.Messai, K.Nabti, H.Benalla, JOCET Journal, Vol.1, No.2, pp 127-131, April 2013.
    • «Double salient switched reluctance generator for wind energy application», F.Messai, Makhlouf, H.Benalla, A.Messai, Revue des énergies renouvelable, CDER, Vol.17, issue N°1 (2014), pp.71 – 82.
    • Medoued Ammar, Lebaroud Abdesselem, » Classification of Induction Machine Faults using Time Frequency Representation and Particle Swarm Optimization “, Journal of Electrical Engineering & Technology, 9, No. 1: 170-177, 2014.
    • http://eng.kiee.or.kr/publication/paperasp
    • Bouchareb Ilhem, Bentounsi Amar and Lebaroud Abdesselam, “Fault detection and diagnosis in a set “inverter­switched reluctance motor” based on pattern recognition using Kalman filter prediction”, International Journal of Applied Electromagnetics and Mechanics, pp 495-502, (Print), IOS Press, 2014. http://iospress.metapress.com/content/11r81216864274q8/
    • Boukra Tahar.; Lebaroud Abdesselam.; Clerc Guy.” Statistical and Neural-Network Approaches for the Classification of Induction Machine Faults Using the Ambiguity Plane Representation”, IEEE Transactions on industrial electronics, vol. 60, no. 9, pp. 4034- 4042 , 2013. http://ieeexplore.ieee.org/Xplore/guesthome.jsp
    • Lebaroud Abdesselam, Medoued Ammar, “Online computational tools dedicated to the detection of induction machine faults”, ELSEVIER, International Journal of Electrical Power & Energy Systems, Volume 44, Issue 1, Pages 752-757, January 2013.
    • http://www.sciencedirect.com/science/article/pii/S0952197609000256
    • Medoued Ammar, Lebaroud Abdesselam, Sayad Djamel,”Application of Hilbert transform to fault detection in electric machines”, Advances in Difference Equations, Springer journal, January 2013. http://www.advancesindifferenceequations.com/
    • Bouchareb Ilhem, Bentounsi Amar and Lebaroud Abdesselam, “Torque Analysis of Faulty SRM using FEA-TFR Approach”, International Journal of Computer Applications, Published by Foundation of Computer Science, New York, 61(4): pp: 28-35, USA, January 2013.
    • http://www.ijcaonline.org/archives/volume61/number4/9916-4517
    • Bouchareb Ilhem, Bentounsi Amar, Lebaroud Abdesselam, “A comparative study of synchronous reluctance and switched reluctance motors for high-performance fault-tolerant applications”, International Journal of Applied Electromagnetics and Mechanics, Volume 39, pp. 793-799, 2012. http://iospress.metapress.com/content/1582h863h24011lk/
    • Lebaroud Abdesselam, Clerc Guy “Study of Rotor Asymmetry Effects of an Induction Machine by Finite Element Method” , JEET, Journal of Electrical Engineering & Technology, Vol. 6, No. 3, pp. 342~349, 2011 http://enew.kiee.or.kr/main/index.asp
    • Medoued Ammar, Lebaroud Abdesselem, Boukadoum Ahcen and Clerc Guy, “On-line Faults Signature Monitoring Tool for, Induction Motor Diagnosis “, Jou rnal of Electrical Engineering & Technology Vol. 5, No. 1, pp. 140~145,
    • http://eng.kiee.or.kr/publication/paperasp
    • Lebaroud Abdesselam and Clerc Guy, “Accurate diagnosis of induction machine faults using optimal time– frequency representations”, ELSEVIER, Engineering Applications of Artificial Intelligence N° 22 pp:825–832,
    • http://www.elsevier.com/wps/find/journaldescription.cws home/975/description#description
    • Lebaroud Abdesselam and Clerc Guy, “Classification of Induction Machine Faults by Optimal Time–Frequency Representations”, IEEE Transactions, Industrial Electronics, vol. 55, no. 12, pp: 4290 – 4298, December 2008. http://ieeexplore.ieee.org/Xplore/guesthome.jsp
    • Lebaroud Abdesselam, Abdelmalek Khezzar , Ammar Bentounsi , Guy Clerc ”Comparison of the Induction Motors Stator Fault Monitoring Methods Based on Current Negative Symmetrical Component”, European power electronics and drives (EPE) Journal, Vol. 17,no 1, Mars 2007.
    • http://www.epe-association.org/epe/index.php
    • Lebaroud Abdesselam, Bentounsi Amar, “Detection improvement of the broken rotor bars of IM after supply disconnection”, Journal of electrical engineering, ISSN1335-3632, vol. 56, No. 11-12, , 322-326, 2005. http://iris.elf.stuba.sk/JEEEC/
    • Lebaroud Abdesselam, Bentounsi Amar, “For an accurate diagnosis of induction motor faults under distorted supply voltage”, International journal of intelligent automation and soft computing, ISSN 1079-8587, vol.11, No.4, 277-288, 2005.
    • http://wacong.org/autosoft/auto/
    • Boukhmiss Chetate, Lebaroud Abdesselam, “Real-time Intelligent Failure Diagnosis of Electromachanical systems” Publication dans la Revue A.M.S.E , Advances in Modeling and Analysis, Vol. 41 N° 2, B, ISSN 0761- 2486, France, 1999, pp 39-51.
    • Boukhmiss Chetate, Lebaroud Abdesselam « Elaboration d’un Système Automatisé de Diagnostic de Pannes des Machines Electriques », Publication dans la Revue Ciments Bétons Plâtres Chaux N° : 823,6, pp 428-431, 1996
    • Kheiredine, Kerroum. Derbal, Mossaab. Bencheikh-Lehocine, Effect of Inoculums to Substrate Ratio on Thermophilic Anaerobic Digestion of the Dairy Wastewater, Chemical Engineering transactions Journal, Vol. 37, 518-524, (2014)
    • Kheiredine, Kerroum. Derbal, Mossaab. Bencheikh-Lehocine, “Effect of starting pH on the produced methane from dairy waste in thermophilic phase”, Chemical Engineering transactions Journal, Vol. 38, 511-517, (2014)
    • Derbal Kerroum, Bencheikh-lehocine Mossaab, Meniai Abdessalam Hassen “Production of bio-energy from organic solid waste: effect of temperature and substrate composition”, Journal of Energy Research, Vol. 38, (2), 270-276, (2014)
    • Derbal Kerroum, Bencheikh-lehocine Mossaab, Meniai Abdessalam Hassen “Study of biodegradability of organic fraction of municipal solid waste”, Journal of Energy Procedia, Vol. 19, 239-248, (2012)
    • Derbal Kerroum, Bencheikh-lehocine Mossaab, Meniai Abdessalam Hassen “Pilot study of biogas production from organic solid waste in thermophilic phase”, Journal of Science Academy Transactions on Renewable Systems Engineering and Technology (SATRESET), Vol. 1, N° 3, September (2011).
    • Derbal Kerroum, Bencheikh-lehocine Mossaab, Meniai Abdessalam Hassen, “Use of ADM1 model to simulate the anaerobic digestion process used for sludge waste treatment in thermophilic conditions”, Turkish J. Eng. Env. Sci., 34, 121-129, (2010).
    • Derbal, M. Bencheikh-Lehocine, A-H. Meniai, D. Bolzonella, M. Zanette, C. Cavinato, “Application of IWA model    to simulate the anaerobic co-digestion of organic solids waste mixed with sludge in thermophilic conditions”, Récents Progrès en Génie des Procédés, Numéro 99, pp 392-1, 392-6, 2-910239-72-1, Ed. SFGP, Paris, France (2009).
    • Derbal, M. Bencheikh-Lehocine, F. Cecchi, A-H. Meniai, P. Pavan, “Application of IWA model to simulate the anaerobic co-digestion of organic solids waste mixed with sludge in mesophilic conditions”, Bioressource Technology journal, 100, 1539-1543, (2009).
    • Derbal, M. Bencheikh-Lehocine, A-H. Meniai, A. Khalfaoui, “Modélisation d’un procédé biologique de traitements des déchets solides pour la production de l’énergie et la protection de l’environnement”, revue Science et Technologie section B de l’université Mentouri de Constantine, N° 27, Juin (2008) A numerical simulation of bond for pull-out tests – The direct problem. 2nd Symposium on Connections between steel and concrete, Stuttgart, Germany, September4th­7th,2007,pp.849-858,ISBN:978-3-89821 -.www.iwb.unstuttgart.de/Symposium/download/Invitation_Program.pdf
    • Ilhem Bouchareb, Amar Bentounsi, Abdesselam Lebaroud, «A Comparative Study of Synchronous Reluctance and Switched Reluctance Motors for HighPerformance Fault Tolerant Applications», IJAEM, Vol. 39, No.1-4, 2012, pp. 793-799. http://www.journaltocs.ac.uk/index.php?action=browse&subAction=subjects&publisherID=34&journalID=15356&pageb=6&userQueryID=&sort=&local page=1 &sorType=DESC&sorCol=1
    • Ilhem Bouchareb, Amar Bentounsi, Abdesselam Lebaroud, «Torque Analysis ofFaulty SRMusingFEATFR Approach», Int. Journal of Computer Applications (0975-8887), Vol. 61, No.4, January 2013, pp. 28-35. http://www.ijcaonline.org/archives/volume61
    • Ilhem Bouchareb, Amar Bentounsi, Abdesselam Lebaroud, « Fault Detection and Diagnosis in a Set InverterSwitched Reluctance MotorBased on Pattern Recognition Using Kalman Filter Prediction », IJAEM, Vol.45, No.1-4, pp. 1383-5416. http://iospress.metapress.com/content/11r81216864274q8/

     

     

    • D. Hamana,  » Conférence des Jeunes Savants », Kharkov (URSS), 1982.D. Hamana,  » Journées Scientifiques Nationales en Physique », 28-30 mai 1983, Université de Constantine.

    V.L. Avanessov , D. Hamana , A.F. Sirenko, « 10ème Conférence sur la Physique de la Plasticité », Kouibichev (URSS), juin 198A. F. Sirenko,  D. Hamana, « 1ère Conférence sur les joints de grains « , Oufa (URSS), Octobre 1983

    • D. Hamana, « 8ème Conférence de Physique du Solide », El-Minia, (Egypte), 1985. (1ère  Communication)
    • D. Hamana , M. Benabdoun,  » 8ème Conférence de Physique du Solide », El-Minia, (Egypte), 1985 (2ème Communication)

    M. Benabdoun, D. Hamana,  » 2ème Séminaire International des Sciences des Matériaux », 13-15 mai 1985, Université  de Constantine (1ère Communication)

    • D. Hamana,  « 2ème Séminaire International des Sciences des Matériaux »,13-15 mai 1985, Université de Constantine (2ème communication).
    • D. Hamana,  S. Achour,  » 7ème Congrès de Microscopie Electronique », Istanbul (Turquie), sept. 1985
    • D. Hamana,  » ECASIA 85 – Surface and Interface Analysis, Octobre 1985, Veldhoven ( Hollande) .
    • D. Hamana, M. Benabdoun,  »   ICXOM 11-  Microscopie  et   Microanalyse »,   London (Canada), 4-8 Aug.1986
    • D. Hamana,  » 9 ème Conférence de Physique du Solide » St Catherine (Egypte) , 1986
    • D. Hamana, S. Nebti, S. Hamamda,  » ICXOM 12 – Microscopie et Microanalyse », Cracow (Pologne), Aoùt 1989 (1ère Communication).
    • D.   Hamana,  S.   Hamamda,   K. Mirouh,  » ICXOM 12 – Microscopie et   Microanalyse », Crakow ( Pologne), Aoùt 89 (2ème Communication).
    • D. Hamana, H. Choutri,  » IIB 89 – Joint de Grains  – Interphase », 4-8 sept. 89,  Paris  (France)
    • D. Hamana, S. Nebti, A. Boutefnouchet, « Fall Meeting, MRS », Nov.  26 – Dec. 1, 1990, Boston (USA)
    • D. Hamana, A. Boutefnouchet, Z. Boumerzoug, » International Conférence on Grain  Growth in Polycristalline Materials », Rome (Italy), 18- 21 June , 1991.
    • D. Hamana, Z. Boumerzoug, K. Mirouh, »IIB 92 – Joints de grains – Interphase »,  June 21- 26 1992, Thessaloniki (Greece).
    • D. Hamana,  S. Nebti, A. Boutefnouchet, S. Chekroud, « ICXOM 13, Microscopie et  Microanalyse » – Manchester, (Angleterre), 31 Aug.- 4 Sept. 1992.
    • D. Hamana, S. Nebti et Z. Boumerzoug, 4èmes Journées de Sciences des Matériaux, 22.23/11/94, Casablanca (Maroc)
    • D. Hamana, Z. Boumerzoug, XVIII Solid State Physics Congres, Suez (Egypt), 22- 26/01/95.
    • S. Nebti, D. Hamana, G. Cizeron, PIRM I, El Jadida (Maroc), 24-26 Mai 1995.
    • D. Hamana, M. Bouchear, Inter. Metallography Conf. MC 95, Colmar (France) , 10-12 Mai 1995.
    • D. Hamana and Z. Boumerzoug, 7th Inter. Conf. Intergranular and Interphase Boundaries  in Materials, Liboa (Portugal), June 26-29 1995.
    • M. Bouchear, S. Nebti and D. Hamana, 1er Congrés National des la Physique et ses  Applications, Alger 13-15 juin 1995.
    • Z. Boumerzoug and D. Hamana, 1er Congrés National des la Physique et ses Applications,  Alger 13-15 juin 1995.
    • N. Ya. Rokhmanov, D. Hamana and V.M. Andronov, « Phénomènes de relaxation dans les  corps solides », Voronej (Russie), 5-9 sept. 1995.
    • N. Ya. Rokhmanov, D. Hamana, XIX Conference on Solid State Sciences, March 13-17, 1996, Ismailia, Egypt.
    • .Fatmi et D.Hamana, 5ème Journées Maghrébines des Sciences des Matériaux, Hamamet (Tunisie), 8-10 Nov 1996.
    • M. Bouchear, D. Hamana, ELACAM98, Alger 2-4 juin 199
    • H. Bouderba, M. Bouchear, D. Hamana, ELACAM98, Alger 2-4 juin 1998
    • D. Hamana, M. Bouchear , J’NESMA 98, Tamenfoust 25-27 mai 199
    1. D. Hamana and Z. Boumerzoug, IIB 98, Prague, Czech Republic, 6-8 July 1998.
    • M. Bouchear, D. Hamana, G. Cizeron , Journées d’Automne 1998, Paris, 27-29 octobre 1998
    • . Hamana, M. Bouchear , Journées d’Automne 1998, Paris, 27-29 octobre 1998.
    • M. Bouchear, D. Hamana, 6ème Journées Maghrébines des Sciences des Matériaux,  Annaba (Algérie), 8-10 Nov 1998.
    • M. Bouchear, H. Bouderba, D. Hamana 6ème Journées Maghrébines des Sciences des  Matériaux, Annaba (Algérie), 8-10 Nov 1998.
    • A. Boutefnouchet, D. Hamana, G. Cizeron, Journées Maghrébines des Sciences des Matériaux, Annaba (Algérie), 8-10 Nov 1998
    • D. Hamana, M. Bouchear and H. Bouderba, XXI Conference on Solid State Sciences, Februrary 23-26, 1999, Mansoura, Egypt
    • D. Hamana, M. Bouchear and H. Bouderba, XXI Conference on Solid State Sciences, Februrary 23-26, 1999, Mansoura, Egypt.
    • . Hamana, M. Bouchear, Rex’99 – JIMIS-10, July13-16, 1999, Tsukuba (Japan).
    • D. Hamana, N. Belhadj and M. Bouchear, REMCES VIII, 27-29 october 1999, Tetouan  (Maroc).H. Bouderba, D. Hamana, M. Bouchear, CISGM, 27-30 novembre 1999, Alger (Algérie)
    • D. Hamana, M. Boufenghour, M. Hachouf et L. Hadjadj, 1ères JNM 2000, 02-04 mai
    • 2000, Alger (Algérie)
    • M. Bouchear, G. Tellouche, D. Hamana, 1ères JNM 2000, 02-04 mai 2000, Alger,  (Algérie).
    • D. Hamana, M. Bouchear , J’NESMA 2000, Tamenfoust 30,31 mai 2000, Alger (Algérie).
    • . Hamana, M. Bouchear, Journées d’Automne 2000, SF2M, Paris, 17-19 octobre 2000.M. Boufenghour, M. Hachouf, D. Hamana  et L. Hadjadj, Congrés Euro Méditerranéen de  la matière condensée CEMMC, Tlemcen, 04-06 Juin 2001(Algérie)
    • M. Bouchear, D. Hamana et Belhadj, The Second Arab Congress on Materials Science,  Rabat, 25-27 Octobre 2001 (Maroc)

    D. Hamana, M. Bouchear, G. Tellouche et L. Baaziz, The Second Arab Congress on  Materials Science, Rabat, 25-27 Octobre 2001 (Maroc).

    • R. Koutchoukali et D. Hamana, The Second Arab Congress on Materials Science, Rabat, 25-27 Octobre 2001 (Maroc).
    •  S. Chekroud, M. Boufenghour et D. Hamana, The Second Arab Congress on Materials  Science, Rabat, 25-27 Octobre 2001 (Maroc).
    • A. Boutefnouchet, D. Hamana et G. Cizeron, The Second Arab Congress on Materials  Science, Rabat, 25-27 Octobre 2001 (Maroc).
    •  N. Ya Rokhmanov, D. Hamana, V. M. Andronov, Proc. V-th International conf., Kharkov,  KhNU, p. 40, 25-26 Oct. 2001(Ukraine).
    •  D. Hamana, G. Tellouche et M. Bouchear, Deuxième Congrès international en  Sciences  et Génie des Matériaux, Annaba, 13-14 Novembre 2001(Algérie).

    R. Koutchoukali, H. Boukaabache, D. Hamana, M. Bouchear,  10ème Journée Médico-

    Dentaire, Secteur Sanitaire Constantine, 18 Mars 2002, Constantine (Algérie).

    • R. Koutchoukali, D Hamana , M. Bouchear,  6ème  Congrès national S.A.M.D 26-28 Mars  2002, Annaba  (Algérie).
    • R. Koutchoukali, H.Boukaabache, D. Hamana, M. Bouchear,  7ème Journée Médico-Chirurgicale,  5ème R.M. 21-23 Mai 2002, Constantine  (Algérie)
    • D. Hamana, G. Tellouche, M. Bouchear, JCM8, P. 1609, Marseille, France, 27-30 Août 2002.
    • D. Hamana, M. Bouchear, L. Baziz, G. Tellouche, JCM8, P. 1610, Marseille, France, 27- 30 Août 2002.
    • M. Hachouf, M. Boufenghour, D. Hamana, JCM8, P. 1610, Marseille, France, 27- 30 Août 2002.
    • D. Hamana, M. Bouchear, the XXIII Conference on solid state science, P. 117, Sharm El-Sheikh, Sinai, Egypte, 28- 02 Oct. 2002.
    • D. Hamana, M. Boufenghour, A. Hayoune, N. Ya. Rokhmanov, the XXIII Conference on     solid state science, P. 138, Sharm El-Sheikh, Sinai, Egypte, Sept. 28-  Oct. 02, 2002.
    • Z. Boumerzoug, L. Baci,  D. Hamana, ,« Materiaux 2002 », October 21-25, Tours, France.
    • L. Baaziz, M. Bouchear et D. Hamana, 5ème Congrès de la Physique et ses applications  CNPA’2002, 28-30 Oct. 2002  Université de Batna.
    • Hachouf, M. Boufenghour et D. Hamana, 5ème Congrès de la Physique et ses applications  CNPA’2002, 28-30 Oct. 2002  Université de Batna.
    • M. Boufenghour, A. Hayoune et D. Hamana, 5ème Congrès de la Physique et ses applications  CNPA’2002, 28-30 Oct. 2002  Université de Batna.
    • R. Koutchoukali, M. Bouchear, D. Hamana, 6émes journées médico-chirurgicales 05/06/07 mai 2003, ORAN.
    • L. Baaziz, D. Hamana et M. Bouchear, First International Conference on Materials Science    and Engineering, 7-9 May 2003 Université de M’sila.
    • M. Boufenghour, A. Hayoune, Rokhmanov N. Ya;, M. Bouchear, D. Hamana, « Structural  relaxation in solids », May 13-15, 2003, Vinnitsa, Ukraine.
    • D. Hamana, L. Baaziz, M. Bouchear, « Structural relaxation in solids », May 13-15, 2003 Vinnitsa, Ukraine.
    • N. Ya. Roklhmanov, V.M. Andronov, D. Hamana, I. S. Golovin,« Structural relaxation in  solids », May 13-15, 2003, Vinnitsa, Ukraine.
    • R. Koutchoukali, M. Bouchear, D. Hamana, « les aspects de surfaces des céramiques dentaires », 4èmes journées de médecine dentaire, 21/22mai 2003, Alger.
    • R. Koutchoukali, M. Bouchear, D. Hamana,  « comportement à la lumière des différents types de reconstructions prothétique », 4èmes journées de médecine dentaire 21/22mai 2003, Alger.
    • R. Koutchoukali, M. Bouchear, D. Hamana, « Quelles empreintes pour quelle situations cliniques  » 4èmes journées de médecine dentaire 21/22mai 2003, Alger.
    • M. Bouchear, R. Koutchoukaki, D. Hamana, “13ème Congrès Nationale de Médecine  Dentaire, 12 –13 décembre 2003. Tunis.
    • R. Koutchoukaki, D. Hamana, M. Bouchear, Bencheikh El Fegoun, 13ème Congrès Nationale  de Médecine Dentaire“, 12 –13 décembre 2003, Tunis.
    • A.S. Bencheikh El Fegoun, R. Koutchoukaki, D. Hamana, M. Bouchear13ème Congrès  Nationale de Médecine Dentaire“, 12 –13 décembre 2003, Tunis.
    • D. Hamana, « IXèmes journées Maghrébines des Sciences des Matériaux », JMSM’2004,Oran 8-10 mai 2004, Algérie.
    • A. Bencheikh-El-Fegoun,  R. Koutchoukali, D. Hamana, M. Bouchear, 3ème Journée Scientifique Dentaire, 12 Mai 2004, Constantine.
    • D. Hamana, M. Bouchear, 3ème Congrès International en Sciences et Génie des Matériaux”,  CISGM3 – 3rd ICMSE ; Jijel, 25 – 27 mai 2004, Algérie.
    • R. Koutchoukali, D. Hamana, M. Bouchear, 5ème Journées Médico-chirurgicales d’El-Eulma, 26-27 Mai 2004, Sétif.
    •  A. Azizi, M, Boufenghour, D. Hamana; 3ème Congrès International en Sciences et Génie des  Matériaux”, CISGM3 – 3rd ICMSE , Jijel, 25 – 27 mai 2004. Algérie.
    • R. Mechiakh, M. Bouchear, D. Hamana, 3ème Congrès International en Sciences et Génie des  Matériaux”, CISGM3 – 3rd ICMSE ; Jijel 25 – 27 mai 2004. Algérie.
    • L. Hadjadj, A. Menand, D. Hamana, 3ème Congrès International en Sciences et Génie des  Matériaux”, CISGM3 – 3rd ICMSE, Jijel 25 – 27 mai 2004, Algérie.
    • A. Azizi, M. Boufenghour et D. Hamana, 6èmes Congrès National de la Physique et ses Applications, Tizi Ouzou, Algérie, 5-7 decembre 2004.
    • R. Koutchoukali, A. Bencheikh-El-Fegoun, D. Hamana, M. Bouchear, R. Bouhai, Congrès International de Médecine Dentaire, Tunis, Tunisie, 10-12 décembre (2004).
    • M. Bouchear, R. Koutchoukali, D. Hamana, C. Fersadou, Congrès International de Médecine Dentaire, Tunis, Tunisie, 10-12 décembre (2004).
    • R. Koutchoukali, N. Salah Derradji, D. Hamana, M. Bouchear, Congrès International de Médecine Dentaire, Tunis, Tunisie, 10-12 décembre (2004).
    • L. Amiour, M. Bouchear, D. Hamana, 2ème Congrès Algérien de Cristallographie, 17-21 Avril 2005, Constantine, Algérie
    • L. Boumaza, D. Hamana, 2ème Congrès Algérien de  Cristallographie, 17-21 Avril 2005,  Constantine, Algérie.
    • R. Koutchoukali, A. Azizi, D. Hamana, A. Bouchear, 15èmes Congrès National de Médicine Dentaire, Tunis, Tunisie, 9-11 decembre (2005)
    • R. Koutchoukali, A-E Noucer, D. Hamana, A. Bouchear, A. Azizi, 15èmes Congrès National de medicine dentaire, Tunis, Tunisie, 9-11 decembre (2005)
    • A. Ayadi, L. Boumaza, M. Bouchear, D. Hamana, Journée Internationale des Sciences des Matériaux, 01 Mars 2006, Biskra, Algérie.
    • H. Bensouyad, A. Hayoune, A. Azizi, D. Hamana, M. Bouchear, Journée Internationale des Sciences des Matériaux, 01 Mars 2006, Biskra, Algérie
    • L. Boumaza, D. Hamana, 5èmes Journées de Mécanique de l’EMP, le 28-29 mars 2006,  Borj El Bahri, Algérie
    • H. Bensouyad, A. Hayoune, D. Hamana, 5èmes Journées de Mécanique de l’EMP, le 28-29 mars 2006, Borj El Bahri, Algérie.
    • L. Amiour, M. Bouchear, D. Hamana, The 4rd Int. Cong. Mat. Scie. & Eng., 2-4 mai 2006, Tlemcen, Algérie,.
    • A. Azizi, M. Boufenghour, D. Hamana, The 4rd Int. Cong. Mat. Scie. & Eng., 2-4 mai 2006,  Tlemcen, Algérie,.
    • L. Boumaza, D. Hamana, M. Bouchear, 5èmes Conférence Internationale sur la Science des Matériaux (CSM5), 17-19 Mai 2006, Beyrouth, Liban.
    • L. Amiour, M. Bouchear, F. Hanini, D. Hamana, 5èmes Conférence Internationale sur les Sciences des Matériaux (CSM5), 17-19 Mai 2006, Beyrouth, Liban.
    • A. Azizi, N. Laouici, D. Hamana, M. Bouchear, 5èmes Conférence Internationale sur les Sciences des Matériaux (CSM5), 17-19 Mai 2006, Beyrouth, Liban.
    • L. Boumaza, D. Hamana, Journées Internationales des Sciences des Matériaux, 04-05 mars 2007,  Biskra, Algérie.
    • L. Hadjadj, R. Amira, D. Hamana et P. Auger, Journées Internationales des Sciences des Matériaux, 04-05 mars 2007, Biskra, Algérie.
    • A. Ayadi, A. Hayoune, D. Hamana, M. Bouchear, 2ème Colloque Tunisien sur les Sciences des Matériaux, Hammamet, Tunisie – 7-10 avril 2007.
    • L. Amiour, F. Hanini, D. Hamana, M. Bouchear, 2ème Colloque Tunisien sur les Sciences des Matériaux, Hammamet, Tunisie – 7-10 avril 2007.
    • R. Koutchoukali, M.S. Aida, D. Hamana, L. Hadjadj, 2ème Colloque Tunisien sur les Sciences des  Matériaux, Hammamet, Tunisie – 7-10 avril 2007.
    • L. Amiour, F. Hanini, D. Hamana, M. Bouchear, The 5th  Arab Congrès on Materials Science, Gabes, Tunisie – 23-25 octobre 2007.
    • M. Bouchear, A. Mechiakh, D. Hamana, , The 5th  Arab Congrès on Materials Science,  Gabes, Tunisie – 23-25 octobre 2007.
    • D. Hamana, L. Chetibi, L. Amiour, XI JMSM , Mahdia, Tunisie – 04-08 Nov. 2008
    • D. Hamana, L. Chetibi, L. Amiour, XI JMSM , Mahdia, Tunisie – 04-08 Novembre 2008
    • R. Koutchoukali, E. Nouicer, M.H. Khireddine, D. Hamana, S. Chekroud, XI JMSM , Mahdia, Tunisie – 04-08 Novembre 2008.
    • L. Hadjadj, R. Amira, D. Hamana, A. Menand, –The first international Conference on Metallurgy ICM 2009, Biskra, 4-è5 mars 2009.
    • L. Hadjadj, R. Amira, D. Hamana, A. Menand, –The first international Conference on Metallurgy ICM 2009, Biskra, 4-è5 mars 2009.
    • M. Bouchear, A. Herzi, R. Koutchoukali, D. Hamana, S. Chekroud, A.E. Nouicer, Journées internationals de Physique des matériaux et Applications, JIPMA 2009), Gabes, Tunisie, 20-24 Déc. 2009.
    •  M. Bouchear, A. Herzi, R. Koutchoukali, D. Hamana, S. Chekroud, A.E. Nouicer, Journées internationals de Physique des matériaux et Applications, JIPMA 2009), Gabes, Tunisie, 20-24 Déc. 2009 (2 communications).
    • L. Hadjadj, R. Amira, D. Hamana, A. Menand, –The first international Conference on Metallurgy  ICM 2009, Biskra, 4-5 mars 2009.
    • Z. Belkamri, D. Hamana, 1ère conférence sur les mines et la metallurgie CI2M’1, Annaba, 10-12  mais 2010,
    • Z. Belamri, D. Hamana, Rencontre sur les matériaux métalluques, Univer. Biskra, 4 juillet 2001, Biskra, 2011.
    • L. Chetibi, S. Achour, D. Hamana, Rencontre sur les matériaux métalluques, Univer. Biskra, 4 juillet 2001, Biskra, 2011.
    • L. Chetibi, S. Achour, D. Hamana, The 8 th International Conference on materials science and the 5 th International Conference of the Institute of Materials Systems, Beirut on 28-30 May 2012.
    • L. Chetibi, S. Achour, D. Hamana, “Hydroxyapatite electrodepositon on Ti/TiO2-MWCNTs nanocomposites” International Students and Post Graduate Students Conference « Modern Problems of Chemistry », Kiev, 15-17 May, 2013.
    • L. Chetibi, S. Achour, D. Hamana, “Formation of ordered nanoporous anodic Zirconia” International Students and Post Graduate Students Conference « Modern Problems of Chemistry », Kiev, 15-17 May, 2013
    • L. Chetibi, D. Hamana, T.O. Busko, M. P. Kulish, S. Achour, Effect of Ti+ irradiation on the photoluminescence of TiO2 nanofibers, Yildiz Technical University of Istanbul, Turkey, 20-22 December 2014.
    • C. Amrane, D. Hamana, A. Hayoune, comparative study of the precipitation behavior in two Al Mg alloys (12 wt. % Mg and 8 wt. % Mg), Yildiz Technical University of Istanbul, Turkey, 20-22 December 2014.
    • Kabout, T. Boufendi & M. Afrid. Some regimes of the Couette-Taylor flow between two concentric corotating spheres. First International Seminar on Fluid Dynamics and Material Processing. Algiers, June 2-5, 2007.
    • Boufendi and M. Afrid. Etude numérique en 3-D d’une Convection Mixte Avec Propriétés Physiques Variables Conjuguée à Une Conduction Dans Un Conduit Uniformément Chauffé. Septième Séminaire International sur la Physique Énergétique.     Centre Universitaire de Béchar. Algeria. Octobre 2004.
    • Bouarour & M. Afrid. Effet du Transfert Thermique Sur L’Écoulement Entre Deux Cylindres Concentriques. Septième Séminaire International sur la Physique Énergétique centre Universitaire de Béchar. Algeria. Octobre 2004.
    • Chekirou & M. Afrid. Étude Numérique d’Un Écoulement Potentiel Autour d’Un Obstacle A géométrie Complexe Par la Méthode Des Éléments Finis. Sixième Congrès de la Physique et ses Applications. 5-7 Décembre 2004. Tizi-Ouzou. Algeria.
    • Bouaraour & M. Afrid. Effet du Transfert Thermique Sur L’Écoulement Entre Deux Cylindres Concentriques Co-Rotatifs. Sixième Congrès de la Physique et ses Applications. 5-7 Décembre 2004. Tizi-Ouzou. Algeria.
    • Djamil et M. Afrid. Écoulement Entre Deux Disques Contrarotatifs. Sixième Congrès de la Physique et ses Applications. 5-7 Décembre 2004. Tizi-Ouzou. Algeria.
    • Medjroubi & M. Afrid. Régimes d’Écoulement Entre Deux Sphères Concentriques En rotation. Le Cas Rotor-Stator. Sixième Congrès de la Physique et ses Applications. 5-7 Décembre 2004. Tizi-Ouzou. Algeria.
    • Medjroubi & M. Afrid. Flow regimes between two concentric and rotating spheres. Summer School and Workshop: Complex Motion in Fluids. Krugerup Hojskole, Humlebaeb, Denmark. August 2004.
    • Benissaad & M. Afrid. « Simulation numérique de la convection naturelle thermosolutale tridimensionnelle : cas opposant ». Pages : 1-9. 4èmesJournées de la Mécanique, École Militaire Polytechnique, Algeria. le 23-24 Mars 2004.
    • Benissaad & M. Afrid. « Simulation numérique tridimensionnelle de la convection naturelle à double diffusion dans une enceinte rectangulaire : cas coopérant ». 1erCongrès International de Mécanique, Constantine Algérie. Pages : 640-648. Le 14, 15 & 16 Décembre 2002. Département de Mécanique. Faculté des Ingénieurs. Université Mentouri-Constantine.
    • Bounecer & M. Afrid. “Double diffusive natural convection”hydrodynamics -international conference- Hydrodynamics; Hydrodynamics theory and applications 1998. VOL 2, page(s) 1055-1060. UIAM Publishers; 1998.  ISBN 8974722127.
    • Balaska & M. Afrid. “Simultaneous conduction, convection and thermal radiation in a differentially heated enclosure”.hydrodynamics -international conference- Hydrodynamics; Hydrodynamics theory and applications 1998. VOL 2, page(s) 1017-1023. UIAM Publishers; 1998. ISBN 8974722127.
    • Kaabeche & M. Afrid. “On the hemodynamic forces contribution to the formation of a cerebral aneurysm in an artery”hydrodynamics -international conference- Hydrodynamics; Hydrodynamics theory and applications 1998. VOL 2, page(s) 991-998. UIAM Publishers; 1998. ISBN 8974722127
    • Kholai et M. Afrid. « Stability Of Two-Dimensional Low Prandtl Number Convection With Phase Change In A Square Enclosure ». Proceedings of the Second International Conference on Hydrodynamics, edited by A.T. Chwang, J.H.W. Lee & D.Y.C. Leung, pp.1323-1328. Balkema, Roterdam, December 1996.
    • Afrid & A. Zebib. « Three-Dimensional Low Prandtl Number Convection in Rectangular Cavities and Enclosures ». ASME/WAM. FED,  vol. 90, pp. 35-42, 1989.
    • Bentounsi , ‟Collecteur à veine fluide pour la commutation de machines sans fer‟‟ , 2è Séminaire National en Automatique Appliquée et Electricité Industrielle, I.N.H.C. , Boumerdes , 6-7 Mai 1986, pp. 79-85 ;
    • E.H. Latreche et A.Bentounsi , ‟Commande electronique d‟un variateur de vitesse pour machine asynchrone à cage „‟, International Conf. SESCON‟92 , Le Caire, Egypte , 11-13 Avril 1992 , Ref. OSEO-0920-092 ;
    • Bentounsi et M. E.H. Latreche , ‟Résolution des équations du champ par différences finies‟‟ , Conf. On Modelling and Simulation of Electrical Systems, CMSES ‟94 , Skikda , 10-11 Mai 1994 ;
    • E.H. Latreche et A. Bentounsi , ‟Modélisation de structures electromagnétiques par différences finies 2D „‟ , 2è Colloque sur l‟Electrotechnique et l‟Automatique, CEA‟94 , E.N.P. , Alger , 29-30 Nov. 1994, paru dans Algerian Journal Of Technology, vol.2 , Dec.95 , pp.205-205 ;
    • Bentounsi , ‟Diagnostic de défauts de cage de machine asynchrone‟‟, 2è Conférence Maghrébine COMAEI‟96 , Tlemcen , 3-5 Déc. 1996 , Algerian Journal Of Technology (ISSN 1111-357X), vol.4, pp. 206-210 ;
    • E.H. Latreche et A. Bentounsi , „‟ Mailleur 2-D automatique en Eléments Finis sur ordinateur personnel ‟‟, 2è Conférence Maghrébine COMAEI‟96 , Tlemcen , 3-5 Déc. 1996 , A.J.O.T. (ISSN 111 1-357X), vol.3, pp. 42-44 ;
    • Bentounsi et A. Nicolas, ‟On-line diagnosis of defaults on squirrel cage motors using FEM‟, 11th COMPUMAG , Rio de Janeiro , Brésil , 3-6 Nov.97, PB1-10, pp. 129-130 ;
    • Bentounsi et A. Nicolas , „‟ Transient and steady-state analysis of induction motors with cage faults „‟ , 2nd IMACS International Multiconference, CESA‟98, Hammamet , Tunisie , 1-4 Avril 1998 , vol. 1, pp. 429-433 ;
    • Amrane et A. Bentounsi , ‟Diagnostic des défauts rotoriques dans une machine d‟induction‟‟, 2è Séminaire National en Génie Electrique, SNGE‟99 , Biskra , 22-24 Nov. 1999, pp. 228-232 ;
    • Bentounsi et S. Amrane , ‟Influence de l‟effet pelliculaire sur les défauts de cages‟‟ , 1ère Conf. Maghrébine CMGE‟99 , Constantine , 4-6 Déc. 1999, pp. 471-474 ;
    • Bentounsi and A. Nicolas , „‟ A numerical-analytical approach for the optimal diagnosis of faults in induction motors „‟ , ISBN 3-9522075-1-9, 16nd IMACS World Congress 2000, Lausanne, Switzerland, August 21-25, 2000 ;
    • Amrane et A. Bentounsi , „‟ Contrôle actif de défauts de cages de moteurs asynchrones, 1st International Conf. On Electrical Engineering , ICEE2000, 4-6 November 2000, University of Boumerdes;
    • Amrane et A. Bentounsi , „‟ Modèle dynamique et statique orienté vers la surveillance et le diagnostic de défauts de cages de la machine asynchrone „‟, CIP‟2001, 9-11 Juin 2001, CDTA, Alger;
    • Bentounsi and S. Amrane , „‟ Spectral analysis of induction motors with cage faults‟ , 4th International JIEEEC‟2000, 16-18 April 2001, Amman, Jordanie ;
    • Bentounsi and Khemissi Yousfi, “ Detection of Faults in IM coupled with PWM inverter”, STCEX‟2002, Riyadh, 26-30 October 2002, KSA;
    • Lebaroud et A. Bentounsi, „‟ Diagnostic en ligne des moteurs électriques associés à des convertisseurs MLI‟ , 6ème Séminaire Int. Sur la Physique Energétique, SIPE‟6, 21-23 Octobre 2002, Béchar ;
    • Lebaroud, A. Bentounsi, M. Mordjaoui et O. Boudebbouz,‟ Diagnostic en ligne des défauts dans les Moteurs Asynchrones Associés à des Sources Non Idéales‟ , CGE‟02, 17-18 Décembre 2002, EMP, Alger.
    • Lebaroud and A. Bentounsi, „‟ NDT of faulty induction motors with PWM inverter „‟, 11th International Symposium on Applied Electromagnetics and Mechanics, ISEM‟2003, May 12-14, 2003, Versailles, France.
    • Khemissi Yousfi and Bentounsi, “ Application of Sliding Mode Control to Variable Structure Position Control”, STCEX‟2004, Riyadh, KSA.
    • Lebaroud, A. Bentounsi and G. Rostaing, „‟ On-line diagnosis of an induction motor under different supply conditions „‟, 6th Int. Symposium on Electric and Magnetic Fields, EMF‟2003, October 6-9, 2003, Aachen, Allemagne.
    • Lebaroud and A. Bentounsi, „‟ Monitoring of Induction Motor Faults Under Distorted Suppl Conditions‟, Int. Conf. Sciences of Electronic Techno. and Communications, SETIT ‟2004, March 15-20, 2004, Tunisia.
    • Lebaroud, A. Bentounsi and M. Feliachi , „‟ For an accurate diagnosis of induction motor faults under distorted supply voltage „‟ , World Automatic Congress WAC‟2004, June 28 – July 1st , 2004, Seville, Spain.
    • Lebaroud and A. Bentounsi, „‟ Effects of broken bar induction motor with stator asymmetry and distorted supply „‟ , XVI International Conference on Electrical Machines ICEM‟2004, September 5-8, 2004, Cracow, Poland.
    • Lebaroud, G. Clerc and A. Bentounsi , „‟ Detailed Study of the Rotor Asymmetry Effects of Induction Machine Under Different Supply Conditions „‟ , 11th European Conf. of Power Electronic & Applications EPE’2005, 13-15 Sept. 2005, Dresden, Germany.
    • Belakehal, H. Benalla et A. Bentounsi,  » MPPT using neural networks for solar pumpin system « , SSD‟07, March 19-22, 2007- Hammamet, Tunisie, ISBN 978-9973-959-06-5.
    • Yassa, B. Batoun, R. Khanniche, A. Bentounsi et H. Benalla ,  » Study of wind resources in Algeria based upon satellite data « , EVER’2008, March 27-30, 2008, Monaco.
    • Belakehal, H. Benalla et A. Bentounsi,  » Performance investigation of a solar pumping system using neural networks MPPT approach « , ICEEA’08, 20-21 Mai 2008, Univ. D. Liabes, Sidi-Bel-Abbes;
    • Djeghloud, H. Benalla et A. Bentounsi,  » Filtrage actif des systèmes de puissance: Révision de l’Etat de l’Art « , ICEEA’08, 20-21 Mai 2008, Univ. D. Liabes, Sidi-Bel-Abbes.
    • Bentounsi et al.,  » Simulation d’une MRVDS sous environnement Matlab/Simulink « , ICEEA’08, 20-21 Mai 2008, Univ. D. Liabes, Sidi-Bel-Abbes.
    • Djeghloud, H. Benalla et A. Bentounsi,  » Supply current and load voltage distortions suppression using power quality conditioner « , IEEE SSD’08, July 20-22, 2008, Amman, Jordan. http://ieeexplore.ieee.org/xpl/articleDetails.jsp?arnumber=4632874
    • Bentounsi et al.,  » Design and modeling of a doubly salient variable reluctance machine « , ICEM’2008, 6-9 September 2008, Vilamoura, Portugal. http://ieeexplore.ieee.org/xpl/articleDetails.jsp?arnumber=4800193
    • Boulahia, K. Nabti, A. Bentounsi and H. Benalla,  » Contrôle direct de puissance avec modulation vectorielle des redresseurs MLI « , 5th International CEE’2008, 27-29 October 2008, Batna;
    • Djeghloud, H. Benalla et A. Bentounsi, « Application of SVPWM to Three-Level Voltage and Current Inverters », UPEC‟2009, 1-4 September 2009, Glasgow, Scotland. http://ieeexplore.ieee.org/xpl/mostRecentIssue.jsp?punumber=5426314
    • Bentounsi et al.,  » Effects of the geometric parameters on performance of a SRM by numerical-analytical approach”, ISEF‟2009, XIV Int. Symposium on Electromagnetic Fields, Arras, France, September 10-12, 2009;
    • Batoun, N. Heraud and A. Bentounsi, « Robust control of wind generator with flexible transmission », EOW, 14-16 September 2009, Stokholm, Sweden.
    • Bentounsi et al., « Optimized geometrical parameters of a SRM by numerical -analytical approach”, Compumag‟2009, November 22-26, 2009, Florianopolis, Santa Catarina, Brazil.
    • Batoun, A. Bentounsi, and N. Héraud,,  » Power Robust Optimisation Control of a Wind Turbine Generator”, ICEE‟2009, 5-7 December 2009, Boumerdes, Algeria.
    • Ferkous, A. Bentounsi, H. Djeghloud et B. Batoun,  » Modélisation et simulation d‟une chaîne de conversion d‟énergie éolienne à l‟aide du logiciel MATLAB/SIMULINK « , SMEE‟201 0, 11-12 Avril 2010, Alger.
    • Bentounsi and H. Djeghloud, « Hand-on Experiments and Computer-aided Simulations for Sustaining the IM Course », XIX International Conference on Electrical Machines ICEM‟2010, September 6-8, 2010, Rome, Italy.
    • Djeghloud, A. Bentounsi and H. Benalla, « Simulation of a DFIG-Based Wind Turbine with Active Filtering function using Matlab/Simulink », XIX International Conference on Electrical Machines ICEM‟2010, September 6-8, 2010, Rome, Italy. http://ieeexplore.ieee.org/xpl/articleDetails.jsp?arnumber=5607885
    • Bouchareb, A. Bentounsi, A. Lebaroud, and B. Batoun, « On Line Diagnosis of Faults on Switched Reluctance Motor Using Coupled Circuit-FEM « , International Symposium on Environment Friendly Energies in Electrical Applications, EFEEA‟2010, 2-4 November 2010, Ghardaia, Algeria.
    • Batoun, N. Héraud, A. Bentounsi, and R. Khanniche, « Application of Wavelet Transform For Wind Energy Generator Diagnostic”, SIENR‟2010, 10-12 October 2010, Ghardaia, Algeria.
    • Bouchareb, B. Batoun, A. Bentounsi and A. Lebaroud, “Study on Fault Tolerant Power Converter for Switched Reluctance Drive Using Coupled Circuit-FEM”, Sixth International Conference and Exhibition on Ecological Vehicles and Renewable Energies EVER‟10, March 31- April 3, 2011, Monte-Carlo (Monaco).
    • Bouchareb, A. Bentounsi, A. Lebaroud, M. Bouchahdane, F. Rebbahi and B. Batoun, “Modeling and Detection of Eccentricity Fault in Switched Reluctance Motor”, 10th International Conference on Environment and Electrical Engineering, EEEIC 2011, 8-11Mai 2011, Rome. http://ieeexplore.ieee.org/xpl/articleDetails.jsp?arnumber=5874721
    • Bouchareb, A. Bentounsi, and A. Lebaroud, “A Comparative Study of Synchronous Reluctance and Switched Reluctance Motors for High-Performance Fault-Tolerant Applications”, 15th International Symposium on Applied Electromagnetics and Mechanics ISEM 2011, 7-9 September 2011, Napoli.
    • Bouchareb, A. Bentounsi, and A. Lebaroud, “Dynamic Eccentricity Fault Detection in Switched Reluctance Motor Using Time-Frequency Analysis”, 6th International Conference SETIT‟2012, 21-24/03/2012, Sousse, Tunisia.
    • Bouchareb, A. Bentounsi, A. Lebaroud, and B. Batoun, “Three-Dimension Time-Frequency Approach for Diagnosing Eccentricity Faults in SRM”, 6th International Conference SETIT‟2012, 21-24/03/2012, Sousse, Tunisia. http://ieeexplore.ieee.org/xpl/articleDetails.jsp?arnumber=6482007
    • Djeghloud, A. Bentounsi, and M. Larakeb, “Real and Virtual Labs for Enhancing a SM course”, 15th ICEMS‟2012, October 21-24, 2012, Sapporo, Japan.
    • Djeghloud, M. Larakeb, and A. Bentounsi, “Virtual Labs of Conventional Electric Machines”, 7th IMCL‟2012, 6-8 November 2012, Amman, Jordan, pp.52-57.http://ieeexplore.ieee.org/xpl/articleDetails.jsp?arnumber=6396450
    • Bouchareb, Bentounsi, A. Lebaroud, “An Integrated Artificial Neural Networks/Optimal Time-Frequency Based Classification in Condition Monitoring of Synchronous Reluctance Motor Stator Fault”, 9th IEEE International Symposium on Diagnostics for Electrical Machines, Power Electronics & Drives, SDEMPED, 2013. http://scholar.google.com/citations?user=pwpjGZEAAAAJ&hl=fr
    • Bouchareb, A. Bentounsi, and A. Lebaroud, “Fault Detection and Diagnosis in a Set “Inverter-Switched Reluctance Motor” Based on Pattern Recognition Using Kalman Filter Prediction ”, 15th International Symposium on Applied Electromagnetics and Mechanics ISEM 2013, July 30-August 02 2013, Quebec, Canada.
    • Benamimour, A. Bentounsi, H. Dj eghloud, and I. Bouchareb, “Finite Element Modeling and Dynamic Simulation of Nonlinear VRM using MATLAB”, ICMSAO‟2013, Hammamet, Tunisie. http://ieeexplore.ieee.org/xpl/abstractKeywords.jsp?arnumber=6552653
    • Benamimour, A. Bentounsi, and H. Djeghloud, “CAD of Electrical Machines Using Coupled FEMM-MATLAB Software”, EPECS‟13, 2-4 October 2013, Istanbul, Turkey. http://ieeexplore.ieee.org/xpl/abstractAuthors.jsp?reload=true&arnumber=6712995
    • Mouellef, A. Bentounsi, and H. Benalla, “A New Analytical Model of VRM Coupled to GA for an Optimal Design”, WCCIT, 22-24 June 2013, Sousse, Tunisia.http://ieeexplore.ieee.org/xpls/abs all .j sp?arnumber=661 8747
    • Lebsir, A. Bentounsi, R. Rebbah, S. Belakehal and M.E.H. Benbouzid, “Comparative Study of PMSM and SRM Capabilities”, Int. Conf. POWERENG, 13-17 May 2013, Istanbul, Turkey, pp. 760-763. http://ieeexplore.ieee.org/xpl/articleDetails.jsp?arnumber=6635705
    • Lebsir, A. Bentounsi, R. Rebbah and S. Belakehal, “Compared applications of permanent magnet and switched reluctance machine: State of the Art”, Fourth International Conference on Power Engineering, Energy and Electrical Drives (POWERENG), 13-17 May 2013, Istanbul, Turkey, pp. 439-443. http://ieeexplore.ieee.org/xpl/articleDetails.jsp?arnumber=6635647
    • Djeghloud, O. Guellout, M. Larakeb , O. Bouteldja, S. Boukebbous and A. Bentounsi, “Practical Study of a Laboratory Undersized Grid-Connected PV System”, Int. Conf. on Smart Grids and Technologies, ISGT2014, Kuala Lumpur, Malaysia, 20-23 May 2014.http://ieeexplore.ieee.org/xpls/abs all .j sp?arnumber=6873863
    • Rebahi, A. Bentounsi, A. Lebsir and T. Benamimour, “Soft magnetic materials for SRM: finite element analysis and perspective”, Conf. Int. en Sciences et Technologie au Maghreb, CISTEM2014, 3-6 Nov. 2014, Tunis. http://ieeexplore.ieee.org/xpl/articleDetails.jsp?arnumber=7076953
    • Bouchareb, A. Bentounsi, A. Lebaroud and F. Rebahi, “Automatic Fault diagnosis of Fault Tolerant Power Converter for Switched Reluctance Motor based on Time-Frequency Technique”, 16th Int. Power Electronics and Motion Control Conf. And Exposition, PEMC2014, Sept. 21-24, 2014, Antalya, Turkey. http://ieeexplore.ieee.org/xpl/articleDetails.jsp?arnumber=6980680
    • Bouchareb, Bentounsi, A. Lebaroud, “Classification Method for Faults Diagnosis in Reluctance Motors Using Hidden Markov Models”, ISI E201 4, 1-4 June 2014, Istanbul, Turkey, pp. 984-995.
    • Lebaroud and A. Bentounsi, „‟ Monitoring of Induction Motor Faults Under Distorted Supply Conditions‟, Int. Conf. Sciences of Electronic Techno. and Communications, SETIT ‟2004, March 15-20, 2004, Tunisia.
    • Lebaroud, A. Bentounsi and M. Feliachi , „‟ For an accurate diagnosis of induction motor faults under distorted supply voltage „‟ , World Automatic Congress WAC‟2004, June 28 – July 1st , 2004, Seville, Spain.
    • Lebaroud and A. Bentounsi, „‟ Effects of broken bar induction motor with stator asymmetry and distorted supply „‟ , XVI International Conference on Electrical Machines ICEM‟2004, September 5-8, 2004, Cracow, Poland.
    • Lebaroud, G. Clerc and A. Bentounsi , „‟ Detailed Study of the Rotor Asymmetry Effects of Induction Machine Under Different Supply Conditions „‟ , 11th European Conf. of Power Electronic & Applications EPE’2005, 13-15 Sept. 2005, Dresden, Germany.
    • Belakehal, H. Benalla et A. Bentounsi,  » MPPT using neural networks for solar pumping system « , SSD‟07, March 19-22, 2007- Hammamet, Tunisie, ISBN 978-9973-959-06-5.
    • Yassa, B. Batoun, R. Khanniche, A. Bentounsi et H. Benalla ,  » Study of wind resources in Algeria based upon satellite data « , EVER’2008, March 27-30, 2008, Monaco.
    • Belakehal, H. Benalla et A. Bentounsi,  » Performance investigation of a solar pumping system using neural networks MPPT approach « , ICEEA’08, 20-21 Mai 2008, Univ. D. Liabes, Sidi-Bel-Abbes;
    • Djeghloud, H. Benalla et A. Bentounsi,  » Filtrage actif des systèmes de puissance: Révision de l’Etat de l’Art « , ICEEA’08, 20-21 Mai 2008, Univ. D. Liabes, Sidi-Bel-Abbes.
    • Bentounsi et al.,  » Simulation d’une MRVDS sous environnement Matlab/Simulink « , ICEEA’08, 20-21 Mai 2008, Univ. D. Liabes, Sidi-Bel-Abbes.
    • Djeghloud, H. Benalla et A. Bentounsi,  » Supply current and load voltage distortions suppression using power quality conditioner « , IEEE SSD’08, July 20-22, 2008, Amman, Jordan. http://ieeexplore.ieee.org/xpl/articleDetails.jsp?arnumber=4632874
    • Bentounsi et al.,  » Design and modeling of a doubly salient variable reluctance machine « , ICEM’2008, 6-9 September 2008, Vilamoura, Portugal.http://ieeexplore.ieee.org/xpl/articleDetails.jsp?arnumber=4800193
    • Boulahia, K. Nabti, A. Bentounsi and H. Benalla,  » Contrôle direct de puissance avec modulation vectorielle des redresseurs MLI « , 5th International CEE’2008, 27-29 October 2008, Batna;
    • Djeghloud, H. Benalla et A. Bentounsi, « Application of SVPWM to Three-Level Voltage and Current Inverters », UPEC‟2009, 1-4 September 2009, Glasgow, Scotland. http://ieeexplore.ieee.org/xpl/mostRecentIssue.jsp?punumber=5426314
    • Bentounsi et al.,  » Effects of the geometric parameters on performance of a SRM by numerical-analytical approach”, ISEF‟2009, XIV Int. Symposium on Electromagnetic Fields, Arras, France, September 10-12, 2009;
    • Batoun, N. Heraud and A. Bentounsi, « Robust control of wind generator with flexible transmission », EOW, 14-16 September 2009, Stokholm, Sweden.
    • Bentounsi et al., « Optimized geometrical parameters of a SRM by numerical -analytical approach”, Compumag‟2009, November 22-26, 2009, Florianopolis, Santa Catarina, Brazil.
    • Batoun, A. Bentounsi, and N. Héraud,,  » Power Robust Optimisation Control of a Wind Turbine Generator”, ICEE‟2009, 5-7 December 2009, Boumerdes, Algeria.
    • Ferkous, A. Bentounsi, H. Djeghloud et B. Batoun,  » Modélisation et simulation d‟une chaîne de conversion d‟énergie éolienne à l‟aide du logiciel MATLAB/SIMULINK « , SMEE‟201 0, 11-12 Avril 2010, Alger.
    • Bentounsi and H. Djeghloud, « Hand-on Experiments and Computer-aided Simulations for Sustaining the IM Course », XIX International Conference on Electrical Machines ICEM‟2010, September 6-8, 2010, Rome, Italy.
    • Djeghloud, A. Bentounsi and H. Benalla, « Simulation of a DFIG-Based Wind Turbine with Active Filtering function using Matlab/Simulink », XIX International Conference on Electrical Machines ICEM‟2010, September 6-8, 2010, Rome, Italy.http://ieeexplore.ieee.org/xpl/articleDetails.jsp?arnumber=5607885
    • Bouchareb, A. Bentounsi, A. Lebaroud, and B. Batoun, « On Line Diagnosis of Faults on Switched Reluctance Motor Using Coupled Circuit-FEM « , International Symposium on Environment Friendly Energies in Electrical Applications, EFEEA‟2010, 2-4 November 2010, Ghardaia, Algeria.
    • Batoun, N. Héraud, A. Bentounsi, and R. Khanniche, « Application of Wavelet Transform For Wind Energy Generator Diagnostic”, SIENR‟2010, 10-12 October 2010, Ghardaia, Algeria.
    • Bouchareb, B. Batoun, A. Bentounsi and A. Lebaroud, “Study on Fault Tolerant Power Converter for Switched Reluctance Drive Using Coupled Circuit-FEM”, Sixth International Conference and Exhibition on Ecological Vehicles and Renewable Energies EVER‟10, March 31- April 3, 2011, Monte-Carlo (Monaco).
    • Bouchareb, A. Bentounsi, A. Lebaroud, M. Bouchahdane, F. Rebbahi and B. Batoun, “Modeling and Detection of Eccentricity Fault in Switched Reluctance Motor”, 10th International Conference on Environment and Electrical Engineering, EEEIC 2011, 8-11Mai 2011, Rome. http://ieeexplore.ieee.org/xpl/articleDetails.jsp?arnumber=5874721
    • Bouchareb, A. Bentounsi, and A. Lebaroud, “A Comparative Study of Synchronous Reluctance and Switched Reluctance Motors for High-Performance Fault-Tolerant Applications”, 15th International Symposium on Applied Electromagnetics and Mechanics ISEM 2011, 7-9 September 2011, Napoli.
    • Bouchareb, A. Bentounsi, and A. Lebaroud, “Dynamic Eccentricity Fault Detection in Switched Reluctance Motor Using Time-Frequency Analysis”, 6th International Conference SETIT‟2012, 21-24/03/2012, Sousse, Tunisia.
    • Bouchareb, A. Bentounsi, A. Lebaroud, and B. Batoun, “Three-Dimension Time-Frequency Approach for Diagnosing Eccentricity Faults in SRM”, 6th International Conference SETIT‟2012, 21-24/03/2012, Sousse, Tunisia. http://ieeexplore.ieee.org/xpl/articleDetails.jsp?arnumber=6482007
    • Djeghloud, A. Bentounsi, and M. Larakeb, “Real and Virtual Labs for Enhancing a SM course”, 15th ICEMS‟2012, October 21-24, 2012, Sapporo, Japan.
    • Djeghloud, M. Larakeb, and A. Bentounsi, “Virtual Labs of Conventional Electric Machines”, 7th IMCL‟2012, 6-8 November 2012, Amman, Jordan, pp.52-57. http://ieeexplore.ieee.org/xpl/articleDetails.jsp?arnumber=6396450
    • . Bouchareb, Bentounsi, A. Lebaroud, “An Integrated Artificial Neural Networks/Optimal Time-Frequency Based Classification in Condition Monitoring of Synchronous Reluctance Motor Stator Fault”, 9th IEEE International Symposium on Diagnostics for Electrical Machines, Power Electronics & Drives, SDEMPED, 2013. http://scholar.google.com/citations?user=pwpjGZEAAAAJ&hl=fr
    • Bouchareb, A. Bentounsi, and A. Lebaroud, “Fault Detection and Diagnosis in a Set “Inverter-Switched Reluctance Motor” Based on Pattern Recognition Using Kalman Filter Prediction ”, 15th International Symposium on Applied Electromagnetics and Mechanics ISEM 2013, July 30-August 02 2013, Quebec, Canada.
    • Benamimour, A. Bentounsi, H. Dj eghloud, and I. Bouchareb, “Finite Element Modeling and Dynamic Simulation of Nonlinear VRM using MATLAB”, ICMSAO‟2013, Hammamet, Tunisie. http://ieeexplore.ieee.org/xpl/abstractKeywords.jsp?arnumber=6552653
    • Benamimour, A. Bentounsi, and H. Djeghloud, “CAD of Electrical Machines Using Coupled FEMM-MATLAB Software”, EPECS‟13, 2-4 October 2013, Istanbul, Turkey. http://ieeexplore.ieee.org/xpl/abstractAuthors.jsp?reload=true&arnumber=6712995
    • Mouellef, A. Bentounsi, and H. Benalla, “A New Analytical Model of VRM Coupled to GA for an Optimal Design”, WCCIT, 22-24 June 2013, Sousse, Tunisia.http://ieeexplore.ieee.org/xpls/abs all .j sp?arnumber=661 8747
    • Lebsir, A. Bentounsi, R. Rebbah, S. Belakehal and M.E.H. Benbouzid, “Comparative Study of PMSM and SRM Capabilities”, Int. Conf. POWERENG, 13-17 May 2013, Istanbul, Turkey, pp. 760-763. http://ieeexplore.ieee.org/xpl/articleDetails.jsp?arnumber=6635705
    • Lebsir, A. Bentounsi, R. Rebbah and S. Belakehal, “Compared applications of permanent magnet and switched reluctance machine: State of the Art”, Fourth International Conference on Power Engineering, Energy and Electrical Drives (POWERENG), 13-17 May 2013, Istanbul, Turkey, pp. 439-443. http://ieeexplore.ieee.org/xpl/articleDetails.jsp?arnumber=6635647
    • Djeghloud, O. Guellout, M. Larakeb , O. Bouteldja, S. Boukebbous and A. Bentounsi, “Practical Study of a Laboratory Undersized Grid-Connected PV System”, Int. Conf. on Smart Grids and Technologies, ISGT2014, Kuala Lumpur, Malaysia, 20-23 May 2014.http://ieeexplore.ieee.org/xpls/abs all .j sp?arnumber=6873863
    • Djeghloud, Y. Terriche, D. Kerdoun, M. Larakeb and A. Bentounsi, “Laboratory Implementation of a Hybrid Series Active Power Filter System Part I: Designing of Passive Components”, 16th Int. Power Electronics and Motion Control Conf. And Exposition, PEMC2014, Sept. 21-24, 2014, Antalya, Turkey. http://www.pemc2014.org/files/PEMC_program_booklet_16_09.pdf
    • Djeghloud, M. Larakeb, Y. Terriche, A. Bentounsi, and D. Kerdoun, “Laboratory Implementation of a Hybrid Series Active Power Filter System Part II: Series Active Filter Designing”, 16th Int. Power Electronics and Motion Control Conf. And Exposition, PEMC2014, Sept. 21-24, 2014, Antalya, Turkey. http://www.pemc2014.org/files/PEMC_program_booklet_16_09.pdf http://www.pemc2014.org/files/PEMC_program_booklet_16_09.pdf
    • Lebsir, R. Rebbah, M. Larakeb, H. Djeghloud and A. Bentounsi,” Modeling and Analysis of a Salient Poles Synchronous Machines using Finite-Elements Method”, SPEEDAM‟2014, June 18-20, 2014, Ischia, Italie. http://ieeexplore.ieee.org/xpl/articleDetails.jsp?arnumber=6871907
    • Rebahi, A. Bentounsi, H. Bouchekara and I. Bouchareb, “Optimum Geometry to Improve Torque of a Doubly Salient Variable Reluctance Machine”, 16th I nt. Power Electronics and Motion Control Conf. And Exposition, PEMC201 4, Sept. 21-24, 2014, Antalya, Turkey, pp.1241-1246. http://ieeexplore.ieee.org/xpl/articleDetails.jsp?arnumber=6980681
    • RA. Bentounsi, A. Lebsir and T. Benamimour, “Soft magnetic materials for SRM: finit element analysis and perspective”, Conf. Int. en Sciences et Technologie au Maghreb, CISTEM2014, 3-6 Nov. 2014, Tunis. http://ieeexplore.ieee.org/xpl/articleDetails.jsp?arnumber=7076953
    • Bouchareb, Bentounsi, A. Lebaroud and F. Rebahi, “Automatic Fault diagnosis of Fault Tolerant Power Converter for Switched Reluctance Motor based on Time-Frequency Technique”, 16th Int. Power Electronics and Motion Control Conf. And Exposition, PEMC2014, Sept. 21-24, 2014, Antalya, Turkey. http://ieeexplore.ieee.org/xpl/articleDetails.jsp?arnumber=6980680
    • Bouchareb, Bentounsi, A. Lebaroud, “Classification Method for Faults Diagnosis in Reluctance Motors Using Hidden Markohttp://ieeexplore.ieee.org/xpl/articleDetails.jsp?arnumber=6864746
    • 65) I. Bouchareb, Bentounsi, A. Lebaroud “Optimum Feature Extraction and Selection for Automatic Fault Diagnosis of Reluctance Motors”, 40th Annual Conference of IEEE Industrial Electronics Society, IECON14, Dallas, TX – USA, 11/2014. http://iecon2014.org/index.php/component/content/category/2-uncategorisedv Models”, ISI E201 4, 1-4 June 2014, Istanbul, Turkey, pp. 984-995.
    • Effect of soil mechanical properties on RC wall system responses 5Th Annual International Conference on Civil Engineering, Structural Engineering and Mechanics, 25-28 may 2015, Athens, Greece.
    • KHALFALLAH S. (2014)Tension stiffening approach in concrete of tensioned members. 4th Annual International Conference on Civil Engineering, Structural Engineering and Mechanics, 26-29 may 2014, Athens, Greece. http://www.atiner.gr/civileng.htm.
    • KHALFALLAH S. (2012) Tension stiffening model for nonlinear analysi of reinforced concrete members. International Symposium on Composites and Aircraft Materials, 9-12 mai 2012, Fès, Maroc. http://acma2012.esta.ac.ma/
    • KHALFALLAH S. (2010) Problématique du moment effectif d’inertie des FRP-poutres en béton. Rencontre Universitaire de Génie Civil, France, pp. 1378-1387. www.augc.asso.fr/
    • KHALFALLAH S. (2010) Deflection Calculation based on modification of Gao equation of FRP reinforced concrete beams. International Symposium on Composites and Aircraft Materials, 12-14 mai 2010, Marrakech,Maroc HTTP://WWW.ENIT.FR/ACMA2010/INSTRUCTIONS-FR.HTML
    • KHALFALLAH S. (2009 Explaining the Riddle of effective moment of inertia models for FRP concrete beams.The first International Conference on Sustainable Built Environment InfrastructuresDeveloping Country, ENSET Oran, 12-14 October 2009, pp. 57-64. http://www.enset-oran.dz/spip.php?page=album&id_article=202
    • MERABET W., KHALFALLAH S. (2008)Cracking behavior of reinforced concrete beams using finite element method. European Conference FEMS, 14-18 July 2008, Lausanne, Switzerland,
    1. 175-184. www.dgm.de/past/2008/junior-euromat/images/JE_Programm_2008.pdf
    • OUCHENANE M., KHALFALLAH S. (2008) Simulation de l’adhérence acier-béton et voir ‘’l’effet de la longueur d’ancrage, le diamètre des barres d’acier et la résistance à la traction du béton” dans les tests d’arrachement. 6th International Conference of Material Sciences (ICMC_6), 15-18 Juillet 2008, Liban. www.ul.edu.lb/csm/files/3.pdf
    • KHALFALLAH S., MERABET W. (2008) Tension Stiffening Model of RC beams based on fracture energy concept. 6th International Conference of Material Sciences (ICMC_6), 15-18 JUILLET 2008, LIBAN. www.ul.edu.lb/csm/files/3.pdf
    • OUCHENANE M., KHALFALLAH S. (2007) Numerical simulation of bond, steel-concrete, Application: Pull-out tests. Conférence Internationale sur la métallurgie & et l’environnement CIME_07, 23-25 avril 2007, Université de Annaba, Algérie. http://www.andru.gov.dz/conf-inter.htm
    • KHALFALLAH S., CHARIF A. (2005) Contribution à l’analyse non linéaire des structures en béton armé. Symposium International sur la Construction, 22-24 Nov. 2005, Université de Chlef, Algérie.
    • KHALFALLAH S., CHARIF A. (2001) Modélisation 2D par éléments finis du comportement élastoplastique des structures en béton armé. Séminaire International sur la Modélisation Numérique en Structures et Géomatériaux, 2001, U. Batna, Algérie, pp.1 24-133.
    • KHALFALLAH S. (2014) Nonlinear modeling of RC structure behavior integrating sol structure interaction. Journées scientifiques, 13-14 mai 2014, Université de Jijel.
    • Guerdouh D., KHALFALLAH S. (2014) Comportement dynamique non linéaire des portiques. Journées scientifiques, 13-14 mai 2014, Université de Jijel.
    • Bourouaiah W., KHALFALLAH S. (2014) Effet de l’interaction sol structure sur la réponse des voiles : Etude statique linéaire et non linéaire. Journées scientifiques, 13-14 mai 2014, Université de Jijel.
    • KHALFALLAH S., BOUZID M., REDJEL B. (2009) Prédiction de la réponse inélastique des murs en béton armé. Journées de Mécanique des Structures JMS09, Laboratoire de mécanique des sols et des structures, Université de Constantine, 2009, 28 Janvier 2009.
    • KHALFALLAH S. (2008)Tension stiffening model of FRP reinforced concrete beams. Séminaire National de Génie Civil SNGC08, Université Hassiba Benbouali, Chlef, 15-16 décembre 2008.
    • OUCHENANE M., KHALFALLAH S., OUCHENANE K. (2008) Simulation de l’adhérence acier-béton effet du comportement du béton dans les tests d’arrachement. Colloque National, Pathologie des Constructions- du Diagnostic à la Réparation, 25-26 Novembre 2008, Université de Constantine. http:/ieeexplore.ieee.org/xpl/articleDetails.jsp?arnumber=6864746
    • Lebaroud Abdesselam, » Détection automatique de défaut de rupture partielle de barres rotoriques de la machine asynchrone », 2ème conférence internationale de énergies renouvelables », 18-21 Décembre 2014, Monastir, Tunisie. http://ipco-co.com/CIER’14.html
    • Medoued, A. ; Lebaroud, A. ; Belmeguenai, A. ; Boudebbouz, O. ;Sayad, D., » Monitoring of the asynchronous machi faults using the signal approach »,
      Sciences and Techniques of Automatic Control and Computer Engineering (STA), 2014 1 5th International Conference on , pp. 360 – 364, 2014.
    • Bouchareb, A. Bentounsi, and Lebaroud Abdesselam, « Optimum Feature Extraction and Selection for Automatic Fault Diagnosis of Reluctance Motors », IECON, Sheraton Dallas Hotel in Dallas, 29-1 Novembre, USA 2014.
    • A .Medoued, A.Lebaroud, O.Boudebbouz and D.Sayad, “A Spectral Domain Computational Technique Dedicated to Fault Detection in Induction Machine “;International Congress in Honour of Professor Ravi P. Agarwal, June 23– 26, 2014 Uludag University, Bursa–Turkey. http://agarwal2014.uludag.edu.tr/
    • Boukra Tahar, Lebaroud Abdesselam  » Identifying New Prognostic Features For Remaining Useful Life Prediction”, 16th international power electronics and motion control conference and exposition (PEMC 2014), 21- 24 September 2014, Antalya, Turkey.
    • Bouchareb, A. Bentounsi, and Lebaroud Abdesselam, “Automatic Fault Diagnosis Of Fault Tolerant Power Converter For Switched Reluctance Motor Based On Time-Frequency Technique”, 1 6th international power electronics and motion control conference and exposition (PEMC 2014), Antalya, 2 1-24 September 2014, Turkey.
    • Bouchareb, A. Bentounsi, and Lebaroud Abdesselam, “”Classification Method for Faults Diagnosis in Reluctance Motors Using Hidden Marko Models”, 23rd IEEE International Symposium on Industrial Electronics, (IEEE-ISIE), 1-4 June 2014, Istanbul, TURKEY
    • Medoued, Lebaroud Abdesselam, M. Mordjaoui, D.Sayad, “ Induction motor fault diagnosis based on the radial vibration analytic signal”, International Conference on control, engineering and information technology (CEIT’ 14) 22-25 March 2014, Tunisia
    • Medoued Ammar, Lebaroud Abdesselam, Sayad Djamel, Mourad Mordjaoui « Application of the Spectrum Phase Technique for Simulation and Monitoring of Induction Machine Faults”, 2ème EMM-FM: Euro-Mediterranean Meeting on Functionalized Materials, March 28-30, 2013, Hammamet, Tunisia, 2013. http://emm-fm2013.com/wp-content/uploads/Poster-presentations.pdf
    • Bouguerne Abla, Lebaroud Abdesselam, BOUKADOUM Aziz, »Optimisation of vibration data using particle swarm optimisation applied to induction machine faults » Conférence Internationale des Energies Renouvelables (CIER’ 13)
    • 15-1 7 Déce Bouguerne Abla, Lebaroud Abdesselam, BOUKADOUM Aziz, » New Metho of Data Treatment Related to Induction Machine Bearing Fault Using Axial Vibration Analytic Signal”, EVER’ 13, International conference and exhibition on ecologic vehicles and renewable energies, 27-30 March, Monaco, 2013. http://ieeexplore.ieee.org/Xplore/guesthome.jsp
    • Medoued, Lebaroud Abdesselam, A.Laifa, D.Sayad, »Feature Form Extraction and Optimization of Induction Machine Faults Using PSO Technique », 3rd International Conference on Electric Power and Energy Conversion Systems Yildiz Technical University, Istanbul, TURKEY, October 2-4, 2013.
    • Bouchareb, A. Bentounsi, and Lebaroud Abdesselam, “Fault Detection and Diagnosis in a Set “Inverter­Switched Reluctance Motor” Based on Pattern Recognition Using Kalman Filter Prediction”, 15th International Symposium on Applied Electromagnetics and Mechanics, ISEM 2013, Quebec, Canada. www.isem2013.gel.ulaval.ca
    • Bouguerne Abla, Lebaroud Abdesselam, Boukadoum Aziz, » Backpropagation algorithm for diagnosis of Induction Machine Faults », fourth international renewable energy congress, (IREC 2012), Souss, Tunisia, 2012. http://www.irec.cmerp.net/
    • Bouguerne Abla, Lebaroud Abdesselam, Boukadoum Aziz, » A New diagnosis Method of Induction Machine Faults Using Fuzzy K-Nearest Neighbor », 13th International conference on sciences and techniques of automatic control and computer, (STA’2012), Monastir, Tunisia, 2012. http://www.sta-tn.com/
    • Bouguerne Abla, Lebaroud Abdesselam, Boukadoum Aziz “Time-Frequency Representation and Neural Networks for Classification of Induction Machine Faults”, EVER’ 12, International conference and exhibition on ecologic vehicles and renewable energies, 22-25 March, Monaco, 2012. http://conference.evermonaco.com/files/ever12 final program.pdf
    • Soualhi Abdenour, Clerc Guy, Hubert Razik, Lebaroud Abdesselam,” Fault Detection and Diagnosis of Induction Motors Based on Hidden Markov Model, International conference in electrical machines (ICEM’ 12), Marseille, France, 2012. http://ieeexplore.ieee.org/Xplore/guesthome.jsp
    • Medoued Amar, Lebaroud Abdesselam, “ Application of Hilbert transforms to fault detection in electric machines”, International conference on applied analysis and algebra, Istanbul, Turkey 20-24 June, 2012. http://www.ica12.yildiz.edu.tr/About.aspx
    • Bouchareb Ilhem, Bentounsi Amar, Lebaroud Abdesselam, Batoun Bachir Three dimension Time-Frequency approach for diagnosing eccentricity faults in Switched Reluctance motor”, 06th International Conference: Science of electronics, technologies of information and telecommunications “SETIT 2012”, Souss 21-24 March 2012, http://ieeexplore.ieee.org/Xplore/guesthome.jsp
    • Bouguerne Abla, Lebaroud Abdesselam, and Ammar Medoued “Classification of Induction Machine Faults by K­nearest Neighbor”, 7th International Conference on Electrical and Electronics Engineering, (ELECO), 1-4. December, Bursa, TURKEY, 2011. http://ieeexplore.ieee.org/Xplore/guesthome.jsp
    • Boukra Tahar and Lebaroud Adesselam”Neural-Network Approaches for Classification of Induction Machine Faults Using Optimal Time-Frequency Representations”, 7th International Conference on Electrical and Electronics Engineering, (ELECO), 1-4 December, Bursa, TURKEY, 2011.http://ieeexplore.ieee.org/Xplore/guesthome.jsp
    • Bouchareb Ilhem, Bentounsi Amar, Lebaroud Abdesselam, Nouicer Abdelmadjid “A Comparative Study of Synchronous Reluctance and Switched Reluctance Motors for High-Performance Fault-Tolerant Applications”, 15th International Symposium on Applied Electromagnetics and Mechanics ISEM 2011, 6-9 September 2011, Napoli, Italy. http://isem2011.unina.it/ISEM2011 final program.pdf
    • Ilhem Bouchareb, Bachir Batoun, Amar Bentounsi and Abdesselam Lebaroud, «Study on Fault Tolerant Power Converter for Switched Reluctance Drive Using Coupled Circuit-FEM», Sixth International Conference and Exhibition on Ecological Vehicles and Renewable Energies EVER’ 10, March 31- April 3, 2011, Monte-Carlo (Monaco).
    • Medoued Amar, Lebaroud Abdesselam, Boukadoum Ahcen, Boukra Tahar, Clerc Guy “Back Propagation Neural Network for Classification of Induction Machine Faults ”, 8th SDEMPED, IEEE Symposium on Diagnostics for Electrical Machines, Power Electronics & Drives September 5-8, Bologna, Italy, 2011. http://ieeexplore.ieee.org/Xplore/guesthome.jsp
    • Lebaroud Abdesselam Clerc Guy and Medoued Ammar “Analysis of Inter-Turn Short Circuit in Slots by Finite Element Model”, EEEIC 2011, International Conference on Environment and Electrical Engineering, 8-11 mai, Rome, 2011.http://ieeexplore.ieee.org/Xplore/guesthome.jsp
    • Boukra Tahar, Lebaroud Abdesselam, and Clerc Guy, “Neural-Network Approaches for Classification of InductionMachine Faults Using Optimal Time-Frequency” EEEIC 2011, International Conference on Environment and Electrical Engineering Rome 8-11 mai 2011. http://ieeexplore.ieee.org/Xplore/guesthome.jsp mbre 2013 – Sousse, Tunisie.
    • Bouguerne Abla, Lebaroud Abdesselam, BOUKADOUM Aziz, » New Method of Data Treatment Related to Induction Machine Bearing Fault Using Axial Vibration Analytic Signal”, EVER’ 13, International conference and exhibition on ecologic vehicles and renewable energies, 27-30 March, Monaco, 2013. http://ieeexplore.ieee.org/Xplore/guesthome.jsp
    • Medoued, Lebaroud Abdesselam, A.Laifa, D.Sayad, »Feature Form Extraction and Optimization of Induction Machine Faults Using PSO Technique », 3rd International Conference on Electric Power and Energy Conversion Systems Yildiz Technical University, Istanbul, TURKEY, October 2-4, 2013.
    • Bouchareb, A. Bentounsi, and Lebaroud Abdesselam, “Fault Detection and Diagnosis in a Set “Inverter­Switched Reluctance Motor” Based on Pattern Recognition Using Kalman Filter Prediction”, 15th International Symposium on Applied Electromagnetics and Mechanics, ISEM 2013, Quebec, Canada. www.isem2013.gel.ulaval.ca
    • Bouguerne Abla, Lebaroud Abdesselam, Boukadoum Aziz, » Backpropagation algorithm for diagnosis of Induction Machine Faults », fourth international renewable energy congress, (IREC 2012), Souss, Tunisia, 2012. http://www.irec.cmerp.net/
    • Bouguerne Abla, Lebaroud Abdesselam, Boukadoum Aziz, » A New diagnosis Method of Induction Machine Faults Using Fuzzy K-Nearest Neighbor », 13th International conference on sciences and techniques of automatic control and computer, (STA’2012), Monastir, Tunisia, 2012. http://www.sta-tn.com/
    • Bouguerne Abla, Lebaroud Abdesselam, Boukadoum Aziz “Time-Frequency Representation and Neural Networks for Classification of Induction Machine Faults”, EVER’ 12, International conference and exhibition on ecologic vehicles and renewable energies, 22-25 March, Monaco, 2012.http://conference.evermonaco.com/files/ever12 final program.pdf
    • Soualhi Abdenour, Clerc Guy, Hubert Razik, Lebaroud Abdesselam,” Fault Detection and Diagnosis of Induction Motors Based on Hidden Markov Model, International conference in electrical machines (ICEM’ 12), Marseille, France, 2012.http://ieeexplore.ieee.org/Xplore/guesthome.jsp
    • Medoued Amar, Lebaroud Abdesselam, “ Application of Hilbert transforms to fault detection in electric machines”, International conference on applied analysis and algebra, Istanbul, Turkey 20-24 June, 2012. http://www.ica12.yildiz.edu.tr/About.aspx
    • Bouchareb Ilhem, Bentounsi Amar, Lebaroud Abdesselam, Batoun Bachir Three dimension Time-Frequency approach for diagnosing eccentricity faults in Switched Reluctance motor”, 06th International Conference: Science of electronics, technologies of information and telecommunications “SETIT 2012”, Souss 21-24 March 2012,http://ieeexplore.ieee.org/Xplore/guesthome.jsp
    • Bouguerne Abla, Lebaroud Abdesselam, and Ammar Medoued “Classification of Induction Machine Faults by K­nearest Neighbor”, 7th International Conference on Electrical and Electronics Engineering, (ELECO), 1-4. December, Bursa, TURKEY, 2011. http://ieeexplore.ieee.org/Xplore/guesthome.jsp
    • Boukra Tahar and Lebaroud Adesselam”Neural-Network Approaches for Classification of Induction Machine Faults Using Optimal Time-Frequency Representations”, 7th International Conference on Electrical and Electronics Engineering, (ELECO), 1-4 December, Bursa, TURKEY, 2011.http://ieeexplore.ieee.org/Xplore/guesthome.jsp
    • Bouchareb Ilhem, Bentounsi Amar, Lebaroud Abdesselam, Nouicer Abdelmadjid “A Comparative Study of Synchronous Reluctance and Switched Reluctance Motors for High-Performance Fault-Tolerant Applications”, 15th International Symposium on Applied Electromagnetics and Mechanics ISEM 2011, 6-9 September 2011, Napoli, Italy. http://isem2011.unina.it/ISEM2011 final program.pdf
    • Ilhem Bouchareb, Bachir Batoun, Amar Bentounsi and Abdesselam Lebaroud, «Study on Fault Tolerant Power Converter for Switched Reluctance Drive Using Coupled Circuit-FEM», Sixth International Conference and Exhibition on Ecological Vehicles and Renewable Energies EVER’ 10, March 31- April 3, 2011, Monte-Carlo (Monaco).
    • Medoued Amar, Lebaroud Abdesselam, Boukadoum Ahcen, Boukra Tahar, Clerc Guy “Back Propagation Neural Network for Classification of Induction Machine Faults ”, 8th SDEMPED, IEEE Symposium on Diagnostics for Electrical Machines, Power Electronics & Drives September 5-8, Bologna, Italy, 2011. http://ieeexplore.ieee.org/Xplore/guesthome.jsp
    • Lebaroud Abdesselam Clerc Guy and Medoued Ammar “Analysis of Inter-Turn Short Circuit in Slots by Finite Element Model”, EEEIC 2011, International Conference on Environment and Electrical Engineering, 8-11 mai, Rome, 2011.http://ieeexplore.ieee.org/Xplore/guesthome.jsp
    • Boukra Tahar, Lebaroud Abdesselam, and Clerc Guy, “Neural-Network Approaches for Classification of InductionMachine Faults Using Optimal Time-Frequency” EEEIC 2011, International Conference on Environment and Electrical E Bouguerne Abla, Lebaroud Abdesselam, BOUKADOUM Aziz, » New Method of Data Treatment Related to Induction Machine Bearing Fault Using Axial Vibration Analytic Signal”, EVER’ 13, International conference and exhibition on ecologic vehicles and renewable energies, 27-30 March, Monaco, 2013. http://ieeexplore.ieee.org/Xplore/guesthome.jsp
    • Medoued, Lebaroud Abdesselam, A.Laifa, D.Sayad, »Feature Form Extraction and Optimization of Induction Machine Faults Using PSO Technique », 3rd International Conference on Electric Power and Energy Conversion Systems Yildiz Technical University, Istanbul, TURKEY, October 2-4, 2013.
    • Bouchareb, A. Bentounsi, and Lebaroud Abdesselam, “Fault Detection and Diagnosis in a Set “Inverter­Switched Reluctance Motor” Based on Pattern Recognition Using Kalman Filter Prediction”, 15th International Symposium on Applied Electromagnetics and Mechanics, ISEM 2013, Quebec, Canada. www.isem2013.gel.ulaval.ca
    • Bouguerne Abla, Lebaroud Abdesselam, Boukadoum Aziz, » Backpropagation algorithm for diagnosis of Induction Machine Faults », fourth international renewable energy congress, (IREC 2012), Souss, Tunisia, 2012. http://www.irec.cmerp.net/
    • Bouguerne Abla, Lebaroud Abdesselam, Boukadoum Aziz, » A New diagnosis Method of Induction Machine Faults Using Fuzzy K-Nearest Neighbor », 13th International conference on sciences and techniques of automatic control and computer, (STA’2012), Monastir, Tunisia, 2012. http://www.sta-tn.com/
    • Bouguerne Abla, Lebaroud Abdesselam, Boukadoum Aziz “Time-Frequency Representation and Neural Networks for Classification of Induction Machine Faults”, EVER’ 12, International conference and exhibition on ecologic vehicles and renewable energies, 22-25 March, Monaco, 2012.http://conference.evermonaco.com/files/ever12 final program.pdf
    • Soualhi Abdenour, Clerc Guy, Hubert Razik, Lebaroud Abdesselam,” Fault Detection and Diagnosis of Induction Motors Based on Hidden Markov Model, International conference in electrical machines (ICEM’ 12), Marseille, France, 2012.http://ieeexplore.ieee.org/Xplore/guesthome.jsp
    • Medoued Amar, Lebaroud Abdesselam, “ Application of Hilbert transforms to fault detection in electric machines”, International conference on applied analysis and algebra, Istanbul, Turkey 20-24 June, 2012. http://www.ica12.yildiz.edu.tr/About.aspx
    • Bouchareb Ilhem, Bentounsi Amar, Lebaroud Abdesselam, Batoun Bachir Three dimension Time-Frequency approach for diagnosing eccentricity faults in Switched Reluctance motor”, 06th International Conference: Science of electronics, technologies of information and telecommunications “SETIT 2012”, Souss 21-24 March 2012,http://ieeexplore.ieee.org/Xplore/guesthome.jsp
    • Bouguerne Abla, Lebaroud Abdesselam, and Ammar Medoued “Classification of Induction Machine Faults by K­nearest Neighbor”, 7th International Conference on Electrical and Electronics Engineering, (ELECO), 1-4. December, Bursa, TURKEY, 2011. http://ieeexplore.ieee.org/Xplore/guesthome.jsp
    • Boukra Tahar and Lebaroud Adesselam”Neural-Network Approaches for Classification of Induction Machine Faults Using Optimal Time-Frequency Representations”, 7th International Conference on Electrical and Electronics Engineering, (ELECO), 1-4 December, Bursa, TURKEY, 2011.http://ieeexplore.ieee.org/Xplore/guesthome.jsp
    • Bouchareb Ilhem, Bentounsi Amar, Lebaroud Abdesselam, Nouicer Abdelmadjid “A Comparative Study of Synchronous Reluctance and Switched Reluctance Motors for High-Performance Fault-Tolerant Applications”, 15th International Symposium on Applied Electromagnetics and Mechanics ISEM 2011, 6-9 September 2011, Napoli, Italy. http://isem2011.unina.it/ISEM2011 final program.pdf
    • Ilhem Bouchareb, Bachir Batoun, Amar Bentounsi and Abdesselam Lebaroud, «Study on Fault Tolerant Power Converter for Switched Reluctance Drive Using Coupled Circuit-FEM», Sixth International Conference and Exhibition on Ecological Vehicles and Renewable Energies EVER’ 10, March 31- April 3, 2011, Monte-Carlo (Monaco).
    • Medoued Amar, Lebaroud Abdesselam, Boukadoum Ahcen, Boukra Tahar, Clerc Guy “Back Propagation Neural Network for Classification of Induction Machine Faults ”, 8th SDEMPED, IEEE Symposium on Diagnostics for Electrical Machines, Power Electronics & Drives September 5-8, Bologna, Italy, 2011. http://ieeexplore.ieee.org/Xplore/guesthome.jsp
    • Lebaroud Abdesselam Clerc Guy and Medoued Ammar “Analysis of Inter-Turn Short Circuit in Slots by Finite Element Model”, EEEIC 2011, International Conference on Environment and Electrical Engineering, 8-11 mai, Rome, 2011.http://ieeexplore.ieee.org/Xplore/guesthome.jsp
    • Boukra Tahar, Lebaroud Abdesselam, and Clerc Guy, “Neural-Network Approaches for Classification of InductionMachine Faults Using Optimal Time-Frequency” EEEIC 2011, International Conference on Environment and Electrical Engineering Rome 8-11 mai 2011. http://ieeexplore.ieee.org/Xplore/guesthome.jsp
    • ngineering Rome 8-11 mai 2 Bouguerne Abla, Lebaroud Abdesselam, BOUKADOUM Aziz, » New Method of Data Treatment Related to Induction Machine Bearing Fault Using Axial Vibration Analytic Signal”, EVER’ 13, International conference and exhibition on ecologic vehicles and renewable energies, 27-30 March, Monaco, 2013. http://ieeexplore.ieee.org/Xplore/guesthome.jsp
    • Medoued, Lebaroud Abdesselam, A.Laifa, D.Sayad, »Feature Form Extraction and Optimization of Induction Machine Faults Using PSO Technique », 3rd International Conference on Electric Power and Energy Conversion Systems Yildiz Technical University, Istanbul, TURKEY, October 2-4, 2013.
    • Bouchareb, A. Bentounsi, and Lebaroud Abdesselam, “Fault Detection and Diagnosis in a Set “Inverter­Switched Reluctance Motor” Based on Pattern Recognition Using Kalman Filter Prediction”, 15th International Symposium on Applied Electromagnetics and Mechanics, ISEM 2013, Quebec, Canada. www.isem2013.gel.ulaval.ca
    • Bouguerne Abla, Lebaroud Abdesselam, Boukadoum Aziz, » Backpropagation algorithm for diagnosis of Induction Machine Faults », fourth international renewable energy congress, (IREC 2012), Souss, Tunisia, 2012. http://www.irec.cmerp.net/
    • Bouguerne Abla, Lebaroud Abdesselam, Boukadoum Aziz, » A New diagnosis Method of Induction Machine Faults Using Fuzzy K-Nearest Neighbor », 13th International conference on sciences and techniques of automatic control and computer, (STA’2012), Monastir, Tunisia, 2012. http://www.sta-tn.com/
    • Bouguerne Abla, Lebaroud Abdesselam, Boukadoum Aziz “Time-Frequency Representation and Neural Networks for Classification of Induction Machine Faults”, EVER’ 12, International conference and exhibition on ecologic vehicles and renewable energies, 22-25 March, Monaco, 2012.http://conference.evermonaco.com/files/ever12 final program.pdf
    • Soualhi Abdenour, Clerc Guy, Hubert Razik, Lebaroud Abdesselam,” Fault Detection and Diagnosis of Induction Motors Based on Hidden Markov Model, International conference in electrical machines (ICEM’ 12), Marseille, France, 2012.http://ieeexplore.ieee.org/Xplore/guesthome.jsp
    • Medoued Amar, Lebaroud Abdesselam, “ Application of Hilbert transforms to fault detection in electric machines”, International conference on applied analysis and algebra, Istanbul, Turkey 20-24 June, 2012. http://www.ica12.yildiz.edu.tr/About.aspx
    • Bouchareb Ilhem, Bentounsi Amar, Lebaroud Abdesselam, Batoun Bachir Three dimension Time-Frequency approach for diagnosing eccentricity faults in Switched Reluctance motor”, 06th International Conference: Science of electronics, technologies of information and telecommunications “SETIT 2012”, Souss 21-24 March 2012,http://ieeexplore.ieee.org/Xplore/guesthome.jsp
    • Bouguerne Abla, Lebaroud Abdesselam, and Ammar Medoued “Classification of Induction Machine Faults by K­nearest Neighbor”, 7th International Conference on Electrical and Electronics Engineering, (ELECO), 1-4. December, Bursa, TURKEY, 2011. http://ieeexplore.ieee.org/Xplore/guesthome.jsp
    • Boukra Tahar and Lebaroud Adesselam”Neural-Network Approaches for Classification of Induction Machine Faults Using Optimal Time-Frequency Representations”, 7th International Conference on Electrical and Electronics Engineering, (ELECO), 1-4 December, Bursa, TURKEY, 2011.http://ieeexplore.ieee.org/Xplore/guesthome.jsp
    • Bouchareb Ilhem, Bentounsi Amar, Lebaroud Abdesselam, Nouicer Abdelmadjid “A Comparative Study of Synchronous Reluctance and Switched Reluctance Motors for High-Performance Fault-Tolerant Applications”, 15th International Symposium on Applied Electromagnetics and Mechanics ISEM 2011, 6-9 September 2011, Napoli, Italy. http://isem2011.unina.it/ISEM2011 final program.pdf
    • Ilhem Bouchareb, Bachir Batoun, Amar Bentounsi and Abdesselam Lebaroud, «Study on Fault Tolerant Power Converter for Switched Reluctance Drive Using Coupled Circuit-FEM», Sixth International Conference and Exhibition on Ecological Vehicles and Renewable Energies EVER’ 10, March 31- April 3, 2011, Monte-Carlo (Monaco).
    • Medoued Amar, Lebaroud Abdesselam, Boukadoum Ahcen, Boukra Tahar, Clerc Guy “Back Propagation Neural Network for Classification of Induction Machine Faults ”, 8th SDEMPED, IEEE Symposium on Diagnostics for Electrical Machines, Power Electronics & Drives September 5-8, Bologna, Italy, 2011. http://ieeexplore.ieee.org/Xplore/guesthome.jsp
    • Lebaroud Abdesselam Clerc Guy and Medoued Ammar “Analysis of Inter-Turn Short Circuit in Slots by Finite Element Model”, EEEIC 2011, International Conference on Environment and Electrical Engineering, 8-11 mai, Rome, 2011.http://ieeexplore.ieee.org/Xplore/guesthome.jsp
    • Boukra Tahar, Lebaroud Abdesselam, and Clerc Guy, “Neural-Network Approaches for Classification of InductionMachine Faults Using Optimal Time-Frequency” EEEIC 2011, International Conference on Environment and Electrical Engineering Rome 8-11 mai 2011. http://ieeexplore.ieee.org/Xplore/guesthome.jsp
    • http://ieeex Bouguerne Abla, Lebaroud Abdesselam, BOUKADOUM Aziz, » New Method of Data Treatment Related to Induction Machine Bearing Fault Using Axial Vibration Analytic Signal”, EVER’ 13, International conference and exhibition on ecologic vehicles and renewable energies, 27-30 March, Monaco, 2013. http://ieeexplore.ieee.org/Xplore/guesthome.jsp
    • Medoued, Lebaroud Abdesselam, A.Laifa, D.Sayad, »Feature Form Extraction and Optimization of Induction Machine Faults Using PSO Technique », 3rd International Conference on Electric Power and Energy Conversion Systems Yildiz Technical University, Istanbul, TURKEY, October 2-4, 2013.
    • Bouchareb, A. Bentounsi, and Lebaroud Abdesselam, “Fault Detection and Diagnosis in a Set “Inverter­Switched Reluctance Motor” Based on Pattern Recognition Using Kalman Filter Prediction”, 15th International Symposium on Applied Electromagnetics and Mechanics, ISEM 2013, Quebec, Canada. www.isem2013.gel.ulaval.ca
    • Bouguerne Abla, Lebaroud Abdesselam, Boukadoum Aziz, » Backpropagation algorithm for diagnosis of Induction Machine Faults », fourth international renewable energy congress, (IREC 2012), Souss, Tunisia, 2012. http://www.irec.cmerp.net/
    • Bouguerne Abla, Lebaroud Abdesselam, Boukadoum Aziz, » A New diagnosis Method of Induction Machine Faults Using Fuzzy K-Nearest Neighbor », 13th International conference on sciences and techniques of automatic control and computer, (STA’2012), Monastir, Tunisia, 2012. http://www.sta-tn.com/
    • Bouguerne Abla, Lebaroud Abdesselam, Boukadoum Aziz “Time-Frequency Representation and Neural Networks for Classification of Induction Machine Faults”, EVER’ 12, International conference and exhibition on ecologic vehicles and renewable energies, 22-25 March, Monaco, 2012.http://conference.evermonaco.com/files/ever12 final program.pdf
    • Soualhi Abdenour, Clerc Guy, Hubert Razik, Lebaroud Abdesselam,” Fault Detection and Diagnosis of Induction Motors Based on Hidden Markov Model, International conference in electrical machines (ICEM’ 12), Marseille, France, 2012.http://ieeexplore.ieee.org/Xplore/guesthome.jsp
    • Medoued Amar, Lebaroud Abdesselam, “ Application of Hilbert transforms to fault detection in electric machines”, International conference on applied analysis and algebra, Istanbul, Turkey 20-24 June, 2012. http://www.ica12.yildiz.edu.tr/About.aspx
    • Bouchareb Ilhem, Bentounsi Amar, Lebaroud Abdesselam, Batoun Bachir Three dimension Time-Frequency approach for diagnosing eccentricity faults in Switched Reluctance motor”, 06th International Conference: Science of electronics, technologies of information and telecommunications “SETIT 2012”, Souss 21-24 March 2012,http://ieeexplore.ieee.org/Xplore/guesthome.jsp
    • Bouguerne Abla, Lebaroud Abdesselam, and Ammar Medoued “Classification of Induction Machine Faults by K­nearest Neighbor”, 7th International Conference on Electrical and Electronics Engineering, (ELECO), 1-4. December, Bursa, TURKEY, 2011. http://ieeexplore.ieee.org/Xplore/guesthome.jsp
    • Boukra Tahar and Lebaroud Adesselam”Neural-Network Approaches for Classification of Induction Machine Faults Using Optimal Time-Frequency Representations”, 7th International Conference on Electrical and Electronics Engineering, (ELECO), 1-4 December, Bursa, TURKEY, 2011.http://ieeexplore.ieee.org/Xplore/guesthome.jsp
    • Bouchareb Ilhem, Bentounsi Amar, Lebaroud Abdesselam, Nouicer Abdelmadjid “A Comparative Study of Synchronous Reluctance and Switched Reluctance Motors for High-Performance Fault-Tolerant Applications”, 15th International Symposium on Applied Electromagnetics and Mechanics ISEM 2011, 6-9 September 2011, Napoli, Italy. http://isem2011.unina.it/ISEM2011 final program.pdf
    • Ilhem Bouchareb, Bachir Batoun, Amar Bentounsi and Abdesselam Lebaroud, «Study on Fault Tolerant Power Converter for Switched Reluctance Drive Using Coupled Circuit-FEM», Sixth International Conference and Exhibition on Ecological Vehicles and Renewable Energies EVER’ 10, March 31- April 3, 2011, Monte-Carlo (Monaco).
    • Medoued Amar, Lebaroud Abdesselam, Boukadoum Ahcen, Boukra Tahar, Clerc Guy “Back Propagation Neural Network for Classification of Induction Machine Faults ”, 8th SDEMPED, IEEE Symposium on Diagnostics for Electrical Machines, Power Electronics & Drives September 5-8, Bologna, Italy, 2011. http://ieeexplore.ieee.org/Xplore/guesthome.jsp
    • Lebaroud Abdesselam Clerc Guy and Medoued Ammar “Analysis of Inter-Turn Short Circuit in Slots by Finite Element Model”, EEEIC 2011, International Conference on Environment and Electrical Engineering, 8-11 mai, Rome, 2011. http://ieeexplore.ieee.org/Xplore/guesthome.jsp
    • Boukra Tahar, Lebaroud Abdesselam, and Clerc Guy, “Neural-Network Approaches for Classification of InductionMachine Faults Using Optimal Time-Frequency” EEEIC 2011, International Conference on Environment and Electrical Engineering Rome 8-11 mai 2011. http://ieeexplore.ieee.org/Xplore/guesthome.jsp
    • plo Bouguerne Abla, Lebaroud Abdesselam, BOUKADOUM Aziz, » New Method of Data Treatment Related to Induction Machine Bearing Fault Using Axial Vibration Analytic Signal”, EVER’ 13, International conference and exhibition on ecologic vehicles and renewable energies, 27-30 March, Monaco, 2013. http://ieeexplore.ieee.org/Xplore/guesthome.jsp
    • Medoued, Lebaroud Abdesselam, A.Laifa, D.Sayad, »Feature Form Extraction and Optimization of Induction Machine Faults Using PSO Technique », 3rd International Conference on Electric Power and Energy Conversion Systems Yildiz Technical University, Istanbul, TURKEY, October 2-4, 2013.
    • Bouchareb, A. Bentounsi, and Lebaroud Abdesselam, “Fault Detection and Diagnosis in a Set “Inverter­Switched Reluctance Motor” Based on Pattern Recognition Using Kalman Filter Prediction”, 15th International Symposium on Applied Electromagnetics and Mechanics, ISEM 2013, Quebec, Canada. www.isem2013.gel.ulaval.ca
    • Bouguerne Abla, Lebaroud Abdesselam, Boukadoum Aziz, » Backpropagation algorithm for diagnosis of Induction Machine Faults », fourth international renewable energy congress, (IREC 2012), Souss, Tunisia, 2012. http://www.irec.cmerp.net/
    • Bouguerne Abla, Lebaroud Abdesselam, Boukadoum Aziz, » A New diagnosis Method of Induction Machine Faults Using Fuzzy K-Nearest Neighbor », 13th International conference on sciences and techniques of automatic control and computer, (STA’2012), Monastir, Tunisia, 2012. http://www.sta-tn.com/
    • Bouguerne Abla, Lebaroud Abdesselam, Boukadoum Aziz “Time-Frequency Representation and Neural Networks for Classification of Induction Machine Faults”, EVER’ 12, International conference and exhibition on ecologic vehicles and renewable energies, 22-25 March, Monaco, 2012.http://conference.evermonaco.com/files/ever12 final program.pdf
    • Soualhi Abdenour, Clerc Guy, Hubert Razik, Lebaroud Abdesselam,” Fault Detection and Diagnosis of Induction Motors Based on Hidden Markov Model, International conference in electrical machines (ICEM’ 12), Marseille, France, 2012.http://ieeexplore.ieee.org/Xplore/guesthome.jsp
    • Medoued Amar, Lebaroud Abdesselam, “ Application of Hilbert transforms to fault detection in electric machines”, International conference on applied analysis and algebra, Istanbul, Turkey 20-24 June, 2012. http://www.ica12.yildiz.edu.tr/About.aspx
    • Bouchareb Ilhem, Bentounsi Amar, Lebaroud Abdesselam, Batoun Bachir Three dimension Time-Frequency approach for diagnosing eccentricity faults in Switched Reluctance motor”, 06th International Conference: Science of electronics, technologies of information and telecommunications “SETIT 2012”, Souss 21-24 March 2012,http://ieeexplore.ieee.org/Xplore/guesthome.jsp
    • Bouguerne Abla, Lebaroud Abdesselam, and Ammar Medoued “Classification of Induction Machine Faults by K­nearest Neighbor”, 7th International Conference on Electrical and Electronics Engineering, (ELECO), 1-4. December, Bursa, TURKEY, 2011. http://ieeexplore.ieee.org/Xplore/guesthome.jsp
    • Boukra Tahar and Lebaroud Adesselam”Neural-Network Approaches for Classification of Induction Machine Faults Using Optimal Time-Frequency Representations”, 7th International Conference on Electrical and Electronics Engineering, (ELECO), 1-4 December, Bursa, TURKEY, 2011.http://ieeexplore.ieee.org/Xplore/guesthome.jsp
    • Bouchareb Ilhem, Bentounsi Amar, Lebaroud Abdesselam, Nouicer Abdelmadjid “A Comparative Study of Synchronous Reluctance and Switched Reluctance Motors for High-Performance Fault-Tolerant Applications”, 15th International Symposium on Applied Electromagnetics and Mechanics ISEM 2011, 6-9 September 2011, Napoli, Italy. http://isem2011.unina.it/ISEM2011 final program.pdf
    • Ilhem Bouchareb, Bachir Batoun, Amar Bentounsi and Abdesselam Lebaroud, «Study on Fault Tolerant Power Converter for Switched Reluctance Drive Using Coupled Circuit-FEM», Sixth International Conference and Exhibition on Ecological Vehicles and Renewable Energies EVER’ 10, March 31- April 3, 2011, Monte-Carlo (Monaco).
    • Medoued Amar, Lebaroud Abdesselam, Boukadoum Ahcen, Boukra Tahar, Clerc Guy “Back Propagation Neural Network for Classification of Induction Machine Faults ”, 8th SDEMPED, IEEE Symposium on Diagnostics for Electrical Machines, Power Electronics & Drives September 5-8, Bologna, Italy, 2011. http://ieeexplore.ieee.org/Xplore/guesthome.jsp
    • Lebaroud Abdesselam Clerc Guy and Medoued Ammar “Analysis of Inter-Turn Short Circuit in Slots by Finite Element Model”, EEEIC 2011, International Conference on Environment and Electrical Engineering, 8-11 mai, Rome, 2011.http://ieeexplore.ieee.org/Xplore/guesthome.jsp
    • Boukra Tahar, Lebaroud Abdesselam, and Clerc Guy, “Neural-Network Approaches for Classification of InductionMachine Faults Using Optimal Time-Frequency” EEEIC 2011, International Conference on Environment and Electrical Engineering Rome 8-11 mai 2011. http://ieeexplore.ieee.org/Xplore/guesthome.jsp
    • r Bouguerne Abla, Lebaroud Abdesselam, BOUKADOUM Aziz, » New Method of Data Treatment Related to Induction Machine Bearing Fault Using Axial Vibration Analytic Signal”, EVER’ 13, International conference and exhibition on ecologic vehicles and renewable energies, 27-30 March, Monaco, 2013. http://ieeexplore.ieee.org/Xplore/guesthome.jsp
    • Medoued, Lebaroud Abdesselam, A.Laifa, D.Sayad, »Feature Form Extraction and Optimization of Induction Machine Faults Using PSO Technique », 3rd International Conference on Electric Power and Energy Conversion Systems Yildiz Technical University, Istanbul, TURKEY, October 2-4, 2013.
    • Bouchareb, A. Bentounsi, and Lebaroud Abdesselam, “Fault Detection and Diagnosis in a Set “Inverter­Switched Reluctance Motor” Based on Pattern Recognition Using Kalman Filter Prediction”, 15th International Symposium on Applied Electromagnetics and Mechanics, ISEM 2013, Quebec, Canada. www.isem2013.gel.ulaval.ca
    • Bouguerne Abla, Lebaroud Abdesselam, Boukadoum Aziz, » Backpropagation algorithm for diagnosis of Induction Machine Faults », fourth international renewable energy congress, (IREC 2012), Souss, Tunisia, 2012. http://www.irec.cmerp.net/
    • Bouguerne Abla, Lebaroud Abdesselam, Boukadoum Aziz, » A New diagnosis Method of Induction Machine Faults Using Fuzzy K-Nearest Neighbor », 13th International conference on sciences and techniques of automatic control and computer, (STA’2012), Monastir, Tunisia, 2012. http://www.sta-tn.com/
    • Bouguerne Abla, Lebaroud Abdesselam, Boukadoum Aziz “Time-Frequency Representation and Neural Networks for Classification of Induction Machine Faults”, EVER’ 12, International conference and exhibition on ecologic vehicles and renewable energies, 22-25 March, Monaco, 2012.http://conference.evermonaco.com/files/ever12 final program.pdf
    • Soualhi Abdenour, Clerc Guy, Hubert Razik, Lebaroud Abdesselam,” Fault Detection and Diagnosis of Induction Motors Based on Hidden Markov Model, International conference in electrical machines (ICEM’ 12), Marseille, France, 2012.http://ieeexplore.ieee.org/Xplore/guesthome.jsp
    • Medoued Amar, Lebaroud Abdesselam, “ Application of Hilbert transforms to fault detection in electric machines”, International conference on applied analysis and algebra, Istanbul, Turkey 20-24 June, 2012. http://www.ica12.yildiz.edu.tr/About.aspx
    • Bouchareb Ilhem, Bentounsi Amar, Lebaroud Abdesselam, Batoun Bachir Three dimension Time-Frequency approach for diagnosing eccentricity faults in Switched Reluctance motor”, 06th International Conference: Science of electronics, technologies of information and telecommunications “SETIT 2012”, Souss 21-24 March 2012,http://ieeexplore.ieee.org/Xplore/guesthome.jsp
    • Bouguerne Abla, Lebaroud Abdesselam, and Ammar Medoued “Classification of Induction Machine Faults by K­nearest Neighbor”, 7th International Conference on Electrical and Electronics Engineering, (ELECO), 1-4. December, Bursa, TURKEY, 2011. http://ieeexplore.ieee.org/Xplore/guesthome.jsp
    • Boukra Tahar and Lebaroud Adesselam”Neural-Network Approaches for Classification of Induction Machine Faults Using Optimal Time-Frequency Representations”, 7th International Conference on Electrical and Electronics Engineering, (ELECO), 1-4 December, Bursa, TURKEY, 2011.http://ieeexplore.ieee.org/Xplore/guesthome.jsp
    • Bouchareb Ilhem, Bentounsi Amar, Lebaroud Abdesselam, Nouicer Abdelmadjid “A Comparative Study of Synchronous Reluctance and Switched Reluctance Motors for High-Performance Fault-Tolerant Applications”, 15th International Symposium on Applied Electromagnetics and Mechanics ISEM 2011, 6-9 September 2011, Napoli, Italy. http://isem2011.unina.it/ISEM2011 final program.pdf
    • Ilhem Bouchareb, Bachir Batoun, Amar Bentounsi and Abdesselam Lebaroud, «Study on Fault Tolerant Power Converter for Switched Reluctance Drive Using Coupled Circuit-FEM», Sixth International Conference and Exhibition on Ecological Vehicles and Renewable Energies EVER’ 10, March 31- April 3, 2011, Monte-Carlo (Monaco).
    • Medoued Amar, Lebaroud Abdesselam, Boukadoum Ahcen, Boukra Tahar, Clerc Guy “Back Propagation Neural Network for Classification of Induction Machine Faults ”, 8th SDEMPED, IEEE Symposium on Diagnostics for Electrical Machines, Power Electronics & Drives September 5-8, Bologna, Italy, 2011. http://ieeexplore.ieee.org/Xplore/guesthome.jsp
    • Lebaroud Abdesselam Clerc Guy and Medoued Ammar “Analysis of Inter-Turn Short Circuit in Slots by Finite Element Model”, EEEIC 2011, International Conference on Environment and Electrical Engineering, 8-11 mai, Rome, 2011.http://ieeexplore.ieee.org/Xplore/guesthome.jsp
    • Boukra Tahar, Lebaroud Abdesselam, and Clerc Guy, “Neural-Network Approaches for Classification of InductionMachine Faults Using Optimal Time-Frequency” EEEIC 2011, International Conference on Environment and Electrical Engineering Rome 8-11 mai 2011. http://ieeexplore.ieee.org/Xplore/guesthome.jsp
    • Bouchareb Ilhem, Bentounsi Amar, Lebaroud Abdesselam, Bouchahdane Mouhamed, Rebbahi Fares, Batoun Bachir Modeling and Detection of Eccentricity Fault in Switched Reluctance Motor”, 2011, 10th International Conference on Environment and Electrical Engineering (EEEIC) 8-11 mai, Rome, 2011. http://ieeexplore.ieee.org/Xplore/guesthome.jsp
    • Lebaroud Abdesselam, Clerc Guy, “Analysis of stator short-circuit faults for induction machine using finite element modeling”, 7th IEEE international multiconference on systems, signals and devices (SSD10), Amman, Jordan, 2010.http://ieeexplore.ieee.org/Xplore/guesthome.jsp
    • Boukra Taher, Lebaroud Abdesselam, “Classification of induction machine faults”, 7th IEEE international multiconference on systems, signals and devices (SSD10), Amman, Jordan, Juin 2010. http://ieeexplore.ieee.org/Xplore/guesthome.jsp
    • Medoued Ammar, Lebaroud Abdesselam, Boukadoum Ahcen, » Monitoring techniques of Induction Motors Faults « , 3th International conference on nonlinear sciences and complexity (NSC10), Ankara, Turkey, 28-31 July 2010. http://nsc10.cankaya.edu.tr/PosterSession.pdf
    • Lebaroud Abdesselam, Clerc Guy, “ Study of rotor asymmetry by finite element model of the induction machine”, 6th International Conference on Electrical and Electronics Engineering, (ELECO), proceeding, pp. 401-404, Bursa, TURKEY, 2009.http://ieeexplore.ieee.org/Xplore/guesthome.jsp
    • Medoued Ammar, Lebaroud Abdesselam, Boukadoum Ahcen, “On-line monitoring and diagnosis of broken rotor bar in induction motor”, 6th International Conference on Electrical and Electronics Engineering, (ELECO), proceeding, pp. 405-409, , Bursa, Turkey, 2009. http://ieeexplore.ieee.org/Xplore/guesthome.jsp
    • Lebaroud Abdesselam, Clerc Guy “Diagnosis of Induction Motor Faults Using Instantaneous Frequency Signature Analysis, International conference in electrical machines (ICEM’08), Vilamoura (Algarve), Portugal, September 2008.http://ieeexplore.ieee.org/Xplore/guesthome.jsp
    • Lebaroud Abdesselam, Clerc Guy,” Monitoring and diagnostic of induction motors stator faults” AMSE Modeling, Simulation & Control, Port Said / Egypt, 2008.
    • Lebaroud Abdesselam, Clerc Guy ” Diagnosis of induction machine by time frequency representation and hidden Markov modelling”, Proc. IEEE SDEMPED 2007 – Symposium on Diagnostics for Electric Machines, Power Electronics and Drives, 7-9 September, Cracow, Poland, 2007.http://ieeexplore.ieee.org/Xplore/guesthome.jsp
    • Lebaroud Abdesselam, Clerc Guy, “On-line diagnosis of induction motor faults, SETIT’4, 4th International Conference: Sciences of Electronic, Technologies of Information and Telecommunications March 25-29, TUNISIA, 2007.
    • Lebaroud Abdesselam, Clerc Guy ” Time-Frequency Classification Applied to Induction Machine Faults
      Monitoring”. 9-12 September, IEEE IECON, Paris,http://ieeexplore.ieee.org/Xplore/guesthome.jsp
    • Lebaroud Abdesselam, Bentounsi Amar, Clerc Guy, « Detailed Study of the Rotor Asymmetry Effects of Induction Machine Under Different Supply Conditions, 1 1th European conference of power electronics and applications (EPE’05) in Dresden, Allemagne, 2005.http://ieeexplore.ieee.org/Xplore/guesthome.jsp
    • Lebaroud Abdesselam, Bentounsi Amar, “monitoring of induction motor faults under distorted supply conditions », SETIT, International conference: sciences of electronic technologies of information and telecommunications, Tunisia, 2004.
    • Lebaroud Abdesselam, Bentounsi Amar, Khezzar Abdelmalek, Boucherma Mohamed, » Effects of Broken Bar Induction Motor with Stator Asymmetry and Distorted Supply, International conference in electrical machines (ICEM’04), Cracow, Poland, 2004.
    • Khezzar A., Oumaamar M.E.K., Lebaroud Abdesselam, « Novel Study of Induction Motors with Broken Bar Faults « , International conference in electrical machines (ICEM’04), Cracow, Poland, 2004.
    • Khezzar A., Boucherma M., Oumaamar M.E.K., Lebaroud Abdesselam, « Rotor cage Faults Analysis in Three Phase Induction Motors by Parametric and Modified Park Model « , International conference in electrical machines (ICEM’04), Cracow, Poland, 2004.
    • Lebaroud Abdesselam, Bentounsi Amar,  » NDT of faulty induction motor » 1 1th International symposium on applied electromagnetics, ISEM’03, 12-14 Mai, Paris, France, 2003.
    • Lebaroud Abdesselam, Bentounsi Amar « On ligne diagnosis of induction motor faults under different supply voltage » Sixth Intrenational Symposium on Electric and Magnetic Filds, EMF Aachen, Allemagne 6-9 Octobre
    • Chetate Boukhmis., Lebaroud Abdesselam,., Aitouche M.A. & Boumedine M.S, « Elaboration of an automised system for the diagnosis of the breakdown of the electrical machines, converters and control » Proceedings of the 5th International Conference one Modelling and Simulation of Electric Machines, Converters Systems (ELECTRIMACS ’96), pp.1061-1065, 1996.
    • Chetate Boukhmis., Lebaroud Abdesselam,, « Elaboration d’un Système d’Acquisition de Traitement et ie Bouguerne Abla, Lebaroud Abdesselam, BOUKADOUM Aziz, » New Method of Data Treatment Related to Induction Machine Bearing Fault Using Axial Vibration Analytic Signal”, EVER’ 13, International conference and exhibition on ecologic vehicles and renewable energies, 27-30 March, Monaco, 2013. http://ieeexplore.ieee.org/Xplore/guesthome.jsp
    • Medoued, Lebaroud Abdesselam, A.Laifa, D.Sayad, »Feature Form Extraction and Optimization of Induction Machine Faults Using PSO Technique », 3rd International Conference on Electric Power and Energy Conversion Systems Yildiz Technical University, Istanbul, TURKEY, October 2-4, 2013.
    • Bouchareb, A. Bentounsi, and Lebaroud Abdesselam, “Fault Detection and Diagnosis in a Set “Inverter­Switched Reluctance Motor” Based on Pattern Recognition Using Kalman Filter Prediction”, 15th International Symposium on Applied Electromagnetics and Mechanics, ISEM 2013, Quebec, Canada. www.isem2013.gel.ulaval.ca
    • Bouguerne Abla, Lebaroud Abdesselam, Boukadoum Aziz, » Backpropagation algorithm for diagnosis of Induction Machine Faults », fourth international renewable energy congress, (IREC 2012), Souss, Tunisia, 2012. http://www.irec.cmerp.net/
    • Bouguerne Abla, Lebaroud Abdesselam, Boukadoum Aziz, » A New diagnosis Method of Induction Machine Faults Using Fuzzy K-Nearest Neighbor », 13th International conference on sciences and techniques of automatic control and computer, (STA’2012), Monastir, Tunisia,
    • Bouguerne Abla, Lebaroud Abdesselam, Boukadoum Aziz “Time-Frequency Representation and Neural Networks for Classification of Induction Machine Faults”, EVER’ 12, International conference and exhibition on ecologic vehicles and renewable energies, 22-25 March, Monaco, 2012.http://conference.evermonaco.com/files/ever12 final program.pdf
    • Soualhi Abdenour, Clerc Guy, Hubert Razik, Lebaroud Abdesselam,” Fault Detection and Diagnosis of Induction Motors Based on Hidden Markov Model, International conference in electrical machines (ICEM’ 12), Marseille, France, 2012.http://ieeexplore.ieee.org/Xplore/guesthome.jsp
    • Medoued Amar, Lebaroud Abdesselam, “ Application of Hilbert transforms to fault detection in electric machines”, International conference on applied analysis and algebra, Istanbul, Turkey 20-24 June, 2012. http://www.ica12.yildiz.edu.tr/About.aspx
    • Bouchareb Ilhem, Bentounsi Amar, Lebaroud Abdesselam, Batoun Bachir Three dimension Time-Frequency approach for diagnosing eccentricity faults in Switched Reluctance motor”, 06th International Conference: Science of electronics, technologies of information and telecommunications “SETIT 2012”, Souss 21-24 March 2012,http://ieeexplore.ieee.org/Xplore/guesthome.jsp
    • Bouguerne Abla, Lebaroud Abdesselam, and Ammar Medoued “Classification of Induction Machine Faults by K­nearest Neighbor”, 7th International Conference on Electrical and Electronics Engineering, (ELECO), 1-4. December, Bursa, TURKEY, 2011. http://ieeexplore.ieee.org/Xplore/guesthome.jsp
    • Boukra Tahar and Lebaroud Adesselam”Neural-Network Approaches for Classification of Induction Machine Faults Using Optimal Time-Frequency Representations”, 7th International Conference on Electrical and Electronics Engineering, (ELECO), 1-4 December, Bursa, TURKEY, 2011.http://ieeexplore.ieee.org/Xplore/guesthome.jsp
    • Bouchareb Ilhem, Bentounsi Amar, Lebaroud Abdesselam, Nouicer Abdelmadjid “A Comparative Study of Synchronous Reluctance and Switched Reluctance Motors for High-Performance Fault-Tolerant Applications”, 15th International Symposium on Applied Electromagnetics and Mechanics ISEM 2011, 6-9 September 2011, Napoli, Italy. http://isem2011.unina.it/ISEM2011 final program.pdf
    • Ilhem Bouchareb, Bachir Batoun, Amar Bentounsi and Abdesselam Lebaroud, «Study on Fault Tolerant Power Converter for Switched Reluctance Drive Using Coupled Circuit-FEM», Sixth International Conference and Exhibition on Ecological Vehicles and Renewable Energies EVER’ 10, March 31- April 3, 2011, Monte-Carlo (Monaco).
    • Medoued Amar, Lebaroud Abdesselam, Boukadoum Ahcen, Boukra Tahar, Clerc Guy “Back Propagation Neural Network for Classification of Induction Machine Faults ”, 8th SDEMPED, IEEE Symposium on Diagnostics for Electrical Machines, Power Electronics & Drives September 5-8, Bologna, Italy, 2011. http://ieeexplore.ieee.org/Xplore/guesthome.jsp
    • Lebaroud Abdesselam Clerc Guy and Medoued Ammar “Analysis of Inter-Turn Short Circuit in Slots by Finite Element Model”, EEEIC 2011, International Conference on Environment and Electrical Engineering, 8-11 mai, Rome, 2011.http://ieeexplore.ieee.org/Xplore/guesthome.jsp
    • Boukra Tahar, Lebaroud Abdesselam, and Clerc Guy, “Neural-Network Approaches for Classification of InductionMachine Faults Using Optimal Time-Frequency” EEEIC 2011, International Conference on Environment and Electrical Engineering Rome 8-11 mai 2011. http://ieeexplore.ieee.org/Xplore/guesthome.jsp ee.org/Xplore/guesthome.jsp
    • Bouguerne Abla, Lebaroud Abdesselam, BOUKADOUM Aziz, » New Method of Data Treatment Related to Induction Machine Bearing Fault Using Axial Vibration Analytic Signal”, EVER’ 13, International conference and exhibition on ecologic vehicles and renewable energies, 27-30 March, Monaco, 2013. http://ieeexplore.ieee.org/Xplore/guesthome.jsp
    • Medoued, Lebaroud Abdesselam, A.Laifa, D.Sayad, »Feature Form Extraction and Optimization of Induction Machine Faults Using PSO Technique », 3rd International Conference on Electric Power and Energy Conversion Systems Yildiz Technical University, Istanbul, TURKEY, October 2-4, 2013.
    • Bouchareb, A. Bentounsi, and Lebaroud Abdesselam, “Fault Detection and Diagnosis in a Set “Inverter­Switched Reluctance Motor” Based on Pattern Recognition Using Kalman Filter Prediction”, 15th International Symposium on Applied Electromagnetics and Mechanics, ISEM 2013, Quebec, Canada. www.isem2013.gel.ulaval.ca
    • Bouguerne Abla, Lebaroud Abdesselam, Boukadoum Aziz, » Backpropagation algorithm for diagnosis of Induction Machine Faults », fourth international renewable energy congress, (IREC 2012), Souss, Tunisia, 2012. http://www.irec.cmerp.net/
    • Bouguerne Abla, Lebaroud Abdesselam, Boukadoum Aziz, » A New diagnosis Method of Induction Machine Faults Using Fuzzy K-Nearest Neighbor », 13th International conference on sciences and techniques of automatic control and computer, (STA’2012), Monastir, Tunisia, 2012. http://www.sta-tn.com/
    • Bouguerne Abla, Lebaroud Abdesselam, Boukadoum Aziz “Time-Frequency Representation and Neural Networks for Classification of Induction Machine Faults”, EVER’ 12, International conference and exhibition on ecologic vehicles and renewable energies, 22-25 March, Monaco, 2012. http://conference.evermonaco.com/files/ever12 final program.pdf
    • Soualhi Abdenour, Clerc Guy, Hubert Razik, Lebaroud Abdesselam,” Fault Detection and Diagnosis of Induction Motors Based on Hidden Markov Model, International conference in electrical machines (ICEM’ 12), Marseille, France, 2012.http://ieeexplore.ieee.org/Xplore/guesthome.jsp
    • Medoued Amar, Lebaroud Abdesselam, “ Application of Hilbert transforms to fault detection in electric machines”, International conference on applied analysis and algebra, Istanbul, Turkey 20-24 June, 2012. http://www.ica12.yildiz.edu.tr/About.aspx
    • Bouchareb Ilhem, Bentounsi Amar, Lebaroud Abdesselam, Batoun Bachir Three dimension Time-Frequency approach for diagnosing eccentricity faults in Switched Reluctance motor”, 06th International Conference: Science of electronics, technologies of information and telecommunications “SETIT 2012”, Souss 21-24 March 2012,http://ieeexplore.ieee.org/Xplore/guesthome.jsp
    • Bouguerne Abla, Lebaroud Abdesselam, and Ammar Medoued “Classification of Induction Machine Faults by K­nearest Neighbor”, 7th International Conference on Electrical and Electronics Engineering, (ELECO), 1-4. December, Bursa, TURKEY, 2011. http://ieeexplore.ieee.org/Xplore/guesthome.jsp
    • Boukra Tahar and Lebaroud Adesselam”Neural-Network Approaches for Classification of Induction Machine Faults Using Optimal Time-Frequency Representations”, 7th International Conference on Electrical and Electronics Engineering, (ELECO), 1-4 December, Bursa, TURKEY, 2011.http://ieeexplore.ieee.org/Xplore/guesthome.jsp
    • Bouchareb Ilhem, Bentounsi Amar, Lebaroud Abdesselam, Nouicer Abdelmadjid “A Comparative Study of Synchronous Reluctance and Switched Reluctance Motors for High-Performance Fault-Tolerant Applications”, 15th International Symposium on Applied Electromagnetics and Mechanics ISEM 2011, 6-9 September 2011, Napoli, Italy. http://isem2011.unina.it/ISEM2011 final program.pdf
    • Ilhem Bouchareb, Bachir Batoun, Amar Bentounsi and Abdesselam Lebaroud, «Study on Fault Tolerant Power Converter for Switched Reluctance Drive Using Coupled Circuit-FEM», Sixth International Conference and Exhibition on Ecological Vehicles and Renewable Energies EVER’ 10, March 31- April 3, 2011, Monte-Carlo (Monaco).
    • Medoued Amar, Lebaroud Abdesselam, Boukadoum Ahcen, Boukra Tahar, Clerc Guy “Back Propagation Neural Network for Classification of Induction Machine Faults ”, 8th SDEMPED, IEEE Symposium on Diagnostics for Electrical Machines, Power Electronics & Drives September 5-8, Bologna, Italy, 2011. http://ieeexplore.ieee.org/Xplore/guesthome.jsp
    • Lebaroud Abdesselam Clerc Guy and Medoued Ammar “Analysis of Inter-Turn Short Circuit in Slots by Finite Element Model”, EEEIC 2011, International Conference on Environment and Electrical Engineering, 8-11 mai, Rome, 2011.http://ieeexplore.ieee.org/Xplore/guesthome.jsp
    • Boukra Tahar, Lebaroud Abdesselam, and Clerc Guy, “Neural-Network Approaches for Classification of InductionMachine Faults Using Optimal Time-Frequency” EEEIC 2011, International Conference on Environment and Electrical Engineering Rome 8-11 mai 2011. http://ieeexplore.ieee.org/Xplore/guesthome.jsp
    • Bouchareb Ilhem, Bentounsi Amar, Lebaroud Abdesselam, Bouchahdane Mouhamed, Rebbahi Fares, Batoun Bachir Modeling and Detection of Eccentricity Fault in Switched Reluctance Motor”, 2011, 10th International Conference on Environment and Electrical Engineering (EEEIC) 8-11 mai, Rome, 2011. http://ieeexplore.ieee.org/Xplore/guesthome.jsp
    • Lebaroud Abdesselam, Clerc Guy, “Analysis of stator short-circuit faults for induction machine using finite element modeling”, 7th IEEE international multiconference on systems, signals and devices (SSD10), Amman, Jordan, 2010.http://ieeexplore.ieee.org/Xplore/guesthome.jsp
    • Boukra Taher, Lebaroud Abdesselam, “Classification of induction machine faults”, 7th IEEE international multiconference on systems, signals and devices (SSD10), Amman, Jordan, Juin 2010. http://ieeexplore.ieee.org/Xplore/guesthome.jsp
    • Medoued Ammar, Lebaroud Abdesselam, Boukadoum Ahcen, » Monitoring techniques of Induction Motors Faults « , 3th International conference on nonlinear sciences and complexity (NSC10), Ankara, Turkey, 28-31 July 2010. http://nsc10.cankaya.edu.tr/PosterSession.pdf
    • Lebaroud Abdesselam, Clerc Guy, “ Study of rotor asymmetry by finite element model of the induction machine”, 6th International Conference on Electrical and Electronics Engineering, (ELECO), proceeding, pp. 401-404, Bursa, TURKEY, 2009.http://ieeexplore.ieee.org/Xplore/guesthome.jsp
    • Medoued Ammar, Lebaroud Abdesselam, Boukadoum Ahcen, “On-line monitoring and diagnosis of broken rotor bar in induction motor”, 6th International Conference on Electrical and Electronics Engineering, (ELECO), proceeding, pp. 405-409, , Bursa, Turkey, 2009. http://ieeexplore.ieee.org/Xplore/guesthome.jsp
    • Lebaroud Abdesselam, Clerc Guy “Diagnosis of Induction Motor Faults Using Instantaneous Frequency Signature Analysis, International conference in electrical machines (ICEM’08), Vilamoura (Algarve), Portugal, September 2008.http://ieeexplore.ieee.org/Xplore/guesthome.jsp
    • Lebaroud Abdesselam, Clerc Guy,” Monitoring and diagnostic of induction motors stator faults” AMSE Modeling, Simulation & Control, Port Said / Egypt, 2008.
    • Lebaroud Abdesselam, Clerc Guy ” Diagnosis of induction machine by time frequency representation and hidden Markov modelling”, Proc. IEEE SDEMPED 2007 – Symposium on Diagnostics for Electric Machines, Power Electronics and Drives, 7-9 September, Cracow, Poland, 2007.http://ieeexplore.ieee.org/Xplore/guesthome.jsp
    • Lebaroud Abdesselam, Clerc Guy, “On-line diagnosis of induction motor faults, SETIT’4, 4th International Conference: Sciences of Electronic, Technologies of Information and Telecommunications March 25-29, TUNISIA, 2007.
    • Lebaroud Abdesselam, Clerc Guy ” Time-Frequency Classification Applied to Induction Machine Faults
      Monitoring”. 9-12 September, IEEE IECON, Paris,http://ieeexplore.ieee.org/Xplore/guesthome.jsp
    • Lebaroud Abdesselam, Bentounsi Amar, Clerc Guy, « Detailed Study of the Rotor Asymmetry Effects of Induction Machine Under Different Supply Conditions, 1 1th European conference of power electronics and applications (EPE’05) in Dresden, Allemagne, 2005.http://ieeexplore.ieee.org/Xplore/guesthome.jsp
    • Lebaroud Abdesselam, Bentounsi Amar, “monitoring of induction motor faults under distorted supply conditions », SETIT, International conference: sciences of electronic technologies of information and telecommunications, Tunisia, 2004.
    • Lebaroud Abdesselam, Bentounsi Amar, Khezzar Abdelmalek, Boucherma Mohamed, » Effects of Broken Bar Induction Motor with Stator Asymmetry and Distorted Supply, International conference in electrical machines (ICEM’04), Cracow, Poland, 2004.
    • Khezzar A., Oumaamar M.E.K., Lebaroud Abdesselam, « Novel Study of Induction Motors with Broken Bar Faults « , International conference in electrical machines (ICEM’04), Cracow, Poland, 2004.
    • Khezzar A., Boucherma M., Oumaamar M.E.K., Lebaroud Abdesselam, « Rotor cage Faults Analysis in Three Phase Induction Motors by Parametric and Modified Park Model « , International conference in electrical machines (ICEM’04), Cracow, Poland, 2004.
    • Lebaroud Abdesselam, Bentounsi Amar,  » NDT of faulty induction motor » 1 1th International symposium on applied electromagnetics, ISEM’03, 12-14 Mai, Paris, France, 2003.
    • Lebaroud Abdesselam, Bentounsi Amar « On ligne diagnosis of induction motor faults under different supply voltage » Sixth Intrenational Symposium on Electric and Magnetic Filds, EMF Aachen, Allemagne 6-9 Octobre
    • Chetate Boukhmis., Lebaroud Abdesselam,., Aitouche M.A. & Boumedine M.S, « Elaboration of an automised system for the diagnosis of the breakdown of the electrical machines, converters and control » Proceedings of the 5th International Conference one Modelling and Simulation of Electric Machines, Converters Systems (ELECTRIMACS ’96), pp.1061-1065, 1996.
    • Chetate Boukhmis., Lebaroud Abdesselam,, « Elaboration d’un Système d’Acquisition de Traitement et d’Interprétation de l’Information pour le Diagnostic des Pannes », Proceedings of Mediterranean Conference on Electronics and Automatic (MCEA’95), Septembre 13 / 15, 1995 Grenoble (France), pp 825 – 831.
    • Chetate Boukhmis., Lebaroud Abdesselam, « Development of an automated system of forecasting and diagnosis of the anomalies », Proceedings of the second Maghreb Convention in Electrical Engineering (CMGE’95), Volume II, pp. GLI 17-GLI 20, Tunis, 16-17 September 1995.
    • Lebaroud Abdesselam, Medoued Ammar, «  New method dedicated to faults classification of induction machines”, International Conference on Electromechanical Engineering (ICEE’2014), Skikda, Algeria, 10-12 November 2014.
    • Bouguerne Abla, Lebaroud Abdesselam,  » K- Means Clustering Algorithm For Classification of Ball Bearing Faults ”, International Conference on Electromechanical Engineering (ICEE’2014), Skikda, Algeria, 10-12 November
    • Lebaroud Abdesselam, Medoued Ammar «  Amélioration de la détection des défauts de la machine asynchrone«  International Conference on technological advances on electrical engineering, ICTAEE 14, , université de Skikda, 27-28 Octobre 2014.
    • Medoued Ammar. Lebaroud Abdesselam  » Surveillance des défaut du moteur asynchrone par la fréquence instantannée«  International Conference on technological advances on electrical engineering, ICTAEE 14, université de Skikda, 27-28 Octobre 2014.
    • Bouguerne Abla, Lebaroud Abdesselam , BOUKADOUM AZIZ « classification method of vibration data for bearing faults », Conférence Internationale sur la maintenance et la sécurité industrielle, CIMSI’2013, Skikda, Algeria, 28- 29 Octobre 2013.
    • Medoued Ammar. Lebaroud Abdesselam, Sayad Djamel « Diagnostic des defaults rotoriques du moteur à induction par la technique de la phase du spectre », Conférence Internationale sur la maintenance et la sécurité industrielle, CIMSI’2013, Skikda, Algeria, 28-29 Octobre 2013.
    • Lebaroud Abdesselam, Bounama Mohamed, Medoued Ammar, Laifa Aziz; « Optimisation par essaim particulaire des vecteurs formes dédiées au diagnostic des défauts », International Conference on Electromechanical Engineering (ICEE’2012), Skikda, Algeria, 20-22 November 2012. http://ftech.univ-skikda.dz/images/doc/depliant icee.pdf
    • Medoued Ammar. Lebaroud Abdesselam, Sayad Djamel, Metatla A, « Detection of Induction Machine Rotor Faults Using the Spectrum Phase Technique », International Conference on Electromechanical Engineering (ICEE’2012), Skikda, Algeria, 20-22 November 2012.http://ftech.univ-skikda.dz/images/doc/depliant icee.pdf
    • Bouguerne Abla, Lebaroud Abdesselam, « Automatic Diagnosis of Induction Machine Faults”, International Conference on Electromechanical Engineering (ICEE’2012), Skikda, Algeria, 20-22 November 2012. http://ftech.univ-skikda.dz/images/doc/depliantpdf
    • Bouchareb Ilhem, Bentounsi Amar, Lebaroud Abdesselam and Batoun Bachir, « On line diagnosis of faults on switched reluctance motor using coupled circuit-FEM”, International symposium on environment friendly energies in electrical applications », EFEEA’2010, Gherdaia, Algeria, 02-04 November 2010. http://www.umc.edu.dz/vf/proceeding/efeea-2010/CD Absracts.pdf
    • Medoued Ammar, Lebaroud Abdesselam, Boukadoum Ahcen «Surveillance et Diagnostic du Défaut de déséquilibre des Moteurs Induction » la première Conférence Maghrébine sur Maintenance et la Sécurité, outils de l’excellence industrielle (C2MSI’09) Souk Ahres 28-29 Avril 2009.
    • Medoued Ammar, Lebaroud Abdesselam, Boukadoum Ahcen «Surveillance et Diagnostic en ligne de Défaut de déséquilibre statorique des Moteurs Induction » International Conference on systèmes and information processing (ICSIP’09) May 2-4,2009, Guelma, Algérie. http://www.univ-guelma.dz/icsip09/ICSIP’09%20Program.pdf
    • Lebaroud Abdesselam, Clerc Guy, “Automatic Diagnosis of induction motor faults » 7° journées scientifiques et techniques, Hôtel Sheraton, Oran, Algérie,2006.
    • Lebaroud Abdesselam, Bentounsi Amar « Monitoring of stator and rotor faults of induction motor under different supply conditions » CIGE’ 2004, première Conférence internationale sur le genie électrique », Béchar, 2004.
    • Lebaroud Abdesselam, Bentounsi Amar  » Diagnostic en ligne des moteurs électriques associés à des convertisseurs MLI. » SIPE’06, 6éme Séminaire International sur la Physique Energétique, Béchar 2 1/23 Oct 2002.
    • Lebaroud Abdesselam, Bentounsi Amar « Applications des systèmes experts en maintenance et en temps réel dans le secteur des hydrocarbures », El-Aurassi, Alger , 4ème journées scientifiques et techniques, 16/19 Avril 2000.
    • Lebaroud Abdesselam, Bentounsi Amar « signal processing and failure diagnosis of electric power station in real time » SIPE’5, 5éme Séminaire International sur la Physique Energétique, Béchar 7/9 Novombre 2000.
    • Lebaroud Abdesselam, Chetate Boukhmiss  » Real-Time Intelligent Failure Diagnosis of Electromechanical Systems », Proceeding des 3ème Journées Maghrébines sur la Mécanique (JMM’97), Guelma (Algérie), 29 et 30 Lebaroud Abdesselam, Boukhmiss Chetate « Elaboration d’un Module d’Interprétation de l’Information et son Application pour l’Identification des Défauts d’un Moteur Asynchrone », International Annual Conference of the University of Batna, (IEEA’97), Batna, 07 et 09 Décembre 1997, pp 94 – 97.
    • Medoued Ammar, Lebaroud Abdesselam, Djamel .Sayad, Boukadoum Ahcen and Boukra Tahar, « Application de la transformée de Hilbert pour la détection des defaults dans les machines électriques « Journées nationales sur le £mathématiques appliquées (JNMA’ 11), 29-3 0 novembre 2011, Skikda, Algérie.
    • Lebaroud Abdesselam, Bentounsi Amar  » Diagnostic en ligne des moteurs à induction associés à des sources non idéales » CGE’02, Ecole militaires polytechnique, Alger, 17-18 Décembre 2002.
    • Lebaroud Abdesselam, Bentounsi Amar « Les effets de la distorsion de la tension sur le processus de diagnostic des défauts dans les moteurs électriques » CEE’02, conference on electrical engineering, Batna,10-1 1 Dec 2002.
    • Lebaroud Abdesselam, Bentounsi Amar  » Diagnostic en ligne des moteurs à induction associés à des sources non idéales » CNIE 02 , conférence nationale sur l’ingénierie de l’électronique, 15-16 Décembre, USTO, Oran, 2002.
    • Lebaroud Abdesselam , Chetate Boukhmiss « Etude par Simulation Numérique du Comportement d’un Moteur Asynchrone Alimenté par Onduleur de Tension Piloté par Différentes Stratégies de Commande « , Actes des 2ème Journées Scientifiques et Techniques (JST’97), INHC, Boumerdès, 05 et 06 Mai 1997, pp 150
    • Lebaroud Abdesselam , Chetate Boukhmiss « Etude par Simulation Numérique du Comportement d’un Moteur Asynchrone Alimenté par Onduleur de Tension Piloté par Différentes Stratégies de Commande « , Actes des 2ème Journées Scientifiques et Techniques (JST’97), INHC, Boumerdès, 05 et 06 Mai 1997, pp 150
    • Lebaroud Abdesselam, Boukhmiss Chetate  » Etude de l’apport d’un Système Automatisé de diagnostique des Pannes par Simulation Numérique des Régimes à Défauts d’un Moteur Asynchrone « , Proceedings of Conference on Modelling and Simulation of Electrical Systems (CMSES’95), Guelma (Algérie), 07 et 08 Novembre 1995, pp 116
    • Derbal Kerroum, Brihi Houria, Kheireddine Bani, Bencheikh-LeHocine Mossaab, Meniai Abdesselem Hassen, “Study of inhibiting effect of NaCl on the biodegradability of dairy wastes”, International Renewable Energy Congress, December 20-22, 2012, Hammamet, Tunisia.
    • Derbal Kerroum, Guessoum Hala, Boumaza Amina, Bencheikh-LeHocine Mossaab, Meniai Abdesselem Hassen, “Experimental study of biodegradability of dairy waste in mesophilic conditions”, International Renewable Energy Congress, December 20-22, 2012, Hammamet, Tunisia.
    • Derbal K. Benmakhlouf N., Goutal A., Tabi M., Bencheikh-LeHocine M., Meniai A-H., “Modeling of Anaerobic Digestion Used for Biogas Production: Effects of Kinetics Parameter”, Conference of Clean Energy Solutions for Sustainable, February 16-19, 2012, Beirut, Lebanon.
    • Derbal Kerroum, Bencheikh-LeHocine Mossaab, Meniai Abdesselem Hassen, “Sensibility of bio-methane production to kinetics parameters constants in co-digestion process”, Eurasia Waste Management Symposium, 14-16 November 2011, Istanbul, Turkey.
    • Derbal Kerroum, Bencheikh-LeHocine Mossaab, Meniai Abdesselem Hassen, “Production of biogas from organic solid waste in thermophilic phase”, Euromediterranean scientific congress on engineering (EMSCE2011), 19-20 may 2011, Algeciras, Spain.
    • Derbal Kerroum, Bencheikh-LeHocine Mossaab, Meniai Abdesselem Hassen, “Use of IWA ADM1 Model to simulate anaerobic digestion of organic waste”, Euromediterranean scientific congress on engineering (EMSCE2011), 19-20 may 2011, Algeciras, Spain.
    • Derbal Kerroum, Bencheikh-LeHocine Mossaab, Meniai Abdesselem Hassen, “Production of biogas from solid waste: effect of temperature and substrate composition”, Euromediterranean scientific congress on engineering, 19-20 may 2011, Algeciras, Spain.
    • Derbal Kerroum, Benmakhlouf Nadjiba, Goutal Amina, Tabi Meriem, Bencheikh Le-hocine Mossaab, Meniai Abdessalam Hassen, “Modélisation de la digestion anaérobie : effets des constants cinétiques”, Vème congrès international sur les énergies renouvelable et l’environnement, November, 04-06, 2010, Sousse, Tunisia.
    • Derbal, M. Bencheikh-Lehocine, A-H. Meniai, D. Bolzonella, M. Zanette, C. Cavinato, “Application of IWA model    to simulate the anaerobic co-digestion of organic solids waste mixed with sludge in thermophilic conditions”, Congrès SFGP, 14-16 Octobre 2009, Marseille, France.
    • Derbal, M. Bencheikh Le-hocine, A-H. Meniai, D. Bolzonella, M. Zanette, C. Cavinato, “Production de biogaz à partir des déchets organiques municipaux à la phase thermophile”, Congress on the Engineering of Renewable Energies, March, 19-21, 2009, Hammamet, Tunisia.
    • Derbal, M. Bencheikh Le-hocine, A-H. Meniai, F. Cecchi, , D. Bolzonella, P. Pavan, M. Zanette, C. Cavinato, “Production of biogas from organics waste with waste activated sludge in mesophilic condition”, Congress on the Engineering of Renewable Energies, March, 19-21, 2009, Hammamet, Tunisia.
    • Derbal, M. Bencheikh-lehocine, A-H. Meniai, F. Cecchi, D. Bolzonella, M. Zanette, C. Cavinato, «Valorisation énergétique des boues de station d’épurations pour la protection de l’environnement », journée mondiale de l’environnement JME2009, 7-8 Juin 2009, Skikda, Algérie.
    • Derbal, A. Khalfaoui, M. Bencheikh-Lehocine, A-H. Meniai, “ Optimisation de l’élimination de la matière active au niveau de la station de traitement des eaux (usine de détergent chelghoum El Aïd, Algérie)”, Congress on the Engineering of Renewable Energies, November, 06-08 2006, Hammamet, Tunisia.
    • Derbal, M. Bencheikh-Lehocine, A. Khalfaoui, A-H. Meniai, “ Energetic valorization of biodegradable solid wastes”, First Mediterranean Congress, Chemical Engineering for Environment, October, 04-06 2006, San Servolo Venice, Italy.
    • Khalfaoui A., Bencheikh-Lehocine M., Meniai A-H., Derbal K., “Etude numérique de certains paramètres influençant la variation de la concentration de l’oxygène dissous et de la température dans une lagune naturelle”, 7ème Congrès National de la Société Algérienne de Chimie, 16-18 Mai 2006, Oran, Algérie.
    • Derbal, A. Khalfaoui, M. Bencheikh-lehocine, A-H. Meniai, «  Traitement biologique des déchets solides biodégradable pour la production de l’énergie et la protection de l’environnement », 3ème colloque maghrébin de géophysique appliquée, 11-13 mai 2006, Oujda, Maroc.
    • Khalfaoui, K. Derbal, M. Bencheikh-lehocine, A-H. Meniai, «  Etude dynamique de certains paramètres influençant la variation de la concentration de l’oxygène dissous et de la température dans une lagune naturelle », 3ème colloque maghrébin de géophysique appliquée, 11-13 mai 2006, Oujda, Maroc.
    • Derbal, A. Khalfaoui, M. Bencheikh-lehocine, A-H. Meniai, «  Modélisation d’un procédé biologique de traitement des déchets solides pour la production de l’énergie et la protection de l’environnement », 3rd International Symposium on Hydrocarbons and Chemistry, 27-29 march 2006, Ghardaia, Algérie.
    • Khalfaoui A., Derbal K., Chetibi F., Tamene M., Bencheikh Lehocine M., Meniai A-H., “ Etude expérimentale des différents paramètres influençant la coagulation-floculation-sédimentation au niveau de la station de traitement des eaux « Oued El Euthmania », Constantine ”, 3rd International Symposium on Hydrocarbons and Chemistry, 27-29 march 2006, Ghardaia, Algérie.
    • Khalfaoui A., Derbal K., Chetibi F., Tamene M., Bencheikh Lehocine M., Meniai A-H., “ Etude expérimentale des différents paramètres influençant la coagulation-floculation-sédimentation au niveau de la station de traitement des eaux « Oued El Euthmania », Constantine ”, Séminaire National, 05-07 Décembre 2005, Annaba, Algérie.
    • Derbal K., Outili N.,Rasi N., Boukhalfa S., Daoudi N.,Khalfaoui A., “ Modélisation de la qualité de l’eau dans un lac ”, le 1er Séminaire International sur l’Environnement et ses Problèmes Connexes, 05-07 juin 2005, Béjaia, Algérie.
    • Khalfaoui A., Bencheikh Lehocine M., Meniai A-H., Derbal K., “ Modélisation de la variation de la concentration de l’oxygène dissous et de la température dans un système d’épuration par lagunage ”, le 1er séminaire international sur l’environnement et ses problèmes connexes, 05-07 juin 2005, Béjaia, Algérie.
    • Derbal K., Lehman M., cholmayer S., Kasper G., “ l’Influence du diamètre d’un échantillon du filtre à fibre sur la chute de pression dans un anneau d’essai ”, 37ème internationale séminaire sur la recherche et l’enseignement de génie chimique et chimie physique à l’université de karlsruhe, Juillet 2002, Karlsruhe, Allemagne.
    • Derbal K., Bencheikh Lehocine M., Meniai A-H., “ Développement d’un logiciel de dimensionnement de station de traitement des eaux usées sous AutoCad (StepCad2)”, 4ème journées scientifiques et techniques de Sonatrach, 16-19 Avril 2000, Alger, Algérie.
    • Derbal K., Bencheikh Lehocine M., Meniai A-H., “ Développement d’un logiciel de dimensionnement de station de traitement des eaux usées sous AutoCad (StepCad1)”, 2ème Journées scientifiques et techniques, 16-17 Novembre 1999, Ouergla, Algérie.
    • Derbal K., Bencheikh Lehocine M., Meniai A-H., “ Développement d’un logiciel de dimensionnement de station de traitement des eaux usées sous AutoCad (StepCad0)”, Journées de l’eau, 5-6 Juin 1999, Boumerdes, Algérie
    • Ilhem Bouchareb, Amar Bentounsi, Abdesselam Lebaroud, Bachir Batoun and Radjem Rebbah, «On Line Diagnosis ofFaults on Switched Reluctance Motor Using Coupled Circuit­FEM», EFEEA’10 International Symposium on Environment Friendly Energies in Electrical Applications, 02-04 November 2010, Ghardaïa, Algeria.
    • Ilhem Bouchareb, Bachir Batoun, Amar Bentounsi and Abdesselam Lebaroud, «Study onFault Tolerant Power Converter for Switched Reluctance Drive Using Coupled Circuit­FEM», Sixth International Conference and Exhibition on Ecological Vehicles and Renewable Energies EVER’10, March 31- April 3, 2011, Monte-Carlo (Monaco).
    • Ilhem Bouchareb, Amar Bentounsi, Abdesselam Lebaroud, Fares Rebbahi, Bachir Batoun, «Modeling and Detection of Eccentricity Fault in Switched Reluctance Motor», 10th International Conference on Environment and Electrical Engineering EEEIC 2011, 8-11 Mai 2011, Rome.
    • Ilhem Bouchareb, Amar Bentounsi, Abdesselam Lebaroud, «A Comparative Study of Synchronous Reluctance and Switched Reluctance Motors for HighPerformance Fault­Tolerant Applications», 15th International Symposium on Applied Electromagnetics and Mechanics ISEM 2011, 7-9 September 2011, Napoli.
    • Ilhem Bouchareb, Amar Bentounsi, Abdesselam Lebaroud and Bachir Batoun, «Dynamic Eccentricity Fault Detection In Switched Reluctance Motor Using TimeFrequency Analysis », 6th International conference on Sciences of Electronics, Technologies of Information and Telecommunication SETIT 2012, 2 1-24 March 2012, Tunisia.
    • Ilhem Bouchareb, Amar Bentounsi, Abdesselam Lebaroud, «Fault Detection and Diagnosis in a Set InverterSwitched Reluctance MotorBased on Pattern Recognition Using Kalman Filter Prediction», 16th International Symposium on Applied Electromagnetics and Mechanics ISEM 2013,31 July -2 August 2013, Canada.
    • Ilhem Bouchareb, Amar Bentounsi, Abdesselam Lebaroud, «An Integrated Artificial Neural Networks/Optimal TimeFrequency Based Classification in Condition Monitoring of Synchronous Reluctance Motor Stator Fault», 9th IEEE International Symposium on Diagnostics for Electrical Machines, Power Electronics & Drives SDEMPED 2013, 27-30 August 2013, Spain.
    • Ilhem Bouchareb, Amar Bentounsi, Abdesselam Lebaroud, «Classification Methodfor Faults Diagnosis in Reluctance Motors Using Hidden Markov Models », 23rd IEEE International Symposium on Industrial Electronics, ISIE 2014, 1-4 Juin 2014, Turkey.
    • Ilhem Bouchareb, Amar Bentounsi, Abdesselam Lebaroud, Tianzhen. Wang and E.H. Benbouzid, «Optimum Feature Extraction and Selection for Automatic Fault Diagnosis ofReluctance Motors», 40th Annual Conference of IEEE Industrial Electronics Society, IECON 2014, October 29- November 1, 2014, Dallas, TX – USA.
    • Ilhem Bouchareb, Amar Bentounsi, Abdesselam Lebaroud and Rebahi Fares, «Automatic Fault diagnosis ofFault Tolerant Power Converter for Switched Reluctance Motor based on Time­Frequency Technique», 1 6th International Power Electronics and Motion Control Conference and Exposition, PEMC

    Mémoire de magister encadres par le Prof. Djamel Hamana 

    • Mr Benabdoun Mustapha de 1985 à 1987 (Mémoire soutenu avec mention honorable)
    • Melle Nebti Samia de 1987 à 1989 (Mémoire soutenu avec mention très honorable).
    • Melle Choutri Hassina de 1987 à 1989 (Mémoire soutenu avec mention très honorable).
    • Mr Boutefnouchet Abdelatif de 1989 à 1991 (Mémoire soutenu avec mention très  honorable
    • Mr Boumerzoug Zakaria de 1990 à 1992 (Mémoire soutenu avec mention très  honorable)
    • Mr Benyahia Noureddine (couverture administrative seulement), Mémoire soutenue en octobre 1995 avec mention très honorable.
    • Mr Bouchear Merzoug de décembre 1992 à Juin 1994 (Mémoire soutenu avec mention très honorable).
    • Mr Saheb Nouari de décembre 1992 à Juin 1994 (Mémoire soutenu avec mention très honorable).
    • Mr Chala Abdelouahad  de décembre 1992 à Juin 1994 (Mémoire soutenu avec mention  très honorable).
    • Mr Assaous Boubakeur de Décembre 1993 à Octobre 1995 (Mémoire soutenu le 09/10/1995   avec mention très honorable).
    • Mr Fatmi Messaoud de Novembre 1994 à Octobre 1996 (Mémoire soutenu le 15/10/1996   avec mention très honorable).
    • Mr Derafa Achour de Novembre 1994 à Octobre 1996 (Mémoire soutenu avec mention très honorable)
    • Mme Betrouche Malika de Novembre 1996 à Mai 1998 (Mémoire soutenu avec mention très honorable).
    • Mr Bouderba Hichem de Novembre 1997 à Juillet 1999 (Mémoire soutenu le 03/07/1995  avec mention très honorable).
    • Mr Belhadj Nadir depuis Novembre 1998, mémoire soutenu le 13 Mars 2000 avec mention très honorable.
    • Melle Tellouhe Gamra depuis Novembre 1999, mémoire soutenu le 3 Avril 2001 avec mention très bien.
    • Melle Boufenghour Mounira depuis Novembre 1999, mémoire soutenu le 3 Avril 2001 avec mention très bien.
    • Mr Hachouf Mohamed depuis Novembre 1999, mémoire soutenu le 4 Avril 2001 avec mention très bien.
    • Melle Abdellioua Feriel depuis septembre 2000, mémoire soutenu le 11Mai 2002 avec mention très bien.
    • Melle Baziz Leila depuis septembre 2000, mémoire soutenu le 13 Mai 2002 avec mention très bien.
    • Mr Hayoune Abelali depuis Novembre 2001, mémoire soutenu le 7 Avril 2003 avecmention très bien.
    • Melle Bahroune Moufida depuis Novembre 2001, mémoire soutenu le 9 Avril 2003 avec  mention très bien.
    • Melle Azizi Assia depuis Novembre 2002, mémoire soutenu le17 novembre 2003avec mention Très bien.
    • Melle Boumaza Leila depuis Novembre 2003, mémoire soutenu le 26 juin 2005,  avec mention Très bien.
    • Melle Khadraoui Lamia depuis Novembre 2003, mémoire soutenu le 27 juin 2005,  avec mention Très bien.
    • Melle Bensouyad Hanene a depuis Novembre 2004, mémoire soutenu le 24 Avril 2006, avec mention Très bien.
    • Melle Ayadi Aicha depuis Novembre 2004, mémoire soutenu le 24 Avril 2006,  avec mention Très bien.
    • Melle Laouici Nour El-Houda depuis Novembre 2005 mémoire soutenu le 28 mai 2007, avec mention Très bien.
    • Mr Hanini Fouzi depuis Novembre 2005, mémoire soutenu le 29 mai 2007, avec mention Très bien.
    • Melle Chetibi Loubna depuis Novembre 2006, mémoire soutenu le 13 janvier 2008, avec mention Très bien.
    • Mr Biskri Zine El Abiddine depuis Novembre 2008, mémoire soutenu le 15 Avril  2009, avec mention Très bien.
    • Melle   Mermoul  Soumia depuis novembre 2009, Mémoire soutenu le 16/10/  2009 .avec  mention Très Bien
    • Melle   Khaled Amal depuis novembre 2010, Mémoire soutenu le 16/10/  2009 .avec mention Très Bien.
    • Melle FAR Dalel depuis novembre 2009, Mémoire soutenu en décembre 2011.

     

    Mémoire de magister encadres par le Prof. Khalfallah Salah

    • ILLAS Chahra, Université de Jijel, Soutenu le 25/10/2008. Etude géologique et géotechnique du tunnel de oued dar el oued- Wilaya de Jijel.
    • BOUZID Mohamed, Université de Annaba, Soutenu le 8/10/2008. Analyse inélastique du comportement des murs en béton armé.
    • CHIKER Tarek, Université de Jijel, Soutenu le 7/1/2008.La carbonatation du béton. Etat de connaissances et étude expérimentale de  l’influence des ciments locaux composés et du CRS. Le 07 janvier 2008.
    • BENKECHKECHE Ghofrane, Université de Constantine, Soutenu le 11/12/2007. Etude du comportement différé des bétons auto-plaçants- Influence des paramètres de composition et de charge.
    • KANIT Ali, Université de Jijel, Soutenu le 27/11/2007. Etude Comparative entre l’influence de l’ajout naturel (calcaire) et l’autre industriel (laitier) et leur influence sur les propriétés mécaniques des mortiers et des bétons.
    • KIMOUCHE Abdelghani, Université de Jijel, Soutenu le 4/6/2006. Optimisation des paramètres géométriques d’une machine électrique en vue de la réduction des vibrations d’origine magnétique, 2006, Université de Jijel.
    • MERABET Djiad, Université de Jijel, Soutenu le 20/12/2005. Modélisation des phénomènes vibratoires d’origine magnétique dans une machine électrique, 2004, Université de Jijel.
    • FERKHA Nassira, Université de Jijel, Soutenu le 20/5/2004. Modélisation des phénomènes vibratoires d’origine magnétique dans une machine électrique, 2004, Université de Jijel

     

    Mémoire de magister encadres par le Prof. Lebaroud abdesselam

    • Bounama Mohamed :  » Classification des défauts de la machine asynchrone par les modèles de Markov cachés », université Skikda, soutenu le 21/02/2013.
    • Abla Bouguerne: » Diagnostic automatique des défauts des moteurs asynchrones », Département électrotechnique, université Mentouri de Constantine, soutenu le 03/12/2009.     

    Thèses encadrées par le Prof. Djamel Hamana 

    •  Melle Nebti Samia de novembre 1990 à mai 1995 (Thèse soutenue avec mention très honorable le 07/06/95 à l’Institut de Physique de l’Université de Constantine).
    • Mr Boumerzoug Zakaria de décembre 1992 à mai 1998 (Thèse soutenue avec  mention très honorable le 30 septembre 1998 à l’Institut de Physique de l’Université de Constantine)
    • Mr Bouchear Merzoug de décembre 1994 à décembre 1999 (Thèse soutenue avec mention très honorable le 13 juin 2000 au département de Physique de l’Université  Mentouri de Constantine).
    • Mr Boutefnouchet Abdelatif de décembre 1992 à juin 2001 (Thèse soutenue avec mention très honorable le 05 janvier 2002 au département de Physique de  l’Université Mentouri de Constantine).
    • Melle Boufenghour Mounira depuis Novembre 2001, Thèse soutenue avec  mention très bien le 25 Juin 2005 au département de Physique de l’Université Mentouri de Constantine).
    • Melle  Azizi Assia, depuis Novembre 2003, Thèse soutenue avec mention très bien le 04Juin 2007 au département de Physique de l’Université Mentouri de Constantine).
    • Mr Hayoune Abdelali, Thèse soutenue avec mention très bien le 15 Avril 2009 au  département de Physique de l’Université Mentouri de Constantine).
    • Melle  Amiour Leila, Thèse à soutenue le 10 Juin  2009 au département de Physique de l’Université Mentouri de Constantine) avec mention très honorable.
    • Melle  Boumaza Leila, Thèse  soutenue le 09 Juin  2009 au département de Physique de l’Université Mentouri de Constantine) avec mention très honorable.
    • Mme Belamri Zehira, Thèse soutenue le 20/03/2013 au département de Physique de la   Faculté des Sciences Exactes de l’Université Constantine 1 avec mention très bien.
    • Melle Chetibi Loubna, Thèse soutenue le 13/01/2013 au département de Physique de l’Université Constantine 1 avec mention très honorable.
    • Mr  Hachouf Mohamed, inscrit depuis Nov.  2008, thèse examiné au Conseril scientifique de la faculté des sciences excates avec avis favorable pour le 20 mai 2015.

     —————————————————————————————————–

    •  Melle  Amrane Chahira, inscrite depuis Nov.  2012
    • Melle  Lamira Imène, inscrite depuis Nov.  2012
    • ZINE Abderraouf, inscrit depuis Déc. 2014
    • LAOUAR Belkacem, inscrit depuis Déc. 2014
    • HABBECHE Yacine Lazhar, inscrit depuis Déc. 2014
    • MESSAI Imed, inscrit depuis Déc. 2014

     

    Thèses encadrées par le Pr. Dr. KHALFALLAH SALAH

    • Mme Khellaf Nadia, Université de Sétif. Comportement non linéaire géométrique et matériel des anneaux de tenségrité : relâchement et plastification des câbles »
    • BEN SABRA Karim, Université de Jijel. Etude et protection contre la corrosion des aciers d’armature dans le béton en atmosphère marine : corrélation caractéristiques physicochimiques du béton –taux de chlorures à l’interface métal-béton »
    • Mlle BELHEINE Noura, Université de Constatine Modélisation des milieux granulaires par une méthode aux éléments discrets avec une loi de contact.
    • MADI Rafik, Université de Guelma Renforcement d’une poutre en béton armé par lamelles en composite- Etude analytique et numérique.
    • MADI Rafik, Université de Guelma Renforcement d’une poutre en béton armé par lamelles en composite- Etude analytique et numérique.

     

    Thèses encadrées  par le Prof. Lebaroud abdesselam

                           Doctorat en Sciences

    1. Medoued Ammar,  » surveillance et diagnostic des défauts des machines électriques : applications aux moteurs asynchrones « , co-encadreur, Département électrotechnique, université Skikda, soutenu le 08/03/ 2012
    2. Boukra tahar  » Pronostic et diagnostic des défauts des machines électrique », Département électrotechnique, université Skikda, 2009, en instance de soutenance. (en cours).
    3. Bouguerne Abla « Classification automatique des défauts des moteurs asynchrones », Département électrotechnique, université Constantine, 2009, en cours.
    4. Bounama Mohamed « Classification non supervisée des défauts des machines électriques », Novembre 2013.

                          Doctorat LMD

    1. Guarboussa Faouzi, « Détection automatique et pronostic des défauts de roulements à billes » Département de génie électrique de l’université Skikda, 1er inscription Avril 2014
    2. Ouanas Ali « Détection et diagnostic des systèmes à énergies renouvelables: Application au système éolien », Co- encadrement, Département de génie électrique de l’université Skikda, 1er inscription Avril 2014.